| 详细介绍： schneider AH23U02A Two Position, 220/230V, HCO, N.O., General Temp, 18" Leads, End Switch
schneider AH24A000 Two Position, 24V, HCO, N.O., High Temp
schneider AH24A020 Two Position, 24V, HCO, N.O., High Temp, 18" Leads
schneider AH24A02A Two Position, 24V, HCO, N.O., High Temp, 18" Leads, End Switch
schneider AH24B000 Two Position, 120V, HCO, N.O., High Temp
schneider AH24B020 Two Position, 120V, HCO, N.O., High Temp, 18" Leads
上海方丰实业有限公司长期优势供应机械工控配件，五金安防。产品有：
传感器，执行器，变压器，消防锁，电磁阀，变频器，PLC模块，电源模块，开关，检测仪等
经销全国各地。
上海方丰实业有限公司
安 雅
手机：17302112570
座机：021-57772570-803
QQ：1742225849
邮箱：1742225849@qq.com
图片与您所需要的型号不一一对应，请来电咨询确认，谢谢
schneider AH24B02A Two Position, 120V, HCO, N.O., High Temp, 18"Leads, End Switch
schneider AH24D020 Two Position, 208V, HCO, N.O., High Temp, 18" Leads
schneider AH24D02A Two Position, 208V, HCO, N.O., High Temp, 18" Leads, End Switch
schneider AH24T020 Two Position, 277V, HCO, N.O., High Temp, 18" Leads
schneider AH24U020 Two Position, 220/230V, HCO, N.O., High Temp, 18" Leads
schneider AH24U02A Two Position, 220/230V, HCO, N.O., High Temp, 18" Leads, End Switch
schneider AK-42309-500 Positive Positioning Relay with Mounting Linkage, Direct Acting, factory set span at 5 psig (8/Case)
schneider AKR-40605 Relay w/Functions of: 1:1 Direct Acting, Minimum or Maximum output limiting (adjustable 0 to 20 psig), Manual Position Switch, Lowest Pressure Selector
schneider AKS-1100 Remote Setpoint Adjuster, for use with RKS-2001, -4002 and RKSR-4000, allows the setpoint of a pneumatic receiver-controller to be raised or lowered from a location up to 1000' from the receiver controller
schneider AL-150 Solenoid Air Valve, 24V, 1.15 scfm, 1/8" NPT connection, 50 to 95% R.H., brass, mounting bracket included
schneider AL-151 Solenoid Air Valve, 120V, 1.15 scfm, 1/8" NPT connection, 50 to 95% R.H., brass, mounting bracket included
schneider AL-161-4 Air Switching Valve
schneider AL-170 Solenoid Air Valve, 24 Vac, .3 scfm, plastic, open frame, 18" electrical leads included
schneider AL-171 Solenoid Air Valve, 120 Vac, .3 scfm, plastic, open frame, 18" electrical leads included
schneider AL-180 Solenoid Air Valve, 24 Vac, .3 scfm, plastic, j-box, 18" electrical leads included
schneider AL-181 Solenoid Air Valve, 120 Vac, .3 scfm, plastic, j-box, 18" electrical leads included
schneider AL-183 Solenoid Air Valve, 240 Vac, .3 scfm, Plastic, J-Box, 18" Electrical Leads Included
schneider AL-190 Solenoid Air Valve, 24 Vac, .59 scfm, plastic, mounting bracket and fittings for 1/4" O.D. plastic tubing included
schneider AL-191 Solenoid Air Valve, 120 Vac, .59 scfm, plastic, mounting bracket and fittings for 1/4" O.D. plastic tubing included
schneider AM-111 5/16"D Crank Arm for damper or splined actuator shafts, zinc plated
schneider AM-112 3/8"D Crank Arm for damper or splined actuator shafts, zinc plated
schneider AM-113 1/2"D Crank Arm for damper or splined actuator shafts, zinc plated
schneider AM-115 7/16"D Crank Arm for damper or splined actuator shafts, zinc plated
schneider AM-116 1/2"D Crank Arm, splined, zinc plated
schneider AM-122 Straight Linkage Connector, used for linking parallel shafts, 5/16"D, cadmium plated
schneider AM-123 Angle Damper Clip, for attaching connector to damper blade, zinc plated, use AM-122 or AM-132 connectors in 3/8" slot
schneider AM-125 Damper Rod 5/16"D x 20" , zinc plated, 173lbs maximum load
