详细介绍:测量范围 | 0 - 100 units | 精度 | ±0.5 | 脚盘直径 | 18 mm | 刻度盘尺寸 | 直径:57 mm | 用途 | 测量硫化或热塑橡胶,弹性体,软塑料和硅产品的硬度 |
概述
硬度计是测量物体硬度的仪器,表示材料抵抗硬物体压入其表面的能力。它是金属材料的重要性能指标之一。一般硬度越高,耐磨性越好。根据所测硬度单位:洛氏硬度计、维氏硬度计、显微硬度计、布氏硬度计、邵氏硬度计、巴氏硬度计、里氏硬度计、韦氏硬度计、肖氏硬度计、布洛维硬度。根据使用方式:便携式硬度计、台式硬度计。 进口硬度计美国Check-Line AD-300型硬度计专为测量硫化或热塑橡胶,弹性体,软塑料和硅产品的硬度而设计。 The Check-Line AD-300 precision durmometer is designed to measure the hardness of vulcanized or thermoplastic rubbers, elastomeric or soft plastic materials and silicon products via indentation resistance. The Checkline AD-300 durometer meets the requirements of most international standards, including: DIN 53505 (A, D) ISO 868 (A, D) ISO 7619 (A, AO, D) ASTM D 2240 (A, D, C, O)
The AD-300 is German-engineering with the highest build employing an ultra-low friction movement and an indentor machined to the highest standards. Together with the ergonomic enlarged foot this enables you to take highly accurate and repeatable measurements. The AD-300 Hardness Tester is available in Shore A, D, C and O scales Hardness readings are displayed on an easy-to-read analog scale. An optional MEMORY POINTER holds readings until manually reset, allowing the operator to concentrate on the measurement task. The AD-300 Hardness Tester will be delivered with operating instructions, carrying case and manufacturer's certificate. A full calibration certificate can be ordered optionally.
特性
1. Ergonomic barrel and 18mm footer offers stable platform for measurement eliminating "wobble" 2. Large easy to read dial indicator (0-100 units) 3. Memory pointer optionally available 4. Highly accurate and repeatable 5. German-engineered and built 6. Conforms to DIN 53505, ISO 868, ISO 7619 and ASTM D 2240 7. Traceable calibration certificate Optional
参数
Dial face diameter | 57 mm | Total length | 121 mm | Range | 0 - 100 | Footer Diameter | 18 mm | Accuracy | ±0.5 | Weight | 184g | Standards | DIN 53505 (A, D) ISO 868 (A, D) ISO 7619 (A, A, D) ASTM D 2240 (A, D, C, O) |
订货
配件 AD-300-MEM Memory Pointer Option for AD-300 Durometer AD-300-NGC Traceable Calibration Certificate with new AD-300 订货型号 Model | ASTM D2240 | DIN 53505 | ISO 868 | ISO 7619 | AD-300-A | X | X | X | X | AD-300-C | X |
|
|
| AD-300-D | X | X | X | X | AD-300-O | X |
|
|
|
型号
相关型号 OS-300-2 AD-100
尺寸图
|