详细介绍:
GEMS紧凑型流量开关F6FS-380 F6177594S
联系人:魏工 电话:15882174684
座机:028-84472033 QQ:2030149354
产品资料:
SDV-SH75 140 120 25 10.5 6 18 36
SDV-SH100 140 120 25 10.5 6 18 36
SDV-SH150 140 120 25 10.5 6 18 43
SDV-SH200 140 120 25 10.5 6 18 43
Checking Operation
Overvoltages
Gradually increase the input from 80% of the setting.
The input will equal the operating value when the input
exceeds the setting and the alarm indicator starts flashing.
Operation can be checked by the relay outputs that will start
after the operating time has passed.
Undervoltage
Gradually decrease the input from 120% of the setting and
check the operation using the same method as for
overvoltage.
Example: Overvoltage Operating Mode and an Operating Time of 5 s
Note: K8AB-VS@ output relays are normally operative.
Connection Diagram
How to Measure the Operating Time
Overvoltage
Change the input suddenly from 0% to 120% of the set
value and measure the time until the Unit operates.
Undervoltage
Change the input suddenly from 120% to 0% of the set
value and measure the time until the Unit operates.
Operating Adjustment Knobs
Use a screwdriver to turn the knobs. There is a stopper to
prevent the knob from turning any further once it has been
turned completely to the left or right. Do not force the knob
past these limits.
Detecting Current with a Current Splitter
An example of detecting an overload is shown below.
SDV-SH300/-SH500 (60-mV Rating)
Current terminal: M10 screw (SDV-SH300),
M12 screw (SDV-SH500)
Voltage terminal: M4 screw
A
B
C
D
E
SDV-SH750/-SH1000 (60-mV Rating)
Current terminal: M12 screw
Voltage terminal: M5 screw
|