简要说明：

最大电压	15 V
接桥类型	175 ohm
线性度	< ±.02%
载荷因素	可模拟1、2、3、4或8个350Ω，2、4、6、8或16个700Ω称重传感器
接线	6通接线柱，适合松动接线和橡胶插头

概述

传感器模拟器可模拟应变式称重、测力、压力、扭矩、加速度等各种传感器的标准输出信号，用来校准、检验相应的指示仪表，调试各种自动衡器和自动化系统。

不仅如此，美国Rice Lake Transducer Simulator 4还可以测量供桥电压、环境温度，并去油可编程功能，是一款高性能、高准确度、多用途的应变传感模拟器，内部分辨率已达到了100码。

传感器模拟器的主要功能是输出一个标准的应变传感器信号，用来检查仪表在各种不同的测试条件下是否都能符合标准的要求。

An all-in-one carrying case provides the portability and convenience required by field technicians. The Transducer Simulator 4 is a fully functional simulator, for replicating a wide range of load cell scenarios.

特性

• Designed for high accuracy

• Sealed lid with neoprene O-ring

• Dustproof and crush tested to 500lb

• Four operational modes including vernier adjustment, calibrated adjustment, 0.25mV/V offset and 0.50mV/V offset

• Ideal for setpoint or batching simulation

  
  

参数

Maximum Voltage:

15V

Bridge Type:

175 ohm star

Linearity:

Less than ±.02% full scale

Temperature Coefficient:

Absolute 5 ppm/°C; Tracking less than 0.5 ppm/°C

Variable Ranges:

Choose any fixed setting ±0.25mV/V or 0.50mV/V through a 10-turn wire-wound

potentiometer with locking clutch

Load Factors:

Simulates 1, 2, 3, 4 or 8 350-ohm load cells or 2, 4, 6, 8 or 16 700-ohm load cells

Calibrated Offset:

+0.25mV/V for use with digitally calibrated meters requiring positive dead load

for calibration

Connectors:

Six-way binding posts, suitable for loose wires or banana plug

Warranty:

One-year limited warranty

订货

订货型号

22513   Simulator,Scale-Pro 4 Transducer 0-3mV/V W/Vernier Control From -.50mV/V To +3.5mV/V Simulates 1,2,3,4 or 8 Load Cells NEMA 4X

型号

相关型号

Ranger 1

Ranger 3

Ranger 5

Ranger 7

尺寸图

详情请联系我们