西门子通讯电缆玻璃光缆现货产品展示-西门子通讯电缆玻璃光缆现货资料-西门子通讯电缆玻璃光缆现货招商信息-

SIMATIC NET FC FO 标准电缆（62.5/200/230），标准电缆，可剥离，UL 认证，最大长度：1000m，最小订购： 20m，按米销售

显示价格
按一下下面的“可用性细节”链接，来获得额外的可用性信息

6XV1847-2C

FC FO 拖缆（62.5/200/230），拖缆，可剥离，按米销售，最大长度： 1000 m，最小订货长度： 20 M

Order No.	6XV1 873-2A	6XV1 873-2B	6XV1 873-2G
Product type descrtption	FO Standard Cable GP	FO FRNC Cable	FO Ground Cable
Suitability for use	Universal cable for installation indoors and outdoors	Halogen-free cable for installation indoors and outdoors	Waterproof cable (lengthwise and sideways) for use outdoors with non-metallic protection against rodents for laying into the ground.
Type of assembled fiber-optic cable	Sold by the meter; pre-assembled with 4 BFOC or SC connectors	Sold by the meter	Sold by the meter; pre-assembled with 4 BFOC or SC connectors
Designation of fiber-optic cable	AT-W(ZN)YY 2x1G50/125	AT-W(ZN)HH 2G50/125 UV	AT-WQ(ZN)Y(ZN)B2Y 2G50/125
Electrical data
Attenuation measurement per length
at 850 nm	2.7 dB/km	2.7 dB/km	2.7 dB/km
at 1300 nm	0.7 dB/km	0.7 dB/km	0.7 dB/km
Bandwidth length product
at 850 nm	600 Mhz*km	600 Mhz*km	600 Mhz*km
at 1300 nm	1200 Mhz*km	1200 Mhz*km	1200 Mhz*km
Mechanical data
Number of fibers per fiber-optic cable	2	2	2
Design of optical fibers	Multi-mode gradient fiber 50/125 µm	Multi-mode gradient fiber 50/125 µm	Multi-mode gradient fiber 50/125 µm
Design of optical fiber core	Hollow core, filled, diameter 1400 µm	Hollow core, filled, diameter 1400 µm	Hollow core, filled, diameter 1400 µm
Type of fiber-optic cable	Segmentable	Segmentable	Segmentable
Material
of the FOC core sheath	PVC	FRNC	PVC
of the fiber-optic cable sheath	PVC	FRNC	PE
of the strain relief	Aramid fibers	Aramid fibers	Aramid fibers
Color
of the FOC core sheath	orange/black	orange/black	orange/black
of the fiber-optic cable sheath	green	green	black
Outer diameter
of the FOC core sheath	2.9 mm	2.9 mm	2.9 mm
of the cable	-	9.2 mm	10.5 mm
Thickness of the cable	4.5 mm	-	-
Width of the cable	7.4 mm	-	-
Weight per length	40 kg/km	85 kg/km	90 kg/km
Tensile load, max.	500 N	1200 N	800 N
Lateral force per length	300 N/cm	500 N/cm	300 N/cm
Bending radius
for one-off bending	65 mm	90 mm	105 mm
for repeated bending	-	135 mm	155 mm
Ambient temperature
during installation	-5 … +50 °C	-5 … +50 °C	-5 … +50 °C
during operation	-25 … +80 °C	-40 … +70 °C	-40 … +75 °C
during storage	-25 … +80 °C	-40 … +70 °C	-40 … +75 °C
during transport	-25 … +80 °C	-40 ... +70 °C	-40 … +75 °C
Transmission link
for 1000BaseLX	2000 m	2000 m	2000 m
for 1000BaseSX	750 m	750 m	750 m
Fire behavior	Flame retardant acc. to IEC 60332-1	Flame retardant to IEC 60332-1 and IEC 60332-3 Category A/F	-
Chemical resistance
to mineral oil	conditional resistance	conditional resistance	resistant
to grease	conditional resistance	conditional resistance	resistant
Radiological resistance to UV radiation	Yes	Yes	Yes
Product property
halogen-free	-	Yes	-
impact-resistant	-	-	-
Silicone-free	Yes	Yes	Yes
Certificate of suitability
UL Approval	Yes/OFN (NEC Article 770, UL 1651)	Yes/OFN (NEC Article 770, UL 1651)	-
CSA approval	Yes/ OFN, 90ûC, FT1, FT4 (CSA-Standard C22.2 No232-M1988)	Yes/ OFN, (CSA-Standard C22.2 No232)	-
Product component, rodent protection	-	-	Yes

