| General specifications |
| Detection type |
photoelectric sampling |
| Pulse count |
max. 5000 |
| Functional safety related parameters |
| MTTFd |
140 a |
| Mission Time (TM) |
20 a |
| L10h |
70 E+9 at 6000 rpm |
| Diagnostic Coverage (DC) |
0 % |
| Electrical specifications |
| Operating voltage |
10 ... 30 V DC |
| No-load supply current |
max. 60 mA |
| Output |
| Output type |
push-pull, incremental |
| Voltage drop |
< 3 V |
| Load current |
max. per channel 40 mA , short-circuit protected, reverse polarity protected |
| Output frequency |
max. 200 kHz |
| Rise time |
400 ns |
| Connection |
| Cable |
∅7.8 mm, 6 x 2 x 0.14 mm2, 1 m |
| Standard conformity |
| Protection degree |
DIN EN 60529, IP54 |
| Climatic testing |
DIN EN 60068-2-78 , no moisture condensation |
| Emitted interference |
EN 61000-6-4:2007 |
| Noise immunity |
EN 61000-6-2:2005 |
| Shock resistance |
DIN EN 60068-2-27, 100 g, 3 ms |
| Vibration resistance |
DIN EN 60068-2-6, 10 g, 10 ... 2000 Hz |
| Approvals and certificates |
| UL approval |
cULus Listed, General Purpose, Class 2 Power Source |
| Ambient conditions |
| Operating temperature |
|
|
Glass disk |
-5 ... 80 °C (23 ... 176 °F) , movable cable
-20 ... 80 °C (-4 ... 176 °F), fixed cable |
|
Plastic disk |
-5 ... 60 °C (23 ... 140 °F) , movable cable
-20 ... 60 °C (-4 ... 140 °F), fixed cable |
| Storage temperature |
|
|
Glass disk |
-40 ... 85 °C (-40 ... 185 °F) |
|
Plastic disk |
-40 ... 70 °C (-40 ... 158 °F) |
| Mechanical specifications |
| Material |
|
|
Housing |
powder coated aluminum |
|
Flange |
3.1645 aluminum |
|
Shaft |
Stainless steel 1.4305 / AISI 303 |
| Mass |
approx. 290 g |
| Rotational speed |
max. 6000 min -1 |
| Moment of inertia |
≤ 40 gcm2 |
| Starting torque |
≤ 1.5 Ncm |
| Shaft load |
|
|
Angle offset |
1 ° |
|
Axial offset |
max. 1 mm |
放大图片
暂无相关下载
