| General specifications |
| Switching element function |
NAMUR, NC |
| Rated operating distance |
40 mm |
| Installation |
non-flush |
| Output polarity |
DC |
| Assured operating distance |
0 ... 32.4 mm |
| Reduction factor rAl |
0.31 |
| Reduction factor rCu |
0.3 |
| Reduction factor r304 |
0.74 |
| Nominal ratings |
| Nominal voltage |
8.2 V (Ri approx. 1 kΩ) |
| Switching frequency |
0 ... 150 Hz |
| Hysteresis |
typ. 5 % |
| Reverse polarity protection |
reverse polarity protected |
| Short-circuit protection |
yes |
| Current consumption |
|
|
Measuring plate not detected |
≥ 2.2 mA |
|
Measuring plate detected |
≤ 1 mA |
| Switching state indication |
LED, yellow |
| Functional safety related parameters |
| MTTFd |
1670 a |
| Mission Time (TM) |
20 a |
| Diagnostic Coverage (DC) |
0 % |
| Approvals and certificates |
| UL approval |
cULus Listed, General Purpose |
| CSA approval |
cCSAus Listed, General Purpose |
| CCC approval |
CCC approval / marking not required for products rated ≤36 V |
| Ambient conditions |
| Ambient temperature |
-25 ... 100 °C (-13 ... 212 °F) |
| Storage temperature |
-40 ... 100 °C (-40 ... 212 °F) |
| Mechanical specifications |
| Connection type |
Connector M12 x 1 , 4-pin |
| Housing material |
PA |
| Sensing face |
PA |
| Housing diameter |
|
| Protection degree |
IP69K |
| General information |
| Use in the hazardous area |
see instruction manuals |
|
Category |
1G; 2G; 3G; 3D |
放大图片
暂无相关下载
