简要说明：铭昌牌的精品荣誉推出CDHD-40/24III-A5船用充电电源@欢迎咨询产品：估价：4800，规格：CDHD-40/24III-A5 ，产品系列编号：66332032650

　　公司名称：西安铭昌电子科技有限公司
联系人：杨经理
联系电话：18729591056
固定电话：029-88668398
在线QQ：972200503
地址：西安市碑林区西荷花园3号楼21层2号

一、概述：

I.General

CDHD是应用高频 PWM 脉宽调制技术，以 IGBT、场效应功率管和脉宽调制集成控制器为主要部件而构成的开关电源式多功能充电电源。它省去了笨重又有噪音的工频变压器，使得整机重量只有可控硅充电电源的四分之一，3KW的CDHD充电电源整机重量8公斤。另外电源还提供有多个功能模块选配，整机采用智能冷却，即使在最高温的机舱内也能保证电源可靠工作。CDHD系列电源满足中国船级社的各种规范规则，符合船用电气及规范的基本标准。

CDHD applies Pulse Width Modulation (PWM) technology, beingmultiple-function switching charging power supply with IGBT, MOSFET and PWMintegrated controller as main parts. Heavy power frequency transformer withnoise is not used, which makes the weight of the whole set be 1/4 of siliconcontrolled charger. The whole set of 3KW CDHD charging power supply weighs 8 kilograms.The power supply also provides several function modules for matching. The wholeset adopts smart cooling process, therefore the power supply could workreliably in engine room with the highest temperature. CDHD series power supplymeets all the specifications and rules of China Classification Society andbasic standards of marine electric standards.

产品型号编制方法

Methodfor Product Model Designation

本充电电源为三阶段自动充电电源（恒流均衡充电-恒压均衡充 电-浮充电）如下图所示。对电瓶充电的全过程是先进入均衡 充电，自动完成先恒流，后恒压，待电流降到接近零时均衡充 电完成，令其（手动或自动）转入“浮充”，以涓流维持电瓶在 满充状态。其充电详细过程如下：

Three stages of the automatic chargingpower supply are constant-current equalizing charge, constant-voltageequalizing charge and floating charge as shown in the following figure. Thewhole process of battery charge is to enter the mode of equalizing charge firstand automatically finishes the constant-current and then constant-voltagecharge. The equalizing charge is finished when the current is near zero, andthe mode should be transferred into “Floating charge” (manually orautomatically). The trickle maintains the status of full charge. The detailedprocess of charge is as follows:

以24V铅酸蓄电池为例，过程是：接好电池，开启后，充电电源软启动，电压从21.6V(电池放电下限值)开始上升，充电电流逐步增大到额定恒流值，充电电源进入恒流充电过程，此后充电电压逐渐升至28.2V（均充电压值），此恒流充电过程一般情况下约需1～2小时；然后，充电电源进入均衡充电过程，在此过程中，充电电流逐渐缓慢下降，电源退出恒流工作，此时电源电压不变，进入到恒压均衡充电状态，此充电过程约需4～6小时，随着电流的进一步减小到额定电流的十分之一时，电源自动判断为电池已充好，电源自动转为浮充阶段，即输出电压将为26.4V,充电电流则进一步减小甚至为零，在没有外部变化情况下，此后电源一直维持这种状态，补充电池的自耗电。采用这种充电方式能够较快、均衡的对电池组进行充电，充满后充电电源能自动转换到浮充，维持电池正常电压避免出现电池过充，从而实现无人值守充电工作方式。

Take the 24V lead acid battery asan example: the process is that when the batteries are connected and turned on,soft starting of the charging power supply is finished; voltage rises from21.6V (lower limit of battery discharge); current increase steadily to ratedvalue of constant current; charging power supply enters into process ofconstant-current charge; the charge voltage gradually rises to 28.2V (averagevoltage charge voltage), and the constant current charge usually lasts for 1-2hours. Then the charging power supply enters the process of equalizing charge,and in the process the current gradually falls; the constant-current work ofpower supply ends. The power supply keeps being unchanged, and enters into thestatus of constant-voltage equalizing charge; the process lasts for 4-6 hours;as the current further falls to be 1/10 of the rated current value, the batteryis automatically regarded as fully charged, and the power supply enters thestage of floating charge, i.e. the output voltage will be 26.4V and the chargecurrent further falls to zero; then the power supply keeps the status to supplythe self-consumption. The manners enable fast and equalizing charge of battery,and the charging power supply automatically switches into status of floatingcharge to maintain the usual voltage of battery and avoid overcharging, thusthe method of charge without people’s supervision is realized.

备注：对不同种类的蓄电池其充电方式和充电电压是不同的。

Notes: Charge methods and voltageof various types of battery are different.

本充电电源的电原理方框图如下示：Block diagram ofelectric principle of the charging power supply is as follows: