| 详细介绍：
Placid Industries工厂上海航欧机电设备有限公司中国区（Non-exclusive）
http://www.placidindustries.com/sales.html
PLACID传动控制器，PLACID离合器 PLACID磁粉离合器PLACID传动控制器，PLACID磁粉制动器, PLACID磁粉离合器, PLACID磁滞制动器, PLACID储存自订离合器和制动器,
PLACID传动控制器 磁粉制动器/离合器：PLACID普莱西德工业公司1973年-成立 , 1981年-制造磁粉离合器和制动器,1990年在欧洲销售通过HucoD ，1994年-制造磁滞制动器,2003年销售大磁粉制动器（千字节）和离合器（架 KC）
PLACID产品特征：由于没有电激励，自由的轴旋转。 随着电子激发，成为轴耦合的情况。 虽然负载转矩小于输出扭矩，轴不会旋转。 当负载转矩的增加，制动将下滑顺着水平的转矩所规定的线圈输入电流。
PLACID公司主要产品：PLACID传动控制器，PLACID离合器 PLACID磁粉离合器PLACID传动控制器，PLACID磁粉制动器, PLACID磁粉离合器, PLACID磁滞制动器, PLACID储存自订离合器和制动器, PLACID
主要型号：
|
|
Machine: Wire EDM (Electric Discharge Machining) machine
Manufacturer: Charmilles
-
Placid part number: B10-18
-
OEM part number: 434234.
Replaces 433833 with no modifications.
-
For machines: FI290, FI300, FI500
-
Coil: 18 volts, Resistance: 38 ohms
-
Case O.D. = 2.36 ", 60 mm
Application - Control tension in wire that cuts metal.
|
|
|
Machine: Photographic film developer
Manufacturer: Kodak
-
Placid part number: B35-EK
-
Replaces: Qualex 2B4473, Electroid 50-EPB30-11-08S-24
-
Coil: 24 volts, Resistance: 50 ohms
-
Case O.D. = 3.375"
Application - Tensions roll of film
|
|
|
Machine: Microfiche (microfilm) duplicator
Manufacturer: Photomatrix (product line now owned by Scan-Optics)
Was sold as a Kodak machine.
-
Placid part number: B35-12-PH
-
OEM part number: Photomatrix 102363
-
Coil: 12 volts, Resistance: 18 ohms
-
Case O.D. = 3.375"
Application - Tensions roll of film
|
|
|
Machine: Digital Printing Press, Quickmaster Di
Manufacturer: Heidelberg
-
Placid part number: B60-HEID
-
OEM part number: A4.114.1420
-
Coil: 12 volts, Resistance: 18 ohms
-
Case O.D. = 4.5 "
Application - Tensions plate material.
|
|
|
Machine: Textile processing machine
Manufacturer: Young Engineering
-
Placid part number: B60-YE-1
-
OEM part number: 26010101
-
Coil: 90 volts, Resistance: 547 ohms
-
Case O.D. = 4.5 "
-
2 brakes per machine
Application - Provides drag torque on 1/2 of a roller to maintain web straightness.
|
|
|
Machine: Pipe bending machine
Manufacturer: Eaton Leonard
-
Placid part number: B115-EL
-
OEM part number: 800469 H, Carriage Brake
-
Coil: 24 volts, Resistance: 36 ohms
-
Case O.D. = 4.5 "
-
2 to 4 brakes per machine
Application - Holds chain connected to carriage & verticle axis stationary while pipe is being bent.
|
|
|
Machine: Beverage container labeling machine
Manufacturer: Trine
-
Placid part number: B150-CMS
-
OEM part number: 4516
-
OEM machine: 4500
-
Coil: 24 volts, Resistance: 55 ohms
-
Case O.D. = 5.2 "
Application - Tensions roll of labels, to be put on soda bottles, etc.
|
|
Machine: Bagger
Manufacturer: Rennco
-
Placid part number: C25-24-W2
-
OEM part number: Unknown
-
Coil: 24 volts, Resistance: 43 ohms
-
Case O.D. = 2-7/8 "
-
Must be mounted with shafts horizontal.
