详细介绍：测量范围 | 0.040 - 8.000" (1.0 - 200.0 mm) | 分辨率 | 0.001" (0.01 mm) | 速度范围 | 0.0492 to .3936 in./ms 1250 to 9999 meters/sec | 探头 | Dual Element (1 to 10 MHz). | 用途 | 用于涂层，壁厚与腐蚀检测 |
概述
TI-CMXDLP - Black & white model TI-CMXDLP-C - Color model The new CHECKLINE? TI-CMXDLP is the top-of-the-line model in the CMX Series of Gauges that measures both coating and wall thickness quickly and accurately—from only one side. In addition, when switched to Pulse-Echo mode, the Check-Line TI-CMXDLP automatically measures and eliminates the coating from the wall thickness measurement, enabling the user to locate the finest corrosion and pitting—without removing the coating. It features an A-Scan Display Mode allowing the user to see the actual wave form echoes, graphically, providing the insight necessary to tune the settings on the gauge for optimal performance. This is especially important on challenging measurement tasks. The TI-CMXDLP also features a new E-EV Operating Mode ("Echo-Echo-Verify"), also known as Triple-Echo Mode, which provides addition assurance that the displayed measurement is accurate and fully verified by subsequent echoes. Oversized graphic LCD is backlit and features easy to read fonts, graphics and display codes showing all critical settings including Velocity, Operating Mode, Alarms, Scan Mode and more. The backlight can be set to ON (always-on), OFF (always-off) or AUTO (automatically-on when measuring).
特性
Wide variety of Probes, both DUAL-ELEMENT and SINGLE-ELEMENT can be used for nearly any application. Auto probe recognition with Auto Zero or Manual Zero. Bar graph with user-set start end values providing highest resolution around the target thickness value. Differential Mode allows user to set a "target thickness value" and display will show the DIFFERENCE between actual and target thickness as a plus or minus value. 64 custom setups can be stored and retrieved for convenient use and labeled for easy identification Display Hi/Lo Alarm Limits with audible and visual indicators. Adjustable Gain in 5 steps (VLow, Low, Med, Hi & VHi) in 2db increments providing a 8 db gain adjust range (42–50 db). Measures Coatings up to 0.100" Metal housing provides strong protection against harsh environments. T-8071-0868 Probe to 1"-1MHz Single-Element Membrane Probe to measure Blow Holes in Thick PE Pipes and Fittings 2 Year Warranty, CE-Certified and includes NIST-Traceable Calibration Certificate. IP 65 Rated
参数
Range in Steel: | Pulse-Echo Mode: Pit and Flaw detection measures from 0.025 - 9.999inches (0.63 to 254 millimeters)
Echo-Echo Mode: Thru Paint & coatings measures from 0.100 - 4.000 inches (2.54 to 102 mm). Range will vary depending on the thick | Range in Coating Only Mode | 0.0005" - 0.1000" / Resolution: 0.0001"
(0.013 - 2.540 mm / Resolution: 0.001 mm) | Max Coating | 0.100" | Resolution: | .001 inches (0.01mm) | Velocity Range: | .0492 to .3936 in./ms
1250 to 9999 meters/sec | Units: | Inch or mm | Measurement Modes: | - Pulse-Echo (corrosion mode)
- Pulse-Echo Coating (Corrosion w/o coating)
- Echo-Echo (thru-paint)
- Temp Comp (auto adjust for material temp)
- Coating Only (Ultrasonic Coating Gauge) | Transducer Types: | Dual Element (1 to 10 MHz). | Output | RS-232 for upload/download of setups | Memory capacity: | TI-CMXDLP: over 200,000 measurements | Power Source: | Three 1.5V alkaline or 1.2V NiCad AA cells | Battery Life: | Typically operates for 150 hours on alkaline and 100 hours on NiCad | Auto Power off: | After 5 minutes of non-use | Display: | 1/8 in. VGA grayscale display 62 x 45.7mm | Keyboard: | Membrane switch with twelve tactile keys | Case: | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). | Temp. Limits | Ambient: -20 to 120° F (-30 to 50° C)
Material: -0 to 200° F (-20 to 100° C
Special high temperature probes are optionally available. | Weight, net: | 383 grams | Dimensions: | 63.5 W x 165 H x 31.5 D mm | Warranty: | 2 year limited | Certification: | CE Approved, Factory calibration traceable to national standards |
订货
订货清单 The TI-CMXDLP is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, operating manual, Software, RS-232 output cable, RS-232 to USB adapter, software all in a foam-fitted carrying case. 配件 T-102-2900 1/4" diameter, 5.00 MHz, dual element, through-coating transducer T-104-2900 1/2" diameter, 5.00 MHz Coating Transducer T-104-9900 1/2" diameter, 3.5 MHz Coating Transducer T-102-2900-H 1/4" 5Mhz Coating Transducer for Material Temp up to 300 °F (150 °C) T-212-2001 1/4", 5 MHz Hi-Temp (900 F / 500 C) Transducer TI-CMX-UW-50 1/2" 5 Mhz Hi Damp Coating Probe with 50 ft. underwater cable TICC-MVX Protective Holder for TI-MVX, TI-PVX and TI-MMX-SDL CF12 Coupling Fluid - 12oz CF-4H High Temp Coupling Fluid 4oz (0 - 600 F / -18 to 316 C) CF-4H-950F High Temp Coupling Fluid 4oz (600 - 950 F / 316 - 510 C) V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only) QC2525 Shear Wave Transducer 2.25 Mhz .250" Dia QC3725 Shear Wave Transducer 2.25 Mhz .375" Dia QC5025 Shear Wave Transducer 2.25 Mhz .500" Dia PQC5035 Shear Wave Transducer 3.5 Mhz .500" Dia QC2550 Shear Wave Transducer 5.0 Mhz .250" Dia QC3750 Shear Wave Transducer 5.0 Mhz .375" Dia QC5050 Shear Wave Transducer 5.0 Mhz .500" Dia QC2510 Shear Wave Transducer 10.0 Mhz .250" Dia QC3710 Shear Wave Transducer 10.0 Mhz .375" Dia QC5010 Shear Wave Transducer 10.0 Mhz .500" Dia N-104-0020 LEMO 00 - Microdot Single Probe Transducer Cable, 4 foot length QW2545 Quick Change Wedges 45° .250" Dia QW2560 Quick Change Wedges 60° .250" Dia QW2570 Quick Change Wedges 70° .250" Dia QW3745 Quick Change Wedges 45° .375" Dia QW3760 Quick Change Wedges 60° .375" Dia QW3770 Quick Change Wedges 70° .375" Dia QW5045 1/2"-45 Deg Angle Acrylic Wedge QW5060 1/2"-60 Deg Angle Acrylic Wedge QW5070 Quick Change Wedges 70° .500" Dia T-8071-0868 1.00", 1.00 Mhz, Side, BNC, Comp N-106-0100 BNC - LEMO 00 Single Probe Transducer Cable, 6 foot length BATT-RC4AA-WC 4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit 订货型号 TI-CMXDLP Combination Coating & Wall Thickness Gauge kit with T-102-2900 probe TI-CMXDLP-H Combination Coating & Wall Thickness Gauge with T-102-2900-H High Temp Probe, up to 300 F (150 °C) TI-CMXDLP-C Combination Coating & Wall Thickness Gauge kit with Color LCD and T-102-2900 probe
型号
相关型号 TICC-MVX SB-Series SB4 CF-12 CF-2H CF-4H-950F V-Block TI-CMXDLP
尺寸图
| 
放大图片
暂无相关下载
