简要说明：

测量范围	接触式：6-99,999 rpm   非接触式：0.8-25,000   rpm
精度	±0.006% of reading ±1 least significant digit
功能	数据采集，USB输出和可编程拓展
激光感应距离	5-400cm
用途	精准测量转速，表面速度和长度

概述

转速计，又名转速表、转速仪，是机械行业必备的仪器之一，用来测定电机的转速、线速度或频率。常用于电机、电扇、造纸、塑料、化纤、纺织、汽车、飞机、轮船等制造业。 大多常用的为手持离心式转速计。

转速计，又名转速表、转速仪，是机械行业必备的仪器之一，用来测定电机的转速、线速度或频率。常用于电机、电扇、造纸、塑料、化纤、纺织、汽车、飞机、轮船等制造业。 大多常用的为手持离心式转速计。美国Checkline旗下的转速计一般为数字式，有接触式和非接触式两种测量。非接触式采用光电器件测量，无连接轴，对被测件无任何影响，提高测量精度。

例如Checkline DT-2100型是一款接触式&非接触式转速计，集成了数据采集，USB输出和可编程拓展三大功能。

The Check-Line DT-2100 is an advanced combination contact / non-contact hand-held tachometer. The DT-2100 features data-logging, USB output and a programmable scaling feature to offset RPM according to application variables. It features a backlit LED Display with upper/lower limit icons and a unique X-Y Graphic mode. Additional display modes unique to the DT-2100 is the "Needle Sweep" and Bar Graph" offers the user a choice of how to view the data. The display can also be inverted to optimize the viewing angle.

In non-contact mode the tachometer measures RPM up to 99,999 RPM at distances up to 13 feet or 500 cm. The DT-2100 can also measure contact RPM, surface speed, or length using the supplied screw-on adapter.

Data logging can be set for single point or continuous logging. Single data points as well as statistics (Max, Min, Average) can be stored in the built-in memory and recalled to the display. Often users need to adjust machinery during testing, with the DT-2100 you can mount it on a tripod, select continuous logging and adjust machinery as necessary. After the test, you can easily review the data on the DT-2100's display or download to a computer using the optional PC Software.

The Checkline DT-2100 is supplied as a complete kit with 2 cone tip adapters, funnel tip adapter, shaft extension, 6 inch circumference surface speed wheel, reflective tape, 2 AA batteries ... all supplied in a foam-fitted carrying case. An NIST-Traceable Calibration Certification is optionally available.

特性

• Data Logging with Continous, Single Unit or Statistics modes

• View data and statistics on tachometer display or with optional Windows software

• Built-in Memory with USB Data Output

• Powerful laser for non-contact measurement 2” to 13.1’ (5 to 400 cm)

• Non-Contact length measuring mode (requires reflective tape or edge of roller)

• Programmable multiplier to convert reading based on wheel diameter, gear ratios, etc...

• On-screen hi-lo limits for pass/fail analysis

• Auto-detection of contact adapter

• Reversible Display

• 1/4-20 Threaded Insert on bottom of housing for fixed-mounting or use on Tripod

参数

订货

订货清单

The DT-2100 is supplied as a complete kit with tachometer, 2 cone adapters, funnel adapter, 3.5” extension shaft, surface speed wheel (6” circumference), reflective tape, 2 AA batteries, contact adapter in a foam-fitted carrying case

配件

DT-2100-OP-PCS  Software for DT-2100 Data Logging Tachometer, includes USB cable. For Windows.   

NISTCAL NIST Traceable Calibration Certificate for DT-2100 Tachometer    

DTCA    Cone Tip for Hand-held tachometers       

DTFA    Funnel Tip for Hand-held tachometers   

DTSX    Shaft Extension for Tachometers, 3 inch       

DT6 6 Inch Circumference Tachometer wheel, 7mm shaft      

DT12    12 Inch Circumference Tachometer wheel, 7mm shaft      

205T    Reflective Tape, 1x7 Inch Strip    

205TS   Reflective Tab Sheet, 35 1/2" x 1/2" Squares

205TS-4 Qty 4 Reflective Tab Sheet, 35 1/2" x 1/2" Squares 

DT-2100-OP-CAS  Screw-On Contact Adapter for DT-2100 Tachometer

DT-TRI-HD   Tripod for Tachometers and Stroboscopes   

BATT-RC4AA-WC   4-pack 2300mAh AA Ni-MH Rechargeable Batteries & Charger Kit

型号

相关型号

CDT-1000HD

CDT-2000HD

PLT-5000

DT-205LR

DT-207LR

尺寸图