详细介绍：测量范围 | 0.025 to 19.999 inches (0.63 to 500 millimeters) | 分辨率 | 0.001" (0.01 mm) | 速度范围 | 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec | 探头 | 5 MHz, 0.25" Diameter (6.35 mm) | 用途 | 用于钢铁探伤，缺陷和涂层厚度检测 |
概述
Measuring Range in Steel Pulse-Echo Mode (Pit & Flaw Detection) measures from 0.025 to 19.999 inches (0.63 to 500 millimeters) Echo-Echo Mode (Through Paint & Coatings) measures from 0.1 to 1 inch (2.54 to 25.4 millimeters) (range depends upon probe selected) 5 year warrantyThe new CHECK-LINE TI-25M-MMX Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side! Checkline TI-25M-MMX can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed. The TI-25M-MMX probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.
特性
Ability to measure through paint and eliminate coatings Resolution of 0.001 inch (0.01 mm) Large, backlit LCD display retains last reading CE-Certified Special-purpose probes are offered for a variety of applications Switch-selected units for inches or mm For underwater surveying, probe cable lengths up to 50 feet are optionally RS-232 output to transfer individual data values Includes NIST-Traceable Calibration Certificate IP 65 Rated
参数
Range | Pulse-Echo Mode(Pit & Flaw Detection) measures from 0.025 to 6.000 (up to 19.999 inches if uncoated using T-102-2000 probe)
0.63 to 150 millimeters (up to 500 mm if uncoated using T-102-2000 probe).To measure down to 0.025"/1.00mm, requires use of T-102-3300 Probe
<="" td=""> | Resolution | .001" (0.01 mm) | Display | 4? - Digit, 0.5" Backlit LCD | Velocity Range | 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec | Probe | 5 MHz, 0.25" Diameter (6.35 mm) | Probe Wearface | PEEK (Polyethlethylketone) | Cable | 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). | Output | RS-232, single value when send key is pressed | Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C)
Material: 0 to 200° F (-20 to 100° C) Special high temperature probes are optionally available | Battery Type | Two AA batteries | Battery Life | 200 hours | Weight | 7 ounces (196 g) | Size | 2.5 x 4.5 x 1.25"
(64 x 114 x 32 mm) | Accessories Included | Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. | Warranty | Gauge: 5 Years
Probes: 90 Days |
订货
订货清单 The TI-25M-MMX is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case. 配件 TICC-M Protective Holder for Most TI Series Gauges CF12 Coupling Fluid - 12oz V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only) T-102-2700 1/4" diameter, 5.00 MHz, dual element, Hi-Damped transducer T-104-9700 1/2" diameter, 3.5 MHz, dual element, Hi-Damped transducer T-212-2001 1/4", 5 MHz Hi-Temp (900 F / 500 C) Transducer N-306-0010 6 foot RS232 Cable (DB-9 to Lemo 2 pin) 订货型号 TI-25M-MMX Through-Paint Ultrasonic Thickness Gauge Kit with T-102-2700 Probe TI-25M-MMX-EXT Through-Paint Ultrasonic Thickness Gauge Kit with T-104-9700 Probe
型号
相关型号 TI-25LT TI-25S TI-25M TI-25DL TI-25DL-MMX
尺寸图
| 
放大图片
暂无相关下载
