| 详细介绍：
+ Compact Capsule Design
+ Low Torque Design
+ Suitable for Analog or Digital Signals
+ High Quality Gold on Gold Contacts
+ Low Electrical Noise
+ Precision Ball Bearings
+ Data Speeds up to 50 Megabits / Sec*
+ Compatible With a Range of Data Bus Protocols
The ES Series electrical slip ring is a rotating
assembly used to transfer power, control
circuits or data (analog / digital) from
stationary inlets to rotating outlets. 442-1327836 LOCTITE
NDBK HI/IM WC 25LB M/L
156-500508-047/CAT NO MTI-3150E4TPXX 美国chromalox
A8245-9215KME A4904-9215KME VEXTA
S42024-L5583-A1 4 X GE/T TNX:A4B0000011267
S42024-L5495-A1 8 X FE/L2 TNX:A4B0000008828
S42024-L5585-A1-5 CC + STM 16|4|1 (Switch fabric Prot
33G/10G, STM 16/4/1) TNX:A4B00000011266
S42024-L5561-A1-6 SCE PLUS TNX:A4B0000011265
TNX: A4B0000011264 Siemens SDH Core HIT 7035 ADM-16/-4/-
1config. w/o Prot., >=R4.4
S42024-L5294-A1-9 System controller card for NSN SDH HIT
7060 HC Node
施耐德 ISH100/30058/0/0/00/0/00/01/00
GE 5GE752RB3B
意大利ABAC空压机 型号B7000
品牌SC气动泵 10-600w020L 35:1
飞机耳机 H-143/AIC
GE/752/FF/HT/SH/B/1S
Versatile and compact, the ES Series
electrical slip rings feature a low torque
design with gold-on-gold contacts and offer
low electrical noise. The ES Series also
includes fl exible, color-coded lead wires
suitable for transferring analog and digital
signals. Standard models are available in 6,
6, 12, 12, 18, 24, 36, and 56 circuits.
Max. Operating Speed 250 RPM Continuous**
Standard Circuit Options 6, 12, 18, 24, 36, 56
Voltage 240***
Amps / Circuit 2
Lead / Size Type 28 gauge silver plated copper, Tefl on?
Contact Material Gold
Temperature Range -40°F to 176°F (-40°C to +80°C)
* For higher data speeds see our ESE & ESET Series slip rings
** The max operating speed for models ES6A & ES12A is 100 RPM
*** Voltage for ES6A & ES12A is 120
ES SERIES
Slip Ring Solutions
Series Overview
Specifications
main 763.786.3758 | toll free 866.700.3784 | 13829 Jay Street NW,
Andover, MN, USA 55304 | www.dsti.com
ES SERIES
Slip Ring Solutions
Dimensions
ES6A ES6 ES12A ES12
A .129″ [3.28mm] .215″ [5.50mm] .129″ [3.28mm] .215″ [5.50mm]
B .725″ [18.42mm] 1.375″ [34.93mm] .725″ [18.42mm] 1.375″
[34.93mm]
C .95" [24.13mm] 1.75" [44.45mm] .95" [24.13mm] 1.75" [44.45mm]
D .47″[11.94mm] .57″[14.48mm] .47″[11.94mm] .57″[14.48mm]
E .20″ [5.08mm] .20″ [5.08mm] .20″ [5.08mm] .20″ [5.08mm]
F .50″ [12.70mm] .87″ [22.10mm] .50″ [12.70mm] .87″ [22.10mm]
G .19″ [4.83mm] .31″ [7.87mm] .19″ [4.83mm] .31″ [7.87mm]
H .04″ [1.02mm] .09″ [2.36mm] .04″ [1.02mm] .09″ [2.36mm]
I .34″ [8.64mm] .48″ [12.19mm] .59″ [14.99mm] .75″ [19.05mm]
J 6 Circuits 6 Circuits 12 Circuits 12 Circuits
K 2 Amps 2 Amps 2 Amps 2 Amps
ES18 ES24 ES36 ES56
A .215″ [5.50mm] .215″ [5.50mm] .220″ [5.60mm] .220″ [5.60mm]
B 1.375″ [34.93mm] 1.375″ [34.93mm] 1.410″ [35.81mm] 1.410″
[35.81mm]
C 1.75" [44.45mm] 1.75" [44.45mm] 1.75" [44.45mm] 1.75" [44.45mm]
D .57″[14.48mm] .57″[14.48mm] .48″ [12.19mm] .48″ [12.19mm]
E .20″ [5.08mm] .20″ [5.08mm] .11″ [2.80mm] .11″ [2.80mm]
F .87″ [22.10mm] .87″ [22.10mm] 1.00″ [25.40mm] 1.00″
[25.40mm]
G .31″ [7.87mm] .31″ [7.87mm] .38″ [9.53mm] .38″ [9.53mm]
H .09″ [2.36mm] .09″ [2.36mm] .06″ [1.50mm] .06″ [1.50mm]
I 1.02″ [25.91mm] 1.29″ [32.77mm] 2.06″ [75.30mm] 2.96″
[75.30mm]
J 18 Circuits 24 Circuits 36 Circuits 56 Circuits
K 2 Amps 2 Amps 2 Amps 2 Amps
? A thru
? B b.c.
? G 442-1327836 LOCTITE NDBK HI/IM WC 25LB M/L
156-500508-047/CAT NO MTI-3150E4TPXX 美国chromalox
A8245-9215KME A4904-9215KME VEXTA
S42024-L5583-A1 4 X GE/T TNX:A4B0000011267
S42024-L5495-A1 8 X FE/L2 TNX:A4B0000008828
S42024-L5585-A1-5 CC + STM 16|4|1 (Switch fabric Prot
33G/10G, STM 16/4/1) TNX:A4B00000011266
S42024-L5561-A1-6 SCE PLUS TNX:A4B0000011265
TNX: A4B0000011264 Siemens SDH Core HIT 7035 ADM-16/-4/-
1config. w/o Prot., >=R4.4
S42024-L5294-A1-9 System controller card for NSN SDH HIT
7060 HC Node
施耐德 ISH100/30058/0/0/00/0/00/01/00
GE 5GE752RB3B
意大利ABAC空压机 型号B7000
品牌SC气动泵 10-600w020L 35:1
飞机耳机 H-143/AIC
GE/752/FF/HT/SH/B/1S
H
D
E
? F
I
? F
48"
[1219 mm]
J number of circuits
K continuous amps
48"
[1219 mm]
? C
main 763.786.3758 | toll free 866.700.3784 | 13829 Jay Street NW,
Andover, MN, USA 55304 | www.dsti.com
ES SERIES
Slip Ring Solutions
main 763.786.3758 | toll free 866.700.3784 | 13829 Jay Street NW,
Andover, MN, USA 55304 | www.dsti.com
ES6A
Tag # Color Descrtption/Awg
1 BLK
2A/26
2 BRN
3 RED
4 ORN
5 YEL
6 GRN
Wire Color Codes
ES12A
Tag # Color Descrtption/Awg
1 BLK
2A/26
2 BRN
3 RED
4 ORN
5 YEL
6 GRN 442-1327836 LOCTITE NDBK HI/IM WC 25LB M/L
156-500508-047/CAT NO MTI-3150E4TPXX 美国chromalox
A8245-9215KME A4904-9215KME VEXTA
S42024-L5583-A1 4 X GE/T TNX:A4B0000011267
S42024-L5495-A1 8 X FE/L2 TNX:A4B0000008828
S42024-L5585-A1-5 CC + STM 16|4|1 (Switch fabric Prot
33G/10G, STM 16/4/1) TNX:A4B00000011266
S42024-L5561-A1-6 SCE PLUS TNX:A4B0000011265
TNX: A4B0000011264 Siemens SDH Core HIT 7035 ADM-16/-4/-
1config. w/o Prot., >=R4.4
S42024-L5294-A1-9 System controller card for NSN SDH HIT
7060 HC Node
施耐德 ISH100/30058/0/0/00/0/00/01/00
GE 5GE752RB3B
意大利ABAC空压机 型号B7000
品牌SC气动泵 10-600w020L 35:1
飞机耳机 H-143/AIC
GE/752/FF/HT/SH/B/1S
7 BLU
8 VIO
9 GRY
10 WHT
11 WHT-BLK
12 WHT-BRN
ES6
Tag # Color Descrtption/Awg
1 BLK
2A/28
2 BRN
3 RED
4 ORN
5 YEL
6 GRN
ES12
Tag # Color Descrtption/Awg
1 BLK
2A/28
2 BRN
3 RED
4 ORN
5 YEL
6 GRN
7 BLU
8 VIO
9 GRY
10 WHT
11 WHT-BLK
12 WHT-BRN
ES18
Tag # Color Descrtption/Awg
1 BLK
2A/28
2 BRN
3 RED
4 ORN
5 YEL
6 GRN
7 BLU
8 VIO
9 GRY
10 WHT
11 WHT-BLK
12 WHT-BRN
13 WHT-RED
14 WHT-ORN
15 WHT-YEL
16 WHT-GRN
17 WHT-BLU
18 WHT-VIO
ES SERIES
Slip Ring Solutions
main 763.786.3758 | toll free 866.700.3784 | 13829 Jay Street NW,
Andover, MN, USA 55304 | www.dsti.com
Wire Color Codes
ES56
Tag # Color Descrtption/Awg
1 BLK
2A/26
2 BRN
3 RED
4 ORN
5 YEL
6 GRN
7 BLU
8 VIO
9 GRY
10 WHT
11 WHT-BLK
12 WHT-BRN
13 WHT-RED
14 WHT-ORN
15 WHT-YEL
16 WHT-GRN
