简要说明：

测量范围	1.00-199.9 mm
分辨率	0.01 mm
频率	1MHz～10MHz
声速范围	1250～10,000 m/s
功能	壁厚和腐蚀测量，报警功能，RS232串口

概述

Measuring Range in Steel

0.040 - 8.00 inches

1.00 - 199.0 mm

The DAKOTA ULTRASONICS MX-5 Wall Thickness Gauge accurately measures wall thickness and the extent of corrosion of all metals, ceramics, glass and most rigid plastics - from only one side!

The MX-5 can be used in a Single Thickness Reading mode or in a Scan mode , where the probe is dragged over a large measuring area. The minimum thickness reading recorded during the "scan" will be displayed.

The MX-5 probe is waterproof and can be submerged in water. The gauge is impact-resistant and environmentally sealed to provide trouble-free operation under the toughest field conditions.

超声波测厚仪是根据超声波脉冲反射原理来进行厚度测量的，当探头发射的超声波脉冲通过被测物体到达材料分界面时，脉冲被反射回探头通过精确测量超声波在材料中传播的时间来确定被测材料的厚度。凡能使超声波以一恒定速度在其内部传播的各种材料均可采用此原理测量。基于超声波测量原理，可以测量金属及其它多种材料的厚度，并可以对材料的声速进行测量。可以对生产设备中各种管道和压力容器进行厚度测量，监测它们在使用过程中受腐蚀后的减薄程度。

美国Dakota MX-5DL手持式超声波测厚仪是一种可信赖的精密测量工具，无需特别培训即可操作。将探头放到被测材料的上面，就可读出被测材料的厚度，或是沿被测材料的表面拖动探头，测厚仪可以自动找出被测材料的最薄点。除了以上功能外，还新增了下列功能：

l  报警功能：如果测量值小于你输入最小允许值，红灯亮并有声音报警，绿灯亮表示测量在允许范围内。

l  差值方式：显示测量值与预先设定值的差值。

l  RS232口：输出数据到打印机或计算机。

特性

• Resolution of 0.001 inch (0.01 mm)

• Large, backlit LCD display retains last reading

• Simple operator controls virtually eliminate training

• Special-purpose probes are offered for a variety of applications

• Switch-selected units for inches or mm

• CE Certified

• For underwater surveying, probe cable lengths up to 50 feet are optionally

• Differential Mode

• Alarm Mode

• RS-232C Serial output for sending single data points to a printer or computer

• Includes NIST Calibration Certificate

• IP 65 Rated

参数

订货

订货清单

The MX-5 is supplied as a complete kit with the gauge, probe, 4 oz. bottle of coupling fluid, 2 AA batteries, NIST Calibration Certificate, and Operating Instruction Manual - all in a foam-fitted carrying case.

订货型号

配件

探头

型号

相关型号

MX-3

MX-5DL

MMX-6

MMX-6DL

尺寸图