Application - Winds edge of plastic web. Powered by Placid Industries power supply PS-24-M
|
|
|
Machine: Digital Printing Press
Manufacturer: Ryobi
Also sold under Xerox name.
-
Placid part number: C100-PRST1
-
Ryobi part number: 95325004
-
Presstek part numbers: 535454528,
535454528-1, 535454528-2, 535454528-3
-
Replaces Ogura clutch, part number: OPC 100-01
-
OEM machines: Ryobi 3404-DI &
Xerox Docu-Color 233-DI
-
Coil: 12 volts, Resistance: 11 ohms
-
Case O.D. = 4.5 "
Application - Feeding plate material in digital printing press.
|
|
|
Machine: Rewinder
Manufacturer: CTC International, (formerly Compensating Tension Control)
-
Placid part number: C130-90-CTC
-
OEM part number: B31159
-
Coil: 90 volts, Resistance: 633 ohms
-
Case O.D. = 5.20 "
Application - Controls tension on roll. Hollow through-shaft for compressed air, to actuate chuck.
|
|
|
Machine: Digital Printing Press
Manufacturer: Adast (Adamovske Strojirny)
-
Placid part number: C100-ADAST
-
OEM machine: Adast 557
-
Coil: 12 volts, Resistance: 11 ohms
-
Case O.D. = 4.5 "
Application - Feeding plate material in digital printing press.
|
|
Machine: 35mm Photographic Film Splicer
Manufacturer: Gretag
-
Placid part number: 15CC2-24-1F
-
OEM part number: 50-350706-001
-
Coil: 24 volts, Resistance: 205 ohms
-
Case O.D. = 1.437 "
Application - Apply torque to 35mm film bobbin, to determine the direction the film is wound inside the can.
|
|
|
Machine: Daytona USA car racing game
Manufacturer: Sega
-
Placid part number: C-Daytona
-
Part number: Sega 601-7489
-
Coil: 24 volts, Resistance: 31.3 ohms
-
Case O.D. = 3-5/8 "
Application - Connects to the steering wheel.
|
|
|
Machine: Docu-Mate II, Microfilm Machine
Manufacturer: Terminal Data Corp. (TDC)
-
Placid part number: CC30P-10-1
-
OEM part number: 212023
-
Coil: 10 volts, Resistance: 5 ohms
-
Case O.D. = 3-3/4 "
-
2 clutches per machine
-
1 brake per machine, Placid Ind. p/n B25P-10-1, TDC p/n 212022, not shown
Application - Engages motor to belt that transports original paper document.
|
|
|
Machine: Turret-style rewinder
Manufacturer: CTC International, (formerly Compensating Tension Control)
-
Placid part number: CC60P-CTC
-
OEM part number: P1068-19
-
Coil: 90 volts, Resistance: 540 ohms
-
Case O.D. = 3.50 "
-
5 clutches per machine
-
Special low torque version, CC60-CTC-B, for small rolls & light tension, also available.
Application - Machine winds web onto smaller rolls. The clutch drives the small roll, controlling tension.
|
|
|
Left: Clutch CC60-CTC-B
Special low torque, high RPM version
Rated torque = 30 lb.-in.
Right: Clutch CC60P-90-CTC
Standard version
Rated torque = 60 lb.-in.
|
|
Left:
-
Placid name: Rotor
-
Placid part number: R15P-2
-
Accraply part number: 060502
-
Replaces Ogura OPC-15
-
Case O.D. = 1-5/8 "
|
|
Right:
-
Placid name: Stator
-
Placid part number: S15-10
-
Accraply part number: 09741
-
Replaces Ogura OPC-15-01
-
Coil Resistance: 8.4 ohms
-
Case O.D. = 4 "
|
|
|
|
|
|
|
|
|
Rotor & Stator (shown assembled)
Rotor:
-
Placid part number: R30
-
Torque = 30 lb.-inches
-
Case O.D. = 2.149"
Stator:
-
Placid part number: S30
-
Voltage: 6, 12, 24 or 90 D.C.