17 WHT-BLU
18 WHT-VIO
19 BLK
20 BRN
21 RED
22 ORN
23 YEL
24 GRN
25 BLU
26 VIO
27 GRY
28 WHT
29 WHT-BLK
30 WHT-BRN
31 WHT-RED
32 WHT-ORN
33 WHT-YEL
34 WHT-GRN
35 WHT-BLU
36 WHT-VIO
37 BLK
2A/26
38 BRN
39 RED
40 ORN
41 YEL
42 GRN
43 BLU
44 VIO
45 GRY
46 WHT
47 WHT-BLK
48 WHT-BRN
49 WHT-RED
50 WHT-ORN
51 WHT-YEL
52 WHT-GRN
53 WHT-BLU
54 WHT-VIO
55 BLK
56 BRN
ES36
Tag # Color Descrtption/Awg
1 BLK
2A/26
2 BRN
3 RED
4 ORN
5 YEL
6 GRN
7 BLU
8 VIO
9 GRY
10 WHT
11 WHT-BLK
12 WHT-BRN
13 WHT-RED
14 WHT-ORN
15 WHT-YEL
16 WHT-GRN
17 WHT-BLU
18 WHT-VIO
19 BLK
20 BRN
21 RED
22 ORN
23 YEL
24 GRN
25 BLU
26 VIO
27 GRY
28 WHT
29 WHT-BLK
30 WHT-BRN
31 WHT-RED
32 WHT-ORN
33 WHT-YEL
34 WHT-GRN
35 WHT-BLU
36 WHT-VIO
ES24
Tag # Color Descrtption/Awg
1 BLK
2A/28
2 BRN
3 RED
4 ORN
5 YEL
6 GRN
7 BLU
8 VIO
9 GRY
10 WHT
11 WHT-BLK
12 WHT-BRN
13 WHT-RED
14 WHT-ORN
15 WHT-YEL
16 WHT-GRN
17 WHT-BLU
18 WHT-VIO
19 WHT-GRY
20 WHT-BLKBRN
21 WHT-BLKRED
22 WHT-BLKORN
23 WHT-BLKYEL
24 WHT-BLKGRN品牌BOWEN ?10537?????5个
?10537-1???5个
?10538?????10个
14923??????10个
14924??????5个
14925??????5个
14927??????20个
15694??????20个
14926??????20个
16589??????5个
7603???????5个
6733????????5个
23368??????5个??
BarcontrolR325P Single Axis Driver
User Manual
And Commands Guide
Version 1.01
Thank you for purchasing the R325P Single-Axis Step & Direction
Driver. This product is warranted to be free of manufacturing
defects for one (1) year from the date of purchase.
PLEASE READ BEFORE USING
Before you start, you must have a suitable step motor, a DC power
supply suitable for the motor and a current resistor. The power
supply voltage must be between 4 times and 20 times the motor's
rated voltage.
DISCLAIMER
The information provided in this document is believed to be
reliable. However, no responsibility is assumed for any possible
inaccuracies or omissions. Specifications are subject to change
without notice.
RMS Technologies reserves the right to make changes without
further notice to any products herein to improve reliability,
function, or design. RMS Technologies does not assume any
liability arising out of the application or use of any product or
circuit described herein; neither does it convey any license
under its patent rights, nor the rights of others.
Special Symbols
Indicates a WARNING and that this information could prevent
injury, loss of property, or even death (in extreme cases).
R325P User Manual Page 2 of 20 5/29/2013 Version 1.01
R325P User Manual
Product: R325P
Version: 1.01
Date: 5/29/2013
Version History
Version
Date
Descrtption of Changes
1.00
01/31/2013
New User Manual
1.01
05/29/2013
Updated enable/disable pin descrtption on page 8.
R325P User Manual Page 3 of 20 5/29/2013 Version 1.01
Table of Contents
1. FEATURES
.................................................................
.......................... 5
2. ELECTRICAL SPECIFICATIONS
.................................................................
..... 5
3. OPERATING SPECIFICATIONS
.................................................................
..... 6
4. MECHANICAL SPECIFICATIONS
.................................................................
... 6
6. CONNECTION SPECIFICATIONS
.................................................................
... 8
Connecting the Power
.................................................................
................................. 9
Connecting the Motor
.................................................................
................................. 9
Configure the R325 using the DIP Switch
.................................................................
.......... 10
DIP Switch Run Current Settings
.................................................................
............................... 10
DIP Switch Hold Current Settings
.................................................................
.............................. 11
DIP Switch Step Resolution Settings
.................................................................
.......................... 11
8. COMMAND TABLES
.................................................................
............. 11
Axis Configuration Commands
.................................................................
...................... 11
General Operation Commands
.................................................................
..................... 11
9. COMMANDS
.................................................................
..................... 13
Protocol Syntax
.................................................................
...................................... 13
10. Troubleshooting
.................................................................
................ 14
11. Appendix A
.................................................................
..................... 15
11. Appendix B
.................................................................
..................... 19
R325P User Manual Page 4 of 20 5/29/2013 Version 1.01
1. FEATURES
? Single Axis Driver for Bipolar step motors
? Operates from +12 to 48 VDC
? Phase currents from 0.3 to 3.0 Amp Peak
NOTE: Phase current of 2.7 Amp and above REQUIRES an additional
heatsink, make sure the temperature of the bracket does not
exceed 45° C.
? Hold current reduction capability with adjustable current and
timeout settings
? Selectable Step Resolution from Full Step to 256x Microstepping
? Has three optically isolated control inputs and one optically
isolated control output
? Pole Damping Technology? integrated within driver board
Dip switches and a RS485 interface are built-in to the R325P
Controller. A USB connection can be used by using the USB485
Converter Card (sold separately).
2. ELECTRICAL SPECIFICATIONS
Supply Voltage: +12 to 48 VDC
Phase Current: 0.3 to 3.0 Amps Peak
NOTE: Phase current of 2.7 Amp and above REQUIRES an additional
heatsink, make sure the temperature of the bracket does not
exceed 45° C.
