详细介绍：测量范围 | 0.025 to 19.999 inches (0.63 to 500 millimeters) | 分辨率 | 0.001" (0.01 mm) | 速度范围 | 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec | 探头 | 5 MHz, 0.25" Diameter (6.35 mm) | 用途 | 用于钢铁，铝，不锈钢，PVC，聚氨酯的壁厚和腐蚀检测 |
概述
The Check-Line TI-25S is ideal for the person that tests a few different materials regularly. The TI-25S contains 8 velocities of the most common materials (refer to complete list of Materials below) and two velocities that the user can set using a simple software program. The tool's backlit display is easy to read, even in dim light, and the unit operates for up to 200 hours on a single set of batteries. The Checkline TI-25S comes complete, ready to use, and is protected by our 5 year limited warranty.
特性
Multi-function 4.5 digit liquid crystal display with 0.500 inch numerals, backlit for use in poor light conditions. Measurements displayed in inches, inches/microsecond, millimeters, and meters/second. Measures from 0.025 to 6.000 inches (0.60 to 150.0 millimeters) switch to select English or metric units. Four readings per second for single point measurements. 8 pre-set velocities and 2 custom velocities Ability to change between velocities without the use of computer software IP 65 Rated
参数
Range in Steel | 0.025-6.00" (0.60-150.0 mm) Will vary in other materials | Resolution | .001" (0.01 mm) | Velocity Range | 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec | Dimensions | 2.5 W x 4.75 H x 1.25 D inches | Display | 4? - Digit, 0.5" Backlit LCD | Probe | 1/4", 7.5 MHz, actual wearface is 3/8" (10 mm)
Probe P/N: T-102-3300 | Cable | 4 ft. (1.2 m) waterproof cable with non-polarized, quick-disconnect connectors. Optional lengths up to 50 ft. (15 m). | Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C)
Material: -0 to 200° F (-20 to 100° C
Special high temperature probes are optionally available. | Battery Type | Two 1.5V alkaline or 1.2V NiCad AA cells. | Battery Life | Typically operates for 200 hours on alkaline and 130 hours on NiCad. | Weight | 10 ounces (283 g) | Accessories Included | Probe/cable assembly. 4 oz. bottle of coupling fluid, NIST Calibration Certificate, 2 AA batteries, operating instructions, hard-plastic carrying case. | Warranty | Gauge: 5 Years
Probes: 90 Days |
订货
订货清单 The TI-25S is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, PC-based Software, NIST-Traceable Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case. 配件 TICC-M Protective Holder for Most TI Series Gauges CF12 Coupling Fluid - 12oz V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only) T-102-3300 1/4" diameter, 7.5 MHz, dual element transducer (Standard Probe for TI-25S) DATACOMM PC Program to download Custom #1 & Custom #2 calibrations to TI-25S (N-306-0010 cable must be ordered) N-306-0010 6 foot RS232 Cable (DB-9 to Lemo 2 pin) BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit 订货型号 TI-25S Ultrasonic Thickness Gauge Kit with T-102-3300 Probe
型号
相关型号 TI-25M-UWM TI-25-UM-50 TI-25LT TI-25P TI-25M TI-25DL TI-25M-MMX TI-25DL-MMX
尺寸图
|
放大图片
暂无相关下载