Order No.	6XV1 873-2C	6XV1 873-2D
Product type descrtption	FO Trailing Cable	FO Trailing Cable GP
Suitability for use	Cable for use in cable carriers for high mechanical loading, PUR outer sheath, no UL approval	Cable for use in cable carriers for low mechanical loading, PVC outer sheath, UL approval
Type of assembled fiber-optic cable	Sold by the meter; pre-assembled with 4BFOC or SC connectors	Sold by the meter; pre-assembled with 4BFOC or SC connectors
Designation of fiber-optic cable	AT-W(ZN)Y(ZN)11Y 2G50/125	AT-W(ZN)Y(ZN)Y 2G50/125
Electrical data
Attenuation measurement per length
at 850 nm	2.7 dB/km	2.7 dB/km
at 1300 nm	0.7 dB/km	0.7 dB/km
Bandwidth length product
at 850 nm	600 Mhz*km	600 Mhz*km
at 1300 nm	1200 Mhz*km	1200 Mhz*km
Mechanical data
Number of fibers per fiber-optic cable	2	2
Design of optical fibers	Multi-mode gradient fiber 50/125 µm	Multi-mode gradient fiber 50/125 µm
Design of optical fiber core	Hollow core, filled, diameter 1400 µm	Hollow core, filled, diameter 1400 µm
Type of fiber-optic cable	Segmentable	Segmentable
Material
of the FOC core sheath	PVC	PVC
of the fiber-optic cable sheath	PUR	PVC
of the strain relief	Aramid fibers	Aramid fibers
Color
of the FOC core sheath	orange/black	orange/black
of the fiber-optic cable sheath	green	green
Outer diameter
of the FOC core sheath	2.9 mm	2.9 mm
of the cable	10.5 mm	10.5 mm
Weight per length	90 kg/km	90 kg/km
Tensile load, max.	800 N	800 N
Lateral force per length	400 N/cm	400 N/cm
Bending radius
for one-off bending	200 mm	200 mm
for repeated bending	200 mm	200 mm
Number of bending cycles	5000000	3500000
Impact strength test
Impact energy	-	-
Number of impacts	-	-
Hammer wheel diameter	-	-
Ambient temperature
during installation	-5 … +50 °C	-5 … +50 °C
during operation	-40 … +80 °C	-25 … +80 °C
during storage	-40 … +80 °C	-25 … +80 °C
during transport	-40 … +80 °C	-25 … +80 °C
Transmission link
for 1000BaseLX	2000 m	2000 m
for 1000BaseSX	750 m	750 m
Fire behavior	-	Flame retardant acc. to IEC 60332-1
Chemical resistance
to mineral oil	resistant	conditional resistance
to grease	resistant	conditional resistance
Radiological resistance to UV radiation	Yes	Yes
Product property: silicone-free	Yes	Yes
Certificate of suitability
UL Approval	-	Yes/OFN(NEC Article 770, UL 1651)
CSA approval	-	Yes/ OFN, 90ûC, FT1, FT4 (CSA-Standard C22.2 No232-M1988)
Product component, rodent protection	-	-