I/O Specifications
3x Optically Isolated Inputs (1 fixed)
1x Optically Isolated Output
Minimum Motor Impedance: 1.5 mH
Note: The drive may behave unpredictably if the motor you are
using has an inductance less than 1.5 mH. R325P User Manual Page
5 of 20 5/29/2013 Version 1.01
3. OPERATING SPECIFICATIONS
Maximum Step Frequency: 2.5 MHz
Operating Temperature: Low end – 0° C
High end – Dependent on case temperature, bracket temperature
must not exceed 45° C
Automatic Motor Holding Current reduction available from 0.3 to
2.5 Amps
Logic Timing
Minimum Step Pulse Width 200 nanoseconds
Minimum Step Low Time 200 nanoseconds
Maximum Power-Down Recovery Time 20 milliseconds
4. MECHANICAL SPECIFICATIONS
Size: 3.00” x 2.75” x 1.42”
Weight: 3.2 oz
Mounting: Four #6-32 screws, 2.42” x 2.45”
Plate: Aluminum, Hard Anodized
Figure 3.1 R325P User Manual Page 6 of 20 5/29/2013 Version 1.01
5. PIN ASSIGNMENTS
Mating Connectors
P1 Amp 640441-3
P3 Phoenix Contact 1803675
P1 – RS485 bus Interface
P1 Configuration
Pin No
Function
1
A Input (+ve)
2
Ground
3
B Input (-ve)
Table 5.1
P1 Connector – Pin 1 Location
Image 5.1
P3 – Motor/Controls/Power Interface
A 12-pin pluggable terminal strip connector P3 provides power and
the step and direction control functions for the module. All of
these signals are optically isolated. Open-collector drives are
required to provide pulses for Step, levels for Direction, and
Disable. The common +ve supply ranges from 5 VDC to 30 VDC with
respect to the signal input; however if the supply is greater
than 5 VDC then a resistor must be inserted in series with each
signal line to limit the current to 10 mA.
P3 Configuration
Pin No
Function
1
Common +ve External
2
Step (in)
3
Direction (in)
4
+5 VDC Internal
5
Disable (in)
6
Motor A+ (out)
7
Motor A- (out)
8
Motor B+ (out)
9
Motor B- (out)
10
Full Step Output
11
Power Ground
12
Power Positive
Table 5.2
P3 Connector – Pin 1 Location
Image 5.2
R325P User Manual Page 7 of 20 5/29/2013 Version 1.01
CAUTION: Connecting Motor phases (A, A Bar, B, B Bar) to the
incorrect location while the R325P is powered will cause the
board to burn. Be sure to insert motor phases into Pins 6 through
9, in the order of A, A Bar, B, and B Bar. It is recommended that
power is connected last, so that all connections can be checked
before power up.
6. CONNECTION SPECIFICATIONS
When using the Driver Only portion of the R325P, use the dip
switches for step resolution and current settings.
Using the R325P as a Driver Unit Only
If using the R325P as a Driver only, be sure to connect the power
supply last.
Pin 1: Connect Pin 1 to Pin 4 to use the internal +5VDC. By using
the internal +5VDC the I/O’s will no longer be optically
isolated. If optical isolation is still desired, use a separate
+5VDC supply and connect the POSITIVE end of the supply to Pin 1.
The NEGATIVE end will connect with the NEGATIVE end of your pulse
generator.
Pin 2: Use a pulse generator or function generator to receive
pulses into the R325P. Connect the POSTIVE end of the pulse
generator to Pin 2. The NEGATIVE end will be connected to the
NEGATIVE end of the +5VDC supply if using a separate power
source. If using the internal +5VDC supply, connect the NEGATIVE
end of the pulse generator to Power GROUND.
Pin 3: To switch the direction of motor rotation, connect Pin 3
with Pin 11, Power Ground. An open or closed connection to Power
Ground will change the direction.
Pin 4: This is the internal +5VDC. Use this for testing purposes
or if optical isolation of the inputs is not desired. It can
output a max of 50 mAmps.
Pin 5: To enable the drive leave this Pin open, disable the drive
connect Pin 5 with Pin 11 (Power Ground). An open or closed
connection to Power Ground will enable and disable the drive,
respectively. A closed connection will remove all power to the
output motor leads (Pins 6 through 9).
Pin 6: Phase A Motor Connection
Pin 7: Phase A Motor Connection
Pin 8: Phase B Motor Connection
Pin 9: Phase B Motor Connection
CAUTION: Connecting Motor phases (A, A Bar, B, B Bar) to the
incorrect location while the R325P is powered will cause the
board to burn. Be sure to insert motor phases into Pins 6 through
9, in the order of A, A Bar, B, and B Bar. It is recommended that
power is connected last, so that all connections can be checked
before power up.
Pin 10: The Full Step output is not available for the basic
R325P. This feature is used on the R325PE.
Pin 11: Connect the NEGATIVE of the Power Supply to this
terminal.
Pin 12: Connect the POSITIVE of the Power Supply to this
terminal. (+12 to 48VDC) R325P User Manual Page 8 of 20 5/29/2013
Version 1.01
Connecting the Power
The R325P requires a supply voltage between 12-48 VDC. First,
connect the positive end of the power supply to positive terminal
(Pin 12), and then connect the negative of the power supply to
the Ground (Pin 11) on the R325P.
WARNING! Be careful not to reverse the polarity from the power
supply to the driver. Reversing the connection will destroy your
driver and void the warranty.
Connecting the Motor
WARNING! Make sure the power is OFF when connecting or
disconnecting motors from the R325P. Damage will occur if the
power is being supplied.
Please refer to your motor documentation for wiring color code.
Connect the corresponding Phase from the motor to the proper pin
on the R325P.
Motor Phase P1 Connector
Phase A Pin 6
Phase A- Pin 7
Phase B Pin 8
Phase B- Pin 9
Figure 6.1
R325P User Manual Page 9 of 20 5/29/2013 Version 1.01
Using the R325P with more than 5V
You can choose to supply the optos with the R325P’s internal 5V
supply by jumping pins 1 to 4. But if you choose to use more than
5V, for example, a 24V supply and the step pulse train is also a
0 to 24V low-high signal, please use the following recommended
resistor to limit the current to 10 mAmps. Note: no resistor will
be needed on the actual opto supply line, pin 1.
Step & Direction lines have a 470 ohm internal resistor
Voltage:
5V
10V
15V
24V
Ohms needed:
0
500
1000
2000
Wattage rating:
0
? watt
? watt
? watt
Table 6.1
Disable line has a 1k ohm internal resistor
Voltage:
5V
10V
15V
24V
Ohms needed:
0
1000
2000
3800
Wattage rating:
0
1/8 watt
1/8 watt
? watt
Table 6.2
Configure the R325P using the DIP Switch
R325P DIP Switch Settings
Run Current
Function
SW1
SW2
SW3
SW4
0.3A
ON
ON
ON
ON
0.4A
OFF
ON
ON
ON
0.5A
ON
OFF
ON
ON
0.6A
OFF
OFF
ON
ON
0.8A
ON
ON
OFF
ON
1.0A
OFF
ON
OFF
ON
1.2A
ON
OFF
OFF
ON
1.4A
OFF
OFF
OFF
ON
1.6A
ON
ON
ON
OFF
1.8A
OFF
ON
ON
OFF
2.0A
ON
OFF
ON
OFF
2.2A
OFF
OFF
ON
OFF
2.4A
ON
ON
OFF
OFF
2.6A
OFF
ON
OFF
OFF
2.8A
ON
OFF
OFF
OFF
3.0A
OFF
OFF
OFF
OFF
Table 6.3
WARNING: Current of 2.7 Amp and above REQUIRES an additional heat
sink; make sure the temperature of the bracket does not exceed 45
° C R325P User Manual Page 10 of 20 5/29/2013 Version 1.01
Hold Current (Percent of Run Current)
Function
SW5
SW6
0%
ON
ON
33%
OFF
ON
66%
ON
OFF
100%
OFF
OFF
Table 6.4
Step Resolution
Function
SW7
SW8
SW9
SW10
Full Step*
OFF
OFF
OFF
OFF
2X
ON
OFF
OFF
OFF
4X
ON
ON
OFF
OFF
8X
ON
OFF
ON
OFF
16X
ON
ON
ON
OFF
32X
ON
OFF
OFF
ON
64X
ON
ON
OFF
ON
128X
ON
OFF
ON
ON
256X
ON
ON
ON
ON
Table 6.5
*The power must be turned OFF when switching in and out of Full
Step mode.