schneider AM-125-48 Damper Rod 5/16"D x 48", zinc plated, 30lbs maximum load
schneider AM-132 Ball Joint Linkage Connector, for nonparallel shafts, 5/16"D hole, cadmium plated
schneider AM-154 For Electric Actuators
schneider AM-230 Motor Crank Arm Kit, for connecting MM, MMR-400/500 Series modular actuators to dampers, includes (1) AM-230 motor crank arm assembly, (1) shaft retainer clip
schneider AM-301 90 Degree Angle Mounting Bracket, for use with oil-submerged gear train damper actuators
schneider AM-321 Two Step Auxiliary SPDT Switch Kit, for use with MC and MP oil-submerged gear train actuators or AM-348 mounting bracket
schneider AM-332 Potentiometer Kit, 100 Ohm, 3 watts, for use in position indicating applications or in paralleling actuators, for use with MP oil-submerged gear train actuator or AM-348 mounting bracket
schneider AM-341 Four Step Auxiliary SPDT Switch Kit, for use with MP oil-submerged gear train actuator or AM-348 mounting bracket
schneider AM-342 Potentiometer with auxiliary two-step switches, combines functions of AM-321 and AM-332, for use with MC and MP oil-submerged gear train actuators or AM-348 mounting bracket
schneider AM-348 Mounting Bracket Kit, for use with auxiliary switches AM-321 and AM-341 or potentiometer kits AM-332 and AM-342
schneider AM-363 Gasket Cover Kit for MC, MP-3xx, -4xx, -2xxx, and -4xxx Series actuators, includes (1) top cover plate, (1) back cover plate, (5) screws
schneider AM-369 NEMA 4 rated Gasket Cover Kit, for MC and MP-9000 Series actuators, includes (1) top cover plate, (1) back cover plate, (4) #6-32 top cover plate screws, (5) #8-32 back cover plate screws
schneider AM-392 3/4" Crank Arm, 1/2" slot provides for adjustable radius from 1" to 5", zinc plated, for MP-9000 Series actuators
schneider AM-394 Connecting Link, two 1/2"D threaded rods with turnbuckle, two 1/2"D ball joint connectors, for MP-9000
schneider AM-530 Crank Arm, w/hole for 1/2"D shaft, holes for 3-1/2" an 4-1/2" stroke, for use with MK-31xx, MK-71xx actuators
schneider AM-532 Bolt-on Frame Mounting Kit, for use with MK-71xx actuators and pivot mounted MK-38xx
schneider AM-533 Shaft Extension, shaft and lock nut 4-3/4"L x 5/8", for use with MK-3xxx and MK-71xx actuators
schneider AM-534 Pivot Stud Kit, with bolts and washers, for use with MK-3xxx and MK-71xx actuators
schneider AM-535 Clevis Kit, 24 UNC threaded hole for actuator shaft, for use with MK-33xx, MK-38xx and MK-71xx actuators
schneider AM-536 Mounting Kit, standard with MK-71xx and MK-38xx, order separate to obtain pivot mounting of MK-31xx
schneider AM-538 Brace Kit, threaded rod and connectors, for use with MK-71xx actuators
schneider AM-542 Rod End Connector, with hole for 5/16"D rods, for use with MK-71x1
schneider AM-543 Shaft Extension, shaft and lock nut 4-3/4"L x 5/8", for use with MK-71x1 actuators
schneider AM-545 Rod End Connector, with hole for 5/16"D rods, for use with MK-3xxx
schneider AM-601 Linkage Conversion Kit, converts actuator for damper applications with 2" stroke, includes mounting bracket, damper linkage with spring, AM-122 straight connector, spring loader fixture
schneider AM-602 Spacer, Adapts MA and MP-5200-0-0-2 Actuators to Old Linkages
schneider AM-603 Adapts Old MA and MP-5200 Actuators to New Linkages
schneider AM-610 Multi-Tap Transformer for use w/ MF-5xxx 120, 208, 240 : 24V, 40VA, 50/60 Hz