-
Case O.D. = 4"
|
|
MODEL
(Click p/n
to view
photo)
|
Torque
Range
(oz.-in.)
|
Input
Electric
Power
(watts)
|
Shaft Inertia
(lb.-in.-sec.2)
|
Slip Heat
Dissipation
(watts)
|
Overhung
Load, Max.
(lbs.)
|
Max.
RPM
|
Weight
(lbs.)
|
Data Sheets
|
|
Cover On
|
Cover Off
|
|
H3
|
0.04 - 2.5
|
2.5
|
3.8 x 10-6
|
-
|
5
|
1
|
10,000
|
0.23
|
H3 data sheet
|
|
H11
|
0.3 - 11
|
2
|
36 x 10-6
|
9
|
15
|
4
|
9000
|
0.7
|
H11 data sheet
|
|
H35
|
0.6 - 35
|
6
|
92 x 10-6
|
15
|
25
|
5
|
8000
|
2
|
H35 data sheet
|
|
H85
|
3 - 85
|
5
|
560 x 10-6
|
35
|
60
|
40
|
6000
|
4.5
|
H85 data sheet
|
|
H140
|
4 - 140
|
7
|
970 x 10-6
|
45
|
75
|
40
|
5000
|
6
|
H140 data sheet
|
|
H250
|
6 - 250
|
7
|
290 x 10-5
|
65
|
110
|
50
|
5000
|
9
|
H250 data sheet
|
|
MODEL
|
DRAWINGS
|
|
|
|
|
|
H3
|
DXF
|
DXF
|
DXF
|
|
H11
|
DXF
|
DXF
|
DXF
|
|
H35
|
DXF
|
DXF
|
DXF
|
|
H85
|
DXF
|
DXF
|
DXF
|
|
H140
|
DXF
|
DXF
|
DXF
|
|
H250
|
DXF
|
DXF
|
DXF
|
|
PS
|
|
24 Volt, 0.75 Amp & 12 Volt, 1.25 Amp versions
For all our small brakes & clutches
|
-
Easy to use - The Span adjustment scales output current for small or larger brakes & clutches.
Control Output Current via -
-
Knob (Potentiometer)
-
0-10 Volt Signal - from computer or PLC
-
Follower Arm Potentiometer F-12-6
-
Ultrasonic Sensor U-B.
The Placid Ind. follower arm or ultrasonic sensor connects to the supply for constant tension unwinding / rewinding applications.
More information >>
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PST
|
|
24 Volts, 2, 3, 4 Amp versions
For large brakes & clutches or multilple smaller ones.
|
Control Output Current via -
-
Knob (Potentiometer)
-
0-5 volt, 0-10 volt or 4-20mA DC Signal
More information >>
|
|
|
|
|
PSH
|
|
30 Volts, 2, 3, 5 Amp versions
For large brakes & clutches or multilple smaller ones.
|
Control Output Current or Output Voltage via - Knob (Potentiometer)
More information >>
|
|
MODEL
|
|
|
F-12-6
(Aluminum Case)
|
FM-4-2
(Miniature)
|
|
|
Resistance
|
500 ohm
|
|
|
Electrical Angle
|
65 degrees
|
|
|
Mechanical Angle
|
360 degrees (No stops)
|
|
|
Drag Torque
|
4 oz.-in.
|
1 oz.-in.
|
|
|
Overhung Load
|
20 lbs.
|
2 lbs.
|
|
|
Download set-up
instructions
|
|
|
|
|
|
|
|
|
|
|
|
Ultrasonic Sensor U-B Specifications
Models H11 thru H250 have the Placid Industries Cog-Buster which keeps slip torque smooth.
|
放大图片