7. COMMAND TABLES
Axis Configuration Commands
Function
Query/New
Code
value
Minimum
Maximum
Default
Hold Timeout
Q/N
HT
Numeric
100
5000
500
Percent Fast Decay
Q/N
PF
Numeric
0
3
2
Table 7.1
General Operation Commands
Function
Query/New
Code
value
Minimum
Maximum
Default
Firmware Rev.
Q
FR
Numeric
-
-
-
Table 7.2
R325P User Manual Page 11 of 20 5/29/2013 Version 1.01
Communicating with the R325P
1. Connect P1 to PC via RS485-232 Converter Card or USB485
Converter Card.
2. Set up HyperTerminal by selecting correct COM port
3. Settings for HyperTerminal is as follows: 57600, 8 bits, None,
1, None
4. The R325P Driver only version allows for changing the hold
timeout settings, the amount of mixed decay, and to check the
firmware revision level.
RS485-232 Converter Card
Image 7.1
USB485 Converter Card
Image 7.2 R325P User Manual Page 12 of 20 5/29/2013 Version 1.01
8. COMMANDS
Protocol Syntax
Command Format: #<Address><Command><value><CR><LF>
Example: #AHT1000<CR><LF>
Sets the Hold Timeout for Driver A to 1000
To query a command use the following format
Query Format: #<Address><Command><CR><LF>
Example: #AFR<CR><LF>
Queries Driver A for the current Firmware Revision
The response would be in the following format
Response Format: *<Address><value>
Example: *AFR325100
R325P firmware revision 1.00
<CR><LF> stand for "Carriage Return" and "Line Feed"
respectively. These are NOT characters to be typed in. For direct
keyboard users, these values are executed when the "Return" key
is pressed. For programmers, a "Carriage Return" and "Line Feed"
(also known as a "New Line") command needs to be executed after
each command.
Command
(Case Sensitive)
Operand
Example
Descrtption
HT
100 -5000
#AHT100
Sets the Hold Timeout to 100 mS
Hold Timeout - Command or Query, Default = 500
- Reads or sets the time interval in milliseconds after any motor
movement, before the motor current is changed from Run Current to
Hold Current.
PF
0 - 3
#APF1
Sets Mixed Mode damping to 48%
Percent Fast Decay - Command or Query, Default = 2
- Allows the Damping Mode of the driver IC to be set.
0 = Slow Decay
1 = Mixed Mode 15%
2 = Mixed Mode 48%
3 = 100% Fast Decay
The optimum setting will vary with motor inductance and step
rate; however the default Mixed Mode setting will work with most
motors
FR
-
#AFR
Firmware Revision - Query Only
- Returns 3 digit part code followed by 3 digit firmware
revision.
Reply: *AFR325100 //R325P firmware revision 1.00
SD
-
#ASD
Save Data – After all desired changes have been made, type #ASD
in order to save the data to memory.
LD
-
#ALD
Load Default Settings – Used to revert back to default settings.
TI
-
#ATI
Test Inputs – Query Only
- This command will return a value which corresponds to the
ON/OFF sequence of all 3 inputs R325P User Manual Page 13 of 20
5/29/2013 Version 1.01
9. Troubleshooting
R325P is not functioning correctly
Try putting the R325P into TEST mode by placing a jumper on Pins
3 & 4 of J1 as shown below. The motor should twitch back and
forth slightly if the R325P is functioning properly.
R325P not moving the motor (Step/Dip)
Verify that the 5V is being supplied to Pin 1.
The R325P is causing the motor to vibrate and jitter back and
forth
Are the Motor phases switched? Be sure to check that motor wires
are connected to Pins 6 through 9, in the order of A, A Bar, B, B
Bar. To check which wires belong to one phase, take a Meter to
measure resistance between any two wires. If there is a finite
value between two of them, insert the wires into pins 6 and 7, OR
pins 8 and 9. Insert the remaining two wires accordingly.
Technical Support
By Telephone: 408-919-0200
(Monday-Friday; 8:00 AM - 5:00PM Pacific)
On the Web: www.linengineering.com
Our technical support group is glad to work with you in answering
your questions. If you cannot find the solution to your
particular application, or, if for any reason you need additional
technical assistance, please call technical support at 408-919-
0200.
R325P User Manual Page 14 of 20 5/29/2013 Version 1.01
10. Appendix A: Recommended Cable
Recommended Cable Configurations: DC Supply to Driver
Cable length, wire gauge and power conditioning devices play a
major role in the performance of your RMS Technologies Driver and
Motor.
NOTE: The length of the DC power supply cable to the Driver
should not exceed 50 feet.
Example A – Cabling Under 50 Feet, DC Power
Example A demonstrates the recommended cable configuration for DC
power supply cabling under 50 feet long. If cabling of 50 feet or
longer is required, the additional length may be gained by adding
an AC power supply cable.
Correct AWG wire size is determined by the current requirement
plus cable length. Please see the Driver Supply Cable AWG Table
in this Appendix.
R325P User Manual Page 15 of 20 5/29/2013 Version 1.01
NOTE: These recommendations will provide optimal protection
against EMI and RFI. The actual cable type, wire gauge, shield
type and filtering devices used are dependent on the customer’s
application and system.
Driver Supply Cable AWG Table
1 Amp (Peak)
Length (Feet)
10
25
50*
75*
100*
Minimum AWG
20
20
18
18
16
2 Amps (Peak)
Length (Feet)
10
25
50*
75*
100*
Minimum AWG
20
18
16
14
14
3 Amps (Peak)
Length (Feet)
10
25
50*
75*
100*
Minimum AWG
18
16
14
12
12
* Use the alternative methods illustrated in Examples B and C
when the cable length is ≥ 50 feet. Also, use the same current
rating when the alternate AC power is used
Driver Supply Cable Wire Size
NOTE: Always use Shielded/Twisted Pairs for the Driver DC Supply
Cable, the AC Supply Cable and the Driver to Motor Cable.
R325P User Manual Page 16 of 20 5/29/2013 Version 1.01
Recommended Cable Configurations: Driver to Motor
Cable length, wire gauge and power conditioning devices play a
major role in the performance of your Driver and Motor.
NOTE: The length of the DC power supply cable between the Driver
and the Motor should not exceed 50 feet.
Example A demonstrates the recommended cable configuration for
the Driver to Motor cabling under 50 Feet long.
Correct AWG wire size is determined by the current requirement
plus cable length. Please see the Driver to Motor Cable AWG Table
in this Appendix.
Example A - Cabling Under 50 Feet, Driver to Motor
If cabling of 50 feet or longer is required, the additional
length can be gained by adding Common Mode Line Filters (2x)
*L ≈ 0.5 MH R325P User Manual Page 17 of 20 5/29/2013 Version
1.01
* 0.5 MH is a typical starting point for the Common Mode Line
Filters. By increasing or decreasing the value of L you can set
the drain current to a minimum to meet your requirements.
