| 详细说明 |
|
|
| 品牌：斯派莎克阀门 | 产地：英国斯派莎克 | | 价格：12000人民币/件 | 规格：APT14自动疏水阀泵 | 简要说明： 斯派莎克阀门牌的斯派莎克APT14自动疏水阀泵产品：估价：12000，规格：APT14自动疏水阀泵，产品系列编号：斯派莎克疏水阀泵 | |  | | | 详细介绍：
斯派莎克APT14疏水阀泵
简介：
斯派莎克 APT14,APT14HC 和 APT14SHC 自动疏水阀泵 的压等级为PN16,有法兰和螺纹两种连接方式可供选择。 该装置能够根据管线内的压力情况,自动实现疏水阀循环 和泵循环之间的转换。使用蒸汽作为动力,可在任何工作 条件下(包括真空条件下)从过程设备中排除冷凝水。
斯派莎克APT10自动疏水阀泵设计压力PN10，螺纹连接。根据管路不同状况，可自动疏水和泵水。该装置采用蒸汽为动力，可在所有工况下从加热设备和工艺制程中排除冷凝水，甚至是真空状态。标准APT10-4.5表面绿或蓝色，如有需要，也可ENP镀镍处理。
产品说明
APT14 和 APT14HC
斯派莎克 APT14 自动疏水阀泵,最大蒸汽工作压力为 13.8 bar g,无需任何电力。泵体材料为球墨铸铁(EN JS 1025 或 ASTM A395)。自动疏水阀泵 APT14 和 APT14HC 入口配有摆动式止回阀,APT14 出口配有球形止回阀。 内置的疏水阀机构包括两个不锈钢浮球和一个两级疏水阀;内置的泵机构为一个不锈钢弹簧快速动作机构,无外部密封和填料。
APT14SHC
斯派莎克 APT14SHC 自动疏水阀泵,最大蒸汽工作压力为 13.8 bar g,无需任何电力。泵体材料为碳钢(EN 1.0619 或 ASTM A216 WCB)。入口配有摆动式止回阀,内置的疏水阀机构包括两个不锈钢浮球和一个两级疏水阀;内置的泵机构 为一个不锈钢弹簧快速动作机构,无外部密封和填料。
订购说明:
举例:1- 斯派莎克自动疏水阀泵 APT14,DN40×DN25,法兰连接 EN1092 PN16,带螺纹连接 BSP 动力蒸汽接口。 备件
可供备件在下图以实线标出,虚线所示不作为备件提供。
Compact design which contains all the equipment needed to drain or remove condensate for all load conditions.
Innovative patent applied for low profile mechanism.
• Mechanisms operate with as little as 200 mm installation head from the base of the pump.
• APT10, APT14 and APT14HC - SG iron DIN EN JS 1025 (EN GJS 400-18LT) and
ASTM A395 body and cover 3.1 certifiable.
APT14SHC - Carbon steel EN 1.0619+N and ASTM A216 WCB body and cover 3.1 certifiable.
The APT range is designed in accordance with DIN and ASME standards.
Optional - The body and cover are available with an electroless nickel plate (ENP) finish. (Not APT14SHC)
• All stainless steel internals, with low profile robust stainless steel floats.
• High integrity trapped cover gasket.
• High capacity two stage trap module plus precision ball outlet check valve. The HC and SHC versions have a separate outlet disc check valve.
• Low resistance swing type inlet check valve.
• Positive snap action pump mechanism with replaceable valves and seats.
• Available connections: APT10-4.5 and APT14 (not HC and SHC) screwed BSP / NPT connections, with 1⁄2" screwed BSP or NPT motive fluid connections. The APT14, APT14HC and APT14SHC flanged PN16, ANSI 150, JIS / KS 10, with 1⁄2" screwed BSP or NPT motive fluid connections.
exchanger drainage
APT - Automatic pump trap
For over 50 years, Spirax Sarco has been involved with the design and manufacture of products for efficient condensate management. We have now developed a range of compact, condensate drainage systems in simple-to-install products.
The APT has been designed to remove condensate from steam heat exchangers and process plant under all operating conditions, and forms an integral part of the condensate removal process. It is available in two easy-to-specify options: APT10-4.5 - for loads up to 1 500 kg / h; and
APT14 or APT14HC and APT14SHC - for loads up to 9000 kg/h.
Compactness is the key
The APT's are unique, from their compact size to their approved patent applied mechanisms. No other pressure operated pumps or traps in the world can offer all of the benefits shown on these pages.
|
|
|
|
|
|
|
|
放大图片
暂无相关下载