Order No.	6XV1 820-7AH10	6XV1 820-5AH10
Product type descrtption	INDOOR Fiber Optic Indoor cable	Fiber Optic Standard cable
Suitability for use	Non-crush, halogen-free and fire-retardant cable for indoor installation	Universal cable for installation indoors and outdoors
Type of assembled fiber-optic cable	Sold by the meter, pre-assembled with 4 BFOC connectors	Sold by the meter, pre-assembled with 4 BFOC connectors
Designation of fiber-optic cable	T-VHH 2G62.5/125 3.2B200+0.9F600 F TB3 OR FRNC	AT-VYY 2G62.5/125 3.1B200 + 0.8F600 F
Electrical data
Attenuation measurement per length
at 850 nm	3.1 dB/km	3.1 dB/km
at 1300 nm	0.8 dB/km	0.8 dB/km
Bandwidth length product
at 850 nm	200 Mhz*km	200 Mhz*km
at 1300 nm	600 Mhz*km	600 Mhz*km
Mechanical data
Number of fibers per fiber-optic cable	2	2
Number of fibers per fiber-optic cable	-	-
Number of fibers per fiber-optic cable	-	-
Number of conductors in fiber-optic cable	-	-
Design of optical fibers	Multi-mode gradient fiber 62.5/125 mm	Multi-mode gradient fiber 62.5/125 mm
Design of optical fiber core	Fixed core	Compact core
Type of fiber-optic cable	Segmentable inner conductor	Segmentable outer conductor
Material
of the FOC core sheath	Copolymer (FRNC)	PVC
of the fiber-optic cable sheath	Copolymer (FRNC)	PVC
of the strain relief	Aramid fibers	Kevlar fiber and impregnated glass fiber
Color
of the FOC core sheath	gray	gray
of the fiber-optic cable sheath	light orange	black
Outer diameter	2.9 mm	3.5 mm
Lower dimension	2.8 mm	3.3 mm
Upper dimension	3 mm	3.7 mm
Width of the cable	6.8 mm	9.8 mm
Thickness of the cable	3.9 mm	6.3 mm
Weight per length	30 kg/km	74 kg/km
Momentary lateral force per length	1 000 N/cm	2 000 N/cm
Continuous lateral force per length	200 N/cm	-
Maximum permissible short-time tensile load	800 N	-
Maximum permissible continuous tensile load	-	-
Bending radius when bending over the flat side
with cable laid	50 mm	145 mm
during installation	60 mm	125 mm
Impact strength test
Impact energy	1,5 J	-
Number of impacts	20	-
Hammer wheel diameter	12.5 mm	-
Ambient temperature
during installation	-5 … +50 °C	-5 … +50 °C
during operation	-20 … +60 °C	-20 … +60 °C
during storage	-25 … +70 °C	-25 … +70 °C
during transport	-25 … +70 °C	-25 … +70 °C
Fire behavior	Flame retardant to IEC 60332-3	Flame retardant to IEC 60332-3 (Cat. C)
Chemical resistance
to mineral oil	-	-
to grease	-	-
Radiological resistance to UV radiation	-	Yes
Product property
halogen-free	Yes	-
impact-resistant	Yes	-
Silicone-free	Yes	Yes

Order No.	6XV1 820-6AH10
Product type descrtption	Flexible Fiber Optic Trailing cable
Suitability for use	Flexible cable for routing in cable carriers indoors and outdoors
Type of assembled fiber-optic cable	Sold by the meter, pre-assembled with 4 BFOC connectors
Designation of fiber-optic cable	AT-W11Y (ZN) 11Y 2G62.5/125 3.1B200 + 0.8F600 F
Electrical data
Attenuation measurement per length
at 850 nm	3.1 dB/km
at 1300 nm	0.8 dB/km
Bandwidth length product
at 850 nm	200 Mhz*km
at 1300 nm	600 Mhz*km
Mechanical data
Number of fibers per fiber-optic cable	2
Number of fibers per fiber-optic cable	1
Number of fibers per fiber-optic cable	2
Number of conductors in fiber-optic cable	2
Design of optical fibers	Multi-mode gradient fiber 62.5/125 mm
Design of optical fiber core	Hollow core, filled
Type of fiber-optic cable	Segmentable outer conductor
Material
of the FOC core sheath	PUR
of the fiber-optic cable sheath	PUR
of the strain relief	Aramid fibers, also GFK central element
Color
of the FOC core sheath	black
of the fiber-optic cable sheath	black
Outer diameter of the FOC core sheath	3.5 mm
Lower dimension	3.3 mm
Upper dimension	3.7 mm
Outer diameter of the cable	12.9 mm

Benefits

Area of application

Design

Technical Specifications