Driver to Motor Cable AWG Table
1 Amp (Peak)
5 Amp (Peak)
Length (Feet)
10
25
50
75
100
Length (Feet)
10
25
50
75
100
Minimum AWG
20
20
18
18
16
Minimum AWG
16
16
14
12
12
2 Amp (Peak)
6 Amp (Peak)
Length (Feet)
10
25
50
75
100
Length (Feet)
10
25
50
75
100
Minimum AWG
20
18
16
14
14
Minimum AWG
14
14
14
12
12
3 Amp (Peak)
7 Amp (Peak)
Length (Feet)
10
25
50
75
100
Length (Feet)
10
25
50
75
100
Minimum AWG
18
16
14
12
12
Minimum AWG
12
12
12
12
12
4 Amp (Peak)
Length (Feet)
10
25
50
75
100
Minimum AWG
18
16
14
12
12
Driver to Motor Supply Cable Wire Size
NOTE: These recommendations will provide optimal protection
against EMI and RFI. The actual cable type, wire gauge, shield
type and filtering devices used are dependent on the customer’s
application and system.
NOTE: Always use Shielded/Twisted Pairs for the Driver DC Supply
Cable, the AC Supply Cable and the Driver to Motor Cable.
R325P User Manual Page 18 of 20 5/29/2013 Version 1.01
11. Appendix B: PF value
For applications requiring ultimate smoothness of motion and
extreme accuracy, the R325P driver can be programmed via RS485 to
change the Percent Fast Decay rate, or, the PF value.
The Percent Fast Decay default is 2, or a mixed mode of 48%.
Mixed mode is a damping technique done to the driver IC. The
following values indicate the choices for Percent Fast Decay:
PF values (0 through 3):
0 = Slow Decay
1 = Mixed Mode 15%
2 = Mixed Mode 48%
3 = 100% Fast Decay
Generally speaking, applications that run at slow speeds are
recommended to use a PF value of 1 or less. Fast speeds should
use a PF value of 2 or more. Since the best PF value is dependent
on the motor winding, loads, power supply voltage, and other
factors, it is best to use an oscilloscope and a current probe
device to view the current waveform and try different PF values.
The following examples show good and bad waveforms when choosing
different PF values.
? PF value 1
? Slow speeds
? Good waveform R325P User Manual Page 19 of 20 5/29/2013 Version
1.01
? PF value 3
? Slow speeds
? Bad waveform
? PF value 1
? Fast speeds
? Bad waveform
R325P User Manual Page 20 of 20 5/29/2013 Version 1.01
HDS1160K21 and HDS1160K51
LINER,PN:112871，TDS-8SA,厂家：VARCO 1件
LINER,PN:30153492,TDS-8SA厂家：VARCO 1件
Aerotech BA10-320
Cutler-Hammer FD3200
UVH1LP11K
Augat PCS-069A-1
Datasensor SG4-RB2-050-OO-W (957951030) – 2 BEAM TYPE 4
Datasensor SG4-RDB2 (957951100) – 500 PASSIVE BAR
Datasensor CS-R1-40-B-0015 – REFL 12to8 POLE ADAPTOR
AUGAT - PCS-084A-1 - Connector
"AB PHAROS MARINE
" AB PHAROS MARINE/9045 0983B
AB PHAROS MARINE/9045 0983Y
1.MARPOSS E34B CPU MI2 486 数量2
2.ELOMATIC PNEUMATIC ACTUATOR SERIES ES REF.EL-O-MATIC
model:ES12/A/N2/NBR,COMPLETE ASSY 数量2
旋转接头 GP-341-ES12A,品牌DSTI，数量1件
kentintrol型号19-839序列号SN510390001
力士乐。 R911288365 PPC-R01.2N-N-P2-FW
R911291864 FWA-PPCR0*-SY*-08VRS-MS-P2XXXX
GE CR9500C108CA2A
442-1327836 LOCTITE NDBK HI/IM WC 25LB M/L
156-500508-047/CAT NO MTI-3150E4TPXX 美国chromalox
A8245-9215KME A4904-9215KME VEXTA
S42024-L5583-A1 4 X GE/T TNX:A4B0000011267
S42024-L5495-A1 8 X FE/L2 TNX:A4B0000008828
S42024-L5585-A1-5 CC + STM 16|4|1 (Switch fabric Prot
33G/10G, STM 16/4/1) TNX:A4B00000011266
S42024-L5561-A1-6 SCE PLUS TNX:A4B0000011265
TNX: A4B0000011264 Siemens SDH Core HIT 7035 ADM-16/-4/-
1config. w/o Prot., >=R4.4
S42024-L5294-A1-9 System controller card for NSN SDH HIT
7060 HC Node
施耐德 ISH100/30058/0/0/00/0/00/01/00
GE 5GE752RB3B
意大利ABAC空压机 型号B7000
品牌SC气动泵 10-600w020L 35:1
意大利ABAC空压机 型号B7000 62NC701 B6000/270 CT B6000 270 C 685
24 5,5 4,1 1200 400/50 11 159 1520x590x1260h 205/451 3.600.000
1.859,24 70NC801 B7000/270 CT B7000 270 C 1023 36 7,5 5,5 1100
400/50 11 159 1520x590x1260h 210/462 4.900.000 2.530,64
70NN805 B7000/270 FT B7000 270 F 1023 36 7,5 5,5 1100 400/50 11
159 1520x590x1260h 210/462 4.800.000 2.478,99
70NC901 B7000/270 CT B7000 270 C 1210 42,7 10 7,4 1300 400/50 11
159 1520x590x1260h 220/484 5.200.000 2.685,58
70NN905 B7000/270 FT B7000 270 F 1210 42,7 10 7,4 1300 400/50 11
159 1520x590x1260h 220/484 5.100.000 2.633,93
70TC801 B7000/500 CT B7000 500 C 1023 36 7,5 5,5 1100 400/50 11
159 2030x680x1400h 290/638 5.580.000 2.881,83
70TN805 B7000/500 FT B7000 500 F 1023 36 7,5 5,5 1100 400/50 11
159 2030x680x1400h 295/649 5.480.000 2.830,18
70TC901 B7000/500 CT B7000 500 C 1210 42,7 10 7,4 1300 400/50 11
159 2030x680x1400h 295/649 5.900.000 3.047,10
70TN905 B7000/500 FT B7000 500 F 1210 42,7 10 7,4 1300 400/50 11
159 2030x680x1400h 295/649 5.800.000 2.995,45
70RB905 B7000/900 FT B7000 900 F 1210 42,7 10 7,4 1300 400/50 11
159 2070x800x1570h 400/880 7.700.000 3.976,72
62TC701 B6000/500 CT B6000 500 C 685 24 5,5 4,1 1200 400/50 11
159 2030x680x1400h 275/605 4.300.000 2.220,76
62TN705 B6000/500 FT B6000 500 F 685 24 5,5 4,1 1200 400/50 11
159 2030x680x1400h 275/605 4.200.000 2.169,12
