| 产品阐述 |
| Single head system |
| General specifications |
| Sensing range |
30 ... 500 mm |
| Adjustment range |
50 ... 500 mm |
| Unusable area |
0 ... 30 mm |
| Standard target plate |
100 mm x 100 mm |
| Transducer frequency |
approx. 380 kHz |
| Response delay |
approx. 50 ms |
| Indicators/operating means |
| LED yellow |
solid yellow: object in the evaluation range
yellow, flashing: program function, object detected |
| LED red |
solid red: Error
red, flashing: program function, object not detected |
| Electrical specifications |
| Operating voltage |
10 ... 30 V DC , ripple 10 %SS |
| No-load supply current |
≤ 45 mA |
| Input/Output |
| Synchronization |
1 synchronous connection, bi-directional
0-level: -UB...+1 V
1-level: +4 V...+UB
input impedance: > 12 kΩ
synchronization pulse: ≥ 100 µs, synchronization interpulse period: ≥ 2 ms |
| Synchronization frequency |
|
|
Common mode operation |
max. 95 Hz |
|
Multiplex operation |
≤ 95 Hz /n, n = number of sensors |
| Input |
| Input type |
1 program input
lower evaluation limit A1: -UB ... +1 V, upper evaluation limit A2: +4 V ... +UB
input impedance: > 4.7 kΩ, pulse duration: ≥ 1 s |
| Output |
| Output type |
1 analog output 4 ... 20 mA |
| Resolution |
0.13 mm for max. detection range |
| Deviation of the characteristic curve |
± 1 % of full-scale value |
| Repeat accuracy |
± 0.1 % of full-scale value |
| Load impedance |
0 ... 300 Ohm |
| Temperature influence |
± 1.5 % of full-scale value |
| Approvals and certificates |
| UL approval |
cULus Listed, General Purpose |
| CSA approval |
cCSAus Listed, General Purpose |
| Ambient conditions |
| Ambient temperature |
-25 ... 70 °C (-13 ... 158 °F) |
| Storage temperature |
-40 ... 85 °C (-40 ... 185 °F) |
| Mechanical specifications |
| Connection type |
Connector M12 x 1 , 5-pin |
| Protection degree |
IP65 |
| Material |
|
|
Housing |
brass, nickel-plated |
|
Transducer |
epoxy resin/hollow glass sphere mixture; foam polyurethane, cover PBT |
| Mass |
60 g |
放大图片
暂无相关下载
