简要说明：OTTOARC牌的便携式进口电/气动坡口机 12.7~63.5mm ID产品：估价：0，规格：PBM-2500，产品系列编号：007

ID MOUNT / AIR OR ELECTRIC
The PBM-2500 machine is light weight, just 13 lbs. and is designed to bevel boiler tubes. The tool bits are held in by our optional wedge lock system. The torque accepting mandrel with lock in blades (no springs) easily stops any pieces from dropping down into the boiler tube. Our gear drive unit has spiral bevel gears for better torque (more teeth engagement, compared to standard straight gears that other competitors use).
PBM-2500坡口机很轻，只有约13磅（5.90KG）。适用于切削锅炉行业用的管子，其刀头是由楔形锁紧系统固定。芯轴自锁刀具（无弹簧）可防胀块掉落在锅炉管子里。我们的机器采用螺旋锥齿轮驱动，相对于我们竞争对手使用的直齿轮驱动，螺旋锥齿轮驱动可以提供更大的扭矩。
PERFORMANCE:
• Lock in mandrel blades (no springs to lose) • Adjustable keyway on machine and mandrel (eliminates backlash and chatter) • .75 hp pneumatic motor • 13 lbs. approximate working weight • Hardened mandrel 55 Rc. (less chance of gouging with metal chips) • Tool bit is held in by our wedge lock system (keeps the tool bit locked in the cutter head to ensure chatter free bevels) • Single mandrel with mandrel blades to cover size ranges
特性:
 自锁式的芯轴胀块，无弹簧丢失之忧
 可调式键槽结构，消除反冲和抑制震动
 0.75马力的气动马达
 重量轻，仅13磅（5.90KG）
 芯轴硬度高达RC55（不易被切屑刮伤）
 刀具由楔形锁紧系统固定（刀具自锁在转动刀盘上消除震动）
 单个芯轴配合可换式胀块，覆盖了所有的管径
TECHNICAL SPECS:
• Size range 0.5” to 2.5” Pipe (12.7 mm -63.5 mm) 尺寸范围（内径）0.5〞-2.5〞Pipe（12.7mm-63.5mm）
• Max wall thickness to 1"最大壁厚可达0.5〞（12.7mm）
• Air Power requirements: 70 cfm at 90 psi. 气动马达，55cfm 和90psi