62NC801 B6000/270 CT B6000 270 C 827 29,2 7,5 5,5 1450 400/50 11
159 1520x590x1260h 210/462 4.080.000 2.107,14
62NN805 B6000/270 FT B6000 270 F 827 29,2 7,5 5,5 1450 400/50 11
159 1520x590x1260h 210/462 4.000.000 2.065,83
62TC801 B6000/500 CT B6000 500 C 827 29,2 7,5 5,5 1450 400/50 11
159 2030x680x1400h 280/616 4.800.000 2.478,99
62TN805 B6000/500 FT B6000 500 F 827 29,2 7,5 5,5 1450 400/50 11
159 2030x680x1400h 280/616 4.700.000 2.427,35 S42024-L5583-A1 4
X GE/T TNX:A4B0000011267
S42024-L5495-A1 8 X FE/L2 TNX:A4B0000008828
S42024-L5585-A1-5 CC + STM 16|4|1 (Switch fabric Prot
33G/10G, STM 16/4/1) TNX:A4B00000011266
S42024-L5561-A1-6 SCE PLUS TNX:A4B0000011265
TNX: A4B0000011264 Siemens SDH Core HIT 7035 ADM-16/-4/-
1config. w/o Prot., >=R4.4
S42024-L5294-A1-9 System controller card for NSN SDH HIT
7060 HC Node
OMRON 歐姆龍 PLC MODEL : CPM1A-10CDR-A-V1 INPUT : DC 24V
MITSUBISHI 三菱 PLC CC-LINK INPUT UNIT MODEL : AJ65BTB1-16D INPUT
: DC 24V
KOYO PLC PROGRAMMABLE CAM SWITCH MODEL : FC-21 INPUT : 1PH AC
100V / AC 200V
FUJI ELECTRIC 富士電機 PLC EXPANSION I/O UNIT MODEL : NW0E60R-31
INPUT : 1PH AC 100V ~ AC 240V
MITSUBISHI 三菱 PLC INPUT / OUTPUT UNIT MODEL : AX40Y50C
TSUBAKI AC SERVO DRIVER MODEL : KD2001GBS-S80 INPUT : AC 200V /
AC 220V 100W
FUJI ELECTRIC 富士電機 AC SERVO DRIVER MODEL : RYE1.1P-Z4 INPUT :
3PH AC 200V ~ AC 230V 1100W
FUJI ELECTRIC 富士電機 AC SERVO DRIVER MODEL : RYE.20D INPUT : 1PH
/ 3PH AC 200V ~ AC 230V 200W
FUJI ELECTRIC 富士電機 AC SERVO DRIVER MODEL : RYE.05S 50W
YASKAWA 安川 SERVOPACK MODEL : SGDJ-02EPY28 INPUT : DC 48V 200W
YASKAWA 安川 SERVOPACK MODEL : SGDJ-03EP INPUT : DC 48V 300W
YASKAWA 安川 SERVOPACK MODEL : SGDJ-A1EPY32 INPUT : DC 48V 10W
YASKAWA 安川 SERVOPACK MODEL : SGDJ-03EPY21 INPUT : DC 48V 300W
MITSUBISHI 三菱 TOUCHSCREEN GRAPHIC OPERATION TERMINAL MODEL :
GT1572-VNBA + GT15-QBUS
YASKAWA 安川 SERVOPACK MODEL : CACR-SR03AC1ER
YASKAWA 安川 SERVOPACK MODEL : CACR-SR03AC1ER
YASKAWA 安川 SERVOPACK MODEL : CACR-HRA5AAB12-1 INPUT : 1PH AC
200V ~ AC 230V 50W
YASKAWA 安川 SERVOPACK MODEL : DR2-08AC INPUT : 1PH AC 200V
NISSEI MOTOR DRIVER MODEL : V-XY 2002 INPUT : 1PH AC 200V
TOSHIBA TOEI ELECTRIC VELCONIC AC SERVO DRIVER MODEL : VLASV-
012P2-RV
TOSHIBA TOEI ELECTRIC VELCONIC AC SERVO DRIVER MODEL : VLASV-
035P3-EV
YASKAWA 安川 SERVOPACK MODEL : SGDH-02AE+JUSP-NS100 VER.04106
INPUT : 1PH AC 200V ~ AC 230V 200W
YASKAWA 安川 REGENERATIVE UNIT MODEL : JUSP-RG08
YASKAWA 安川 MODEL : JUSP-NS200-FK
YASKAWA 安川 SERVOPACK MECHATROLINK I/F UNIT MODEL : JUSP-NS100 M
VER.0610D
TAMAGAWA SEIKI 多摩川精機 TBL-i SERIES AC SERVO MOTOR MODEL :
TS4503N7007E100 100V 100W
ORIENTAL MOTOR 東方馬達 STEPPING MOTOR MODEL : A4904-9215KME
ORIENTAL MOTOR 東方馬達 SPEED CONTROL MOTOR MODEL : 2IK6RGN-A 6W
ORIENTAL MOTOR 東方馬達 VEXTA MODEL : FBL575CW-50 ( 內含 FBLD75CW
+ FBLM575W-GFB + GFB5G50 )
ORIENTAL MOTOR 東方馬達 INDUCTION MOTOR MODEL : 0IK3GN-D 3W
MTI-330A
MTI-330AOMRON AC SERVO DRIVER MODEL : R88D-WT02H + R88A-NCW152-
DRT 200W
OMRON AC SERVO DRIVER MODEL : R7D-AP02L INPUT : 1PH AC 100V ~ AC
115V 200W
OMRON AC SERVO DRIVER MODEL : R88D-UP12LA INPUT : AC 100V / 110V
200W
OMRON AC SERVO DRIVER MODEL : R88D-WTA5H INPUT : 1PH AC 200V ~ AC
230V 50W
OMRON AC SERVO DRIVER MODEL : R88D-WTA5HL INPUT : 1PH AC 100V ~
AC 115V 50W
OMRON INVERTER SYSDRIVER MODEL : 3G3IV-A2037-EV1 3.7KW 5HP
OMRON AC SERVO DRIVER MODEL : R88D-UP10L INPUT : AC 100V / 110V
100W
OMRON AC SERVO DRIVER MODEL : R7D-APA3H INPUT : 1PH AC 200V ~ AC
230V 30W
OMRON AC SERVO DRIVER MODEL : R7D-AP01H INPUT : 1PH AC 200V ~ AC
230V 100W
OMRON AC SERVO DRIVER MODEL : R7D-AP02H INPUT : 1PH AC 200V ~ AC
230V 200W
OMRON AC SERVO DRIVER MODEL : R7D-ZP04H INPUT : 1PH AC 200V ~ AC
230V 400W
OMRON POWER SUPPLY MODEL : R88S-H310G INPUT : AC 200V / AC 220V
OMRON AC SERVO DRIVER MODEL : R88D-UP04HA INPUT : AC 200V / AC
230V 100W
OMRON AC SERVO DRIVER MODEL : R88D-WT01H + R88A-NCW152-DRT 100W
OMRON AC SERVO DRIVER MODEL : R7D-AP08H INPUT : 1PH AC 200V ~ AC
230V 750W
OMRON AC SERVO DRIVER MODEL : R88D-GN02H-ML2 INPUT : 1PH AC 200V
/ 240V 200W 盒裝 (NEW)
OMRON INVERTER SYSDRIVER MODEL : 3G3MV-A2022 4.2KVA 3HP (NEW)
OMRON AC SERVO DRIVER MODEL : R88D-KN02H-ML2 INPUT : 1PH / 3PH AC
200V ~ AC 230V 200W
OMRON AC SERVO DRIVER MODEL : R7D-AP01L INPUT : 1PH AC 100V ~ AC
115V 100W
OMRON AC SERVO DRIVER MODEL : R88D-GN08H-ML2 INPUT : 1PH / 3PH AC
200V / 240V 750W
OMRON AC SERVO DRIVER MODEL : R88D-UP12L INPUT : AC 100V / 110V
200W
OMRON AC SERVO DRIVER MODEL : R88D-UP04LA INPUT : AC 100V / 110V
50W
OMRON AC SERVO DRIVER MODEL : R88D-UP04L INPUT : AC 100V / 110V
50W
OMRON AC SERVO DRIVER MODEL : R88D-WN10H-ML2 INPUT : 3PH AC 200V
~ AC 230V 1KW
OMRON AC SERVO DRIVER MODEL : R88D-GN01L-ML2 INPUT : 1PH AC 100V
~ AC 115V 100W
OMRON AC SERVO DRIVER MODEL : R88D-GN02L-ML2 INPUT : 1PH AC 100V
/ 115V 200W
