| General specifications |
| Signal type |
Digital Output |
| Supply |
| Connection |
Power Rail or terminals 14+, 15- |
| Rated voltage |
20 ... 30 V DC |
| Power consumption |
max. 3.3 W at 45 mA output current |
| Input |
| Connection |
terminals 7, 8, 9 |
| Input current |
approx. 3 mA at 24 V DC |
| Signal level |
1-signal: 16 ... 30 V DC
0-signal: 0 ... 5 V DC |
| Output |
| Connection |
channel 1: terminals 1+, 2-, 3
channel 2: terminals 4+, 5-, 6- |
| Internal resistor |
272 Ω |
| Current |
≤ 45 mA |
| Voltage |
≥ 11.7 V |
| Open loop voltage |
min. 24 V |
| Output signal |
These values are valid for the rated operating voltages from 20 ... 30 V DC. |
| Energized/De-energized delay |
≤ 20 ms / ≤ 20 ms |
| Line fault detection |
signal at short-circuit RB < 50 Ω, lead breakage RB > 10 kΩ , test current < 650 µA |
| Directive conformity |
| Electromagnetic compatibility |
|
|
Directive 2004/108/EC |
EN 61326-1:2006 |
| Conformity |
| Electromagnetic compatibility |
NE 21 |
| Protection degree |
IEC 60529:2001 |
| Ambient conditions |
| Ambient temperature |
-20 ... 50 °C (-4 ... 122 °F) |
| Mechanical specifications |
| Protection degree |
IP20 |
| Mass |
approx. 150 g |
| Dimensions |
20 x 119 x 115 mm (0.8 x 4.7 x 4.5 in) , housing type B2 |
| Data for application in connection with Ex-areas |
| EC-Type Examination Certificate |
ZELM 00 ATEX 0024 , for additional certificates see www.pepperl-fuchs.com |
|
Group, category, type of protection |
 II (1)GD [Ex ia] IIC; [Ex iaD] [circuit(s) in zone 0/1/2/20/21/22] |
| Statement of conformity |
TÜV 02 ATEX 1820 X |
|
Group, category, type of protection, temperature class |
II 3G Ex nA II T4 |
| Directive conformity |
|
|
Directive 94/9/EC |
EN 60079-0:2009, EN 60079-11:2007 , EN 60079-15:2010 |
| International approvals |
| FM approval |
|
|
Control drawing |
16-548FM-12 |
| IECEx approval |
IECEx TUN 04.0001 |
|
Approved for |
[Ex ia] IIC , [Ex iaD] |
放大图片
暂无相关下载