schneider AM-620 MX41-715x, MX40-717x, and Mx41-634x TAC DuraDrive Single/Dual Actuator Remote Mounting Kit
schneider AM-621 MX41-715x, MX40-717x, and Mx41-634x TAC DuraDrive Actuators Over the Shaft Extender and Single/Dual Actuator Mounting Kit
schneider AM-622 ACTUATOR STANDOFF KIT
schneider AM-623 DURADRIVE GANG MOUTING COUPLER
schneider AM-671 Universal Mounting "L" Bracket, w/side flange, 12 gauge galvanized steel, 11"W x 17"H x 6-1/4"D, for use with Mx4x-704x, Mx4x-707x and Mx4x-715x
schneider AM-672 Universal Mounting "L" Bracket, 12 gauge galvanized steel, 10-1/4""W x 13"H x 6-1/8"D, for use with Mx4x-704x, Mx4x-707x and Mx4x-715x
schneider AM-673 Multiple Actuator Mounting Bracket, 12 gauge galvanized steel, 7""W x 3-3/8"H x 5-3/4"D, for use with Mx4x-704x, Mx4x-715x
schneider AM-674 Weather Shield, 9-1/2"W x 14-3/8"L x 6"D, Mx40-704x, -707x, -715x, -717x, MF40-6043, -6083, -6153, -6343, MS40-6043, -6083, -6153, -634x, MS50-E2x01, MS50-H2x01
schneider AM-675 Base Mounting Plate for AM-674, 9-5/16"W x 14-5/16"H
schneider AM-676 Universal Shaft Extension, approx 9-1/2"L, Mx40-704x (AM-710 required), -707x, -715x, -717x, MF40-6043, -6083, -6153, -6343, MS40-6043, -6083, -6153, -634x, MS50-E2x01, MS50-H2x01
schneider AM-686 Damper Position Indicator for Mx40-707x, Mx40-715x
schneider AM-687 Replacement Universal Clamp for up to 1.05"D shafts, Mounts on Mx40-707x, Mx40-715x,
schneider AM-688 Replacement Universal Clamp for up to 3/4"D shafts, Mounts on Mx40-707x, Mx40-715x,
schneider AM-689 Angle of Rotation Limiter, use where damper does not have a proper end-stop, for Mx40-707x, Mx40-715x
schneider AM-690 Universal Crank Arm Kit, for non-direct mounting applications for round shafts, 3/4" maximum damper shaft size, for Mx40-707x, Mx40-715x
schneider AM-691 Crank Arm Kit, for non-direct mounting applications for jack shafts, 1.05" maximum damper shaft size, for Mx40-707x, Mx40-715x
schneider AM-692 V-bolt Kit, includes (2) washers, (2) nuts, (2) V-bolts, use with AM-690 and AM-691, for Mx40-707x, Mx40-7151x
schneider AM-693 Damper Linkage Kit, used when a direct coupling is not possible, includes rank arm with wire clip, (2) "C" mounting brackets, (4) self-tapping metal screws, (2) ball joints, (4) flat washers, for Mx40-707x, Mx40-715x
schneider AM-703 Input Scaling Model, 24 Vac/Vdc +/-15% supply voltage, 5 to 95% R.H., snap-track mounting included, for MS40-7043, -7073, -7153, -717x, -6083, -6153, -6343
schneider AM-704 Modulation Interface, converts signal input from pulse-width signal to an analog 2 to 10 Vdc signal, snap-track mounting included, for MS40-7043, -7073, -7153, -717x, -6083, -6153, -6343
schneider AM-705 Surface Mount Positioner, NEMA 4 Housing, 24 Vac/Vdc +/- 20%, 50/60 Hz, for MS40-7043, -7073, -7153, -717x, -6083, -6153, -6343
schneider AM-706 Flush Panel Mount, Min and/or Manual Positioner, 24 Vac/Vdc +/- 20%, 50/60 Hz, for MS40-7043, -7073, -7153, -717x, -6083, -6153, -6343
schneider AM-708 500 Ohm Resistor, converts 4-20 mA signal to 2 to 10 Vdc signal, for MS40-7043, 7073, 7153, 717x, 6083, 6153, -6343
schneider AM-709 Damper Shaft Position Indicator, 3/4"D round shaft, 1/2" square shaft, for Mx40-704x
schneider AM-710 Universal Clamp for up to 3/4" D round shafts, 3/8" to 5/8" hex shafts, or 1/2" square shafts, for Mx40-704x
schneider AM-711 Crank Arm Kit for up to 1/2" round shafts, for Mx40-704x
|
放大图片
暂无相关下载