OMRON AC SERVO DRIVER MODEL : R88D-HS10 INPUT : 1PH AC 100V ~ AC
200V 65VA
OMRON AC SERVO DRIVER MODEL : R88D-MT50 INPUT : AC 200V / AC 220V
90VA
OMRON AC SERVO DRIVER MODEL : R88D-HS22 INPUT : 1PH AC 100V ~ AC
220V 65VA
OMRON AC SERVO DRIVER MODEL : R88D-HS22 INPUT : 1PH AC 100V ~ AC
220V 65VA
OMRON AC SERVO DRIVER MODEL : R88D-HS22 INPUT : 1PH AC 100V ~ AC
220V 65VA
OMRON AC SERVO DRIVER MODEL : R88D-HT04 INPUT : 1PH AC 200V / AC
220V 65VA
OMRON AC SERVO DRIVER MODEL : R7D-AP04H INPUT : 1PH AC 200V ~ AC
230V 400W
OMRON POSITION DRIVER MODEL : FND-X06H-SRT INPUT : AC 200V ~ AC
240V 23W
OMRON AC SERVO DRIVER MODEL : R88D-GN02L-ML2 INPUT : 1PH AC 100V
/ 115V 200W
OMRON AC SERVO DRIVER MODEL : R88D-GTA5L INPUT : 1PH AC 100V ~ AC
115V 50W
OMRON AC SERVO DRIVER MODEL : R7D-BPA5L INPUT : 1PH AC 100V ~ AC
115V 50W
OMRON AC SERVO DRIVER MODEL : R88D-WN10H-ML2 INPUT : 3PH AC 200V
~ AC 230V 1KW
OMRON AC SERVO DRIVER MODEL : R88D-WN20H-ML2 INPUT : 3PH AC 200V
~ AC 230V 2KW
OMRON AC SERVO DRIVER MODEL : R88D-GN01L-ML2 INPUT : 1PH AC 100V
~ AC 115V 100W
OMRON AC SERVO DRIVER MODEL : R88D-KN04H-ML2 INPUT : 1PH / 3PH AC
200V ~ AC 230V 400W
OMRON AC SERVO DRIVER MODEL : R7D-APA5H INPUT : 1PH AC 200V ~ AC
230V 50W
OMRON POSITION DRIVER MODEL : FND-X12H-SRT INPUT : AC 200V / AC
240V 23W
OMRON AC SERVO DRIVER MODEL : R88D-UP10L INPUT : AC 100V / 110V
100W
OMRON POSITION DRIVER MODEL : FND-X12H INPUT : AC 200V ~ AC 240V
23W
OMRON AC SERVO DRIVER MODEL : R88D-GT50H INPUT : 3PH AC 200V ~ AC
230V 5.0KW
OMRON AC SERVO DRIVER MODEL : R88D-GT30H INPUT : 3PH AC 200V ~ AC
230V 3.0KW
OMRON AC SERVO DRIVER MODEL : R7D-AP02L INPUT : 1PH AC 100V ~ AC
115V 200W
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PK564BW-A22
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PK564-NBC
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : ASM66MA
ORIENTAL MOTOR INDUCTION MOTOR MODEL : 0IK3GN-D 3W
ORIENTAL MOTOR BRUSHLESS DC MOTOR MODEL : AXUM425-A 25W
ORIENTAL MOTOR VEXTA STEPPING MOTOR MODEL : PK543AU-TG10
ORIENTAL MOTOR VEXTA BRUSHLESS DC MOTOR MODEL : FBLM440C-GF 40W
ORIENTAL MOTOR SPEED CONTROL MOTOR MODEL : MSM206-401 + 2GN7.5K
6W
ORIENTAL MOTOR SPEED CONTROL MOTOR MODEL : USM425-402W 25W
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PK569H-B
ORIENTAL MOTOR STEPPING MOTOR MODEL : A4904-9215KME
ORIENTAL MOTOR VEXTA 2-PHASE STEPPING MOTOR MODEL : PH264-01
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : ASM66AA-P25
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : UPH596AW-T7.2
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PK569-NB-A1
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : UPH566-AM
ORIENTAL MOTOR OM REVERSIBLE MOTOR MODEL : 0RK1GN-AU 1W
ORIENTAL MOTOR VEXTA BRUSHLESS DC MOTOR MODEL : BXM460M-GFS +
GFS4G100 60W
ORIENTAL MOTOR 2-PHASE STEPPING MOTOR MODEL : PK245-01A
ORIENTAL MOTOR OM REVERSIBLE MOTOR MODEL : 0RK1GN-A + 0GN50K 1W
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PK596AW-T7.2
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PV566A
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PK564AN-TG10
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PK243-01A
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PK564AU-HG100
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PK566AW
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PK569H-NBC
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PK569BHW
ORIENTAL MOTOR VEXTA 5-PHASE STEPPING MOTOR MODEL : PK569-B
ORIENTAL MOTOR AC SERVO MOTOR MODEL : NXM975M
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : PMD07CV
ORIENTAL MOTOR SPEED CONTROLLER MODEL : SS302N
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : UDK5114VN INPUT : 1PH
AC 100V / AC 115V
ORIENTAL MOTOR VEXTA STEPPING DRIVER MODEL : PMD03CA + PMM33A-
MG20
ORIENTAL MOTOR VEXTA AC SERVO DRIVER MODEL : ASD30A-A INPUT : 1PH
AC 100V ~ AC 115V
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : UDK5128N-M INPUT :
1PH AC 100V / AC 115V
ORIENTAL MOTOR AC SERVO DRIVER MODEL : ASD16A-S INPUT : 3PH AC
200V ~ AC 230V
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : UDK5214N-M INPUT :
1PH AC 200V
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : CSD5714B
ORIENTAL MOTOR VEXTA AC SERVO DRIVER MODEL : ASD12A-CD INPUT :
1PH AC 200V ~ AC 230V
ORIENTAL MOTOR VEXTA AC SERVO DRIVER MODEL : ASD24B-A INPUT : 1PH
AC 100V ~ AC 115V
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : RKD514LM-C INPUT :
1PH AC 200V ~ AC 230V
ORIENTAL MOTOR VEXTA AC SERVO DRIVER MODEL : ASD10B-K
ORIENTAL MOTOR VEXTA CYLINDER MOTOR DRIVER MODEL : DCU14 INPUT :
1PH AC 100V / AC 115V
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : DFC5114T
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : RKD514H-A INPUT : 1PH
AC 100V ~ AC 115V
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : RK543AA-H50
