简要说明：

测量范围	0 - 5 g through 0 - 50 Kg
导轮	可定制
接触角	10℃
测量路径	100, 120 or 150mm
用途	适用于单丝纺织品，铜线，钢丝，综线，碳纤维，胶带，皮带，薄膜，箔和磁带的张力测量

概述

张力仪是测量丝网受到拉力作用时其内部与固定丝网接触体之间的相互牵引力大小的仪器。张力仪有机械式和电子式两种，测量张力的单位用牛顿/厘米表示。张力也可以用相对数值来表示。厘米张力仪就是用相对数值表示张力的一种，是通过张力仪自身重量使丝网下沉的深度的数值(毫米)来计算，张力数值可从指示盘上直接得到，或者从控制盘上间接得到。张力仪有手工操作和机械操作两种。张力仪是检验丝网印版质量的重要的检测仪器。为保证得到制版要求的张力，在绷网过程中或绷网后都要使用张力仪测量。

德国Honigmann专注于卷材张力检测和张力控制有超过60年历史，是世界最大张力测量仪表生产商。旗下热销产品有皮带张力计133-33适用于单丝纺织品，铜线，钢丝，综线，碳纤维，胶带，皮带，薄膜，箔和磁带的张力测量。

Honigmann 133-33 Available in 6 load ranges

0 - 5 g through 0 - 50 Kg

133-33 the angled design utilized in this series gives users a general-purpose sensor with a narrow profile. This makes for convenient measurement operations even where space is restricted - typical when measuring woven tapes and web threads.

The range of applications for this series of sensors covers extensive areas in research, quality control and production in the wire, cable, film and textile industries and the like.

特性

• for measuring monofilament textiles, copper- and steel wires, healds, carbon fibres up to 2.0 mm ?, as well as tapes, belts, thread groups, films, foils, magnetic tapes, etc.

• customized guide rollers optional

• easy handling even when inserting into running products in cramped quarters

• effective overload protection for uninterrupted availibility

• measuring path: 100, 120 or 150mm

• smallest possible angle of contact (10°) means minimum impact by:

  inherent stiffness

  acceleration torques

  inertial forces due to deflection

• 3 ball-bearing aluminium rollers with V-groove, root ? 16mm

• excellent long-term stability and high precision for reproducible measuring results

• diameter, stiffness, weight and speed of the product being measured have no influence on measuring accuracy

参数

订货

订货型号

133-33

型号

相关型号

D-485

TM-353

MU510-19

尺寸图