详细介绍：测量范围 | 0.63 to 254 millimeters (0.025 - 9.999inches) | 分辨率 | 0.001 inches (0.01mm) | 速度范围 | 0.0492 to .3937 in/μs. 1250 to 10,000 meters/sec | 测量模式 | 脉冲-回波，回波-回波 | 用途 | 用于钢铁上探伤和涂层厚度检测 |
概述
The new CHECK-LINE TI-MVX offers a series of advanced features including A-Scan, B-Scan as well as a complete alphanumeric datalogging system with storage capacity of thousands of data values and A-scan captures. The Checkline TI-MVX features the highest resolution graphic LCD on the market and is especially engineered for optimal ease of use. It is supplied as a complete kit with all accessories in carrying case with FREE software, transfer cable and NIST-Traceable Calibration Certificate.
特性
采用可调式方波脉冲发生器，能够获得最佳的分辨率和穿透能力 多种显示方式：RF射频波形显示、A扫描正/负检波显示、B扫描显示和厚度值大数字显示 A扫描正/负检波显示用于测厚、探伤和腐蚀坑检测 B扫描显示用于显示被测材料的截面形状 自动增益控制功能用于不去除涂/镀层测量基体厚度 可存储64个用户设定值，所有出厂设定值用户都可选择编辑和另存为其它设定值 12000页大存储量数据存储能力（每页可存一个厚度值和一个波形） 高速扫查功能可用于快速找到壁厚的最小值 上/下限声光报警功能 可通过软件与计算机进行数据交换，方便用户打印检测报告 保修两年（主机）
参数
Range in Steel*: | Pulse-Echo Mode: Pit and Flaw detection measures from 0.63 to 254 millimeters (0.025 - 9.999inches)
Echo-Echo Mode: Thru Paint & coatings measures from 2.54 to 102 mm (0.1 - 4.0 inches).
Range will vary +/- depending on the thickness of coating. | Resolution: | .001 inches (0.01mm) | Velocity Range: | .0492 to .3936 in./ms
1250 to 9999 meters/sec | Units: | English & Metric | Measurement Modes: | - Pulse-Echo (flaws, pits)
- Echo-Echo (thru-paint) | Transducer Types: | Dual Element (1 to 10 MHz). | Memory: | 16 megabit non-volatile ram | Memory capacity: | 12,000 pages with 1 reading and waveform per page | Power Source: | Three 1.5V alkaline or 1.2V NiCad AA cells | Battery Life: | Typically operates for 150 hours on alkaline and 100 hours on NiCad | Auto Power off: | if idle 5 min | Display: | 1/8 in. VGA grayscale display 62 x 45.7mm | Keyboard: | Membrane switch with twelve tactile keys | Case: | Extruded aluminum body with nickel-plated aluminum end caps (gasket sealed). | Operating Temperature: | -14° to 140°F (-10° to 60°C) | Weigth, net: | 383 grams | Dimensions: | 63.5 W x 165 H x 31.5 D mm | Warranty: | 2 year limited | Certification: | CE Approved, Factory calibration traceable to national standards |
订货
订货清单 The Check-Line TI-MVX is supplied as a complete kit with the gauge, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST-Traceable Calibration Certificate, data transfer software, serial output cable and Operating Instruction Manual - all in a foam-fitted carrying case. 配件 T-102-2700 1/4" diameter, 5.00 MHz, dual element, Hi-Damped transducer T-104-0000 1/2" diameter, 1.00 MHz dual element transducer T-104-0600 1/2" diameter, 1.00 MHz dual element Composite transducer T-104-1000 1/2" diameter, 2.25 MHz dual element transducer T-044-2000 1/2" 5.0 MHz Hi-Temp (650 F / 344 C) Transducer T-101-2000 3/16" diameter, 5.0 MHz dual element transducer T-102-1000 1/4" diameter, 2.25 MHz, dual element transducer T-102-3300 1/4" diameter, 7.5 MHz, dual element transducer TICC-MVX Protective Holder for TI-MVX, TI-PVX and TI-MMX-SDL V-Block V-Block Transducer Holder (For 3/16" & 1/4" Transducers only) CF12 Coupling Fluid - 12oz N-104-0021 4 ft Cable, Dual Lemo-to-Single Microdot N-110-0020 10' Single Lemo to Microdot Cable USB-RS232-ADAP RS232 to USB Adapter QCR5050 1/2"-5MHz Hi-Res Quick-change Single Element Contact Transducer for use in flaw mode QW5045 1/2"-45 Deg Angle Acrylic Wedge QW5060 1/2"-60 Deg Angle Acrylic Wedge QW5070 Quick Change Wedges 70° .500" Dia T-212-2001 1/4", 5 MHz Hi-Temp (900 F / 500 C) Transducer T-8060-0868 0.750", 1.00 Mhz, Side, BNC, Comp N-104-0021-BNC TI-MVX FLaw Cable, Dual Lemo-00 with BNC Connector 订货型号 TI-MVX TI-MVX Ultrasonic Thickness Gauge WITHOUT PROBE
型号
相关型号 TI-44N TI-25M-UWM TI-25-UM-50 TI-25LT TI-25P TI-25M TI-25DL TI-25M-MMX TI-25DL-MMX
尺寸图 | 
放大图片
暂无相关下载