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : CSK564AP-TG7.2
ORIENTAL MOTOR VEXTA BRUSHLESS DC MOTOR DRIVER MODEL : BLED3C-CC
ORIENTAL MOTOR STEPPING MOTOR DRIVER MODEL : CRD507-KD INPUT : DC
24V
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : CRD5107HPB
ORIENTAL MOTOR VEXTA BRUSHLESS DC MOTOR DRIVER MODEL : BXD120A-C
ORIENTAL MOTOR VEXTA CONTROLLER MODEL : XG9200-2G INPUT : DC 24V
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : DFU1514W-M INPUT :
1PH AC 100V ~ AC 115V
ORIENTAL MOTOR VEXTA 2-PHASE DRIVER MODEL : CSD2109-P
1）日本SMC，美国PARKER气动元件：电磁阀、气缸、三联件、压力表、管接
头等。（价格优惠）。
(2)日本ULVAC全系列真空元件，其中GP-1S,WP-01，WP-02大量库存。
（3）日本YUKEN（油研）油压元件：油压泵、压力、流量、方向控制阀、比例
阀等。
货期快捷及时，并可提供咨询、指导及油路分析！
（4）TOP-AIR、NACHI、REXROTH、TOKIMIEC、君帆、PISCO元件：全系列气动
元件。
（5）意大利TECNOLOGIC智能温控器,台湾TORMO温控器TFCEU-01S，TFCEU-02M
，TFCEU-03R，TFCEU-06R，TFCE-01S，TFCE-02M，TFCE-03R，TFCE-
05MR,TF64915-2AS
（5）日本Digital公司：GP系列触摸屏，台湾海泰克，台湾威伦全系列触摸屏
。
现货特价供应GP37W2-BG41-24V，蓝底黑白5.7英寸屏
（6）日本OMRON（欧姆龙）：（部分元器件价格特价供应，货期快捷及时）
（7）日本IDEC（和泉）：按钮、指示灯、继电器。
（8）台湾MW（明纬）：直流开关电源。
（9）光电开关、近接开关：特价供应国产（Jorder、Aotoro）和台湾产品
（FOTEK、Riko、KFPS）等。（可提供选型指导和不同品牌之间的替换）
（10）固态继电器、电力调整器：单相、三相电力调整器、调速器。
（11）日本FUJI（富士）：接触器、空气开关、可编程序控制器、变频器、温
度表。
（12）日本Mitsubishi（三菱）：低压电器、可编程序控制器、变频器、伺服
系统。
特别说明：本公司可为客户寻找、代购日本和台湾工控急件、备件或不常见品
牌产品，也可根据客户的需要，进行相应替换和选型。能为客户提供很大的便
利。
其他经销品牌如下：
电气品牌：德国SICK（施克）、P+F（倍加福）、Turck（图尔克）、SUNX（神
视）、韩国LG、NEMICON、Panasonic（松下）、ABB、A-B、TAIAN（台安）、
Delta（台达）、Schneider（施耐得）、金钟默勒（Moeller）、TECO（东元
）、Yaskawa（安川）、ORIENTALMOTOR（东方马达）、PHOENIX（菲尼克斯）
气动品牌：MINDMAN（金器）、CKD、KOGANEI（小金井）、FESTO（费斯托）、
SANWO（三和）、AIRTAC（亚德克）
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : UDX5114N-A2
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : CSD5814N-P
ORIENTAL MOTOR SPEED CONTROL UNIT MODEL : FSP200-2 INPUT : 1PH AC
200V ~ AC 230V
ORIENTAL MOTOR VEXTA 5-PHASE DRIVER MODEL : UDX5107
ORIENTAL MOTOR VEXTA MODEL : ASC66AK-N10
NS
NS
187661
187688
55
MTI-330E2
MTI-330E2
NS
NS
187670
187696
88
MTI-330E4TP
MTI-330E4TP
NS
NS
064320
064338
11
11
4.5
4.5
240
480
33
48
48
33
10-7/8
10-7/8
MTI-345A
MTI-345A
NS
NS
187709
187725
66
MTI-345E2
MTI-345E2
NS
NS
187717
187733
99
MTI-345E4TP
MTI-345E4TP
NS
NS
064346
064354
12
12
66
240
480
33
48
48
33
17-1/8
17-1/8
MTI-360A
MTI-360A
NS
NS
187741
187768
66
MTI-360E2
MTI-360E2
NS
NS
187750
187776
99
MTI-360E4TP
MTI-360E4TP
NS
NS
064362
064370
12
12
7.5
7.5
240
480
33
53
53
33
19-1/8
19-1/8
MTI-375A
MTI-375A
NS
NS
187784
187805
66
MTI-375E2
MTI-375E2
NS
NS
187792
187813
99
MTI-375E4TP
MTI-375E4TP
NS
NS
064389
064397
12
12
99
240
480
33
47
47
33
24-1/2
24-1/2
MTI-390A
MTI-390A
NS
NS
187821
187848
77
MTI-390E2
MTI-390E2
NS
NS
187830
187856
10
10
MTI-390E4TP
MTI-390E4TP
NS
NS
064400
064418
13
13
12
12
240
480
33
46
46
33
32-1/4
32-1/4
MTI-3120A
MTI-3120A
NS
NS
187864
187880
99
MTI-3120E2
MTI-3120E2
NS
NS
187872
187899
12
12
MTI-3120E4TP
MTI-3120E4TP
NS
NS
064266
064274
15
15
15
15
240
480
33
46
46
33
39-3/8
39-3/8
MTI-3150A
MTI-3150A
NS
NS
187901
187928
10
10
MTI-3150E2
MTI-3150E2
NS
NS
187910
187936
13
13
MTI-3150E4TP
MTI-3150E4TP
NS
NS
064282
064290
16
16
18
18
240
480
3351
51
33
47-3/8
47-3/8
MTI-3180A
MTI-3180A
NS
NS
187944
187960
12
12
MTI-3180E2
MTI-3180E2
NS
NS
187952
187979
15
15 156-500508-047/CAT NO MTI-3150E4TPXX 美国chromalox
MTI-3180E4TP
MTI-3180E4TP
NS
NS
064303
064311
18GP-120 0.5 [0.7] 1.3 [1.8] 2.1 [2.8] 2.8 [3.8] 3.6 [4.9] 4.3
[5.8] 5.1 [6.9] 6.3 [8.5]
GP-121 1.9 [2.6] 3.7 [5.0] 5.4 [7.3] 7.1 [9.6] 8.8 [11.9] 10.5
[14.2] 12.3 [16.7] 14.9 [20.2]
GP-220 3.9 [5.3] 7.3 [9.9] 10.7 [14.5] 14.2 [19.3] 17.6 [23.9]
21.1 [28.6] 24.5 [33.2] 29.7 [40.3]
GP-221 5.7 [7.7] 11.8 [16.0] 17.9 [24.3] 24.1 [32.7] 30.2 [40.9]
36.3 [49.2] 42.5 [57.6] 51.6 [70.0]
GP-320 4.0 [5.4] 8.7 [11.8] 13.4 [18.2] 18.0 [24.4] 22.7 [30.8]
27.4 [37.1] 32.1 [43.5] 39.2 [53.1]
GP-321 7.1 [9.6] 21.6 [29.3] 36.1 [48.9] 50.6 [68.6] 65.1 [88.3]
79.5 [107.8] 94.1 [127.6] 115.7 [156.9]
GP-420 5.7 [7.7] 11.8 [16.0] 17.9 [24.3] 24.1 [32.7] 30.2 [40.9]
36.3 [49.2] 42.5 [57.6] 51.6 [70.0]
GP-421 12.2 [16.5] 33.0 [44.7] 53.9 [73.1] 74.7 [101.3] 95.6
[129.6] 116.4 [157.8] 137.3 [186.2] 168.6 [228.6]
GP-621 24.4 [33.1] 71.3 [96.7] 118.2 [160.3] 165.2 [223.0] 212.1
[287.6] 259.0 [351.2] 305.9 [414.7] 376.3 [510.2]
GP-130 1.5 [2.0] 3.1 [4.2] 4.7 [6.4] 6.3 [8.5] 7.9 [10.7] 9.5
[12.9] 11.1 [15.0] 13.5 [18.3]
GP-131 2.6 [3.5] 4.9 [6.6] 7.2 [9.8] 9.5 [12.9] 11.8 [16.0] 14.1
[19.1] 16.4 [22.2] 19.8 [26.8]
GP-230 5.3 [7.2] 11.6 [15.7] 17.8 [24.1] 24.1 [32.7] 30.3 [41.1]
36.6 [49.6] 42.8 [58.0] 52.2 [70.8]
GP-231 7.6 [10.3] 15.8 [21.4] 23.9 [32.4] 32.1 [43.5] 40.3 [54.6]
48.4 [65.6] 56.6 [76.7] 68.9 [93.4]
GP-330 7.6 [10.3] 15.8 [21.4] 23.9 [32.4] 32.1 [43.5] 40.3 [54.6]
48.4 [65.6] 56.6 [76.7] 68.9 [93.4]
GP-331 9.5 [12.9] 28.8 [39.0] 48.1 [65.4] 67.4 [91.4] 86.7
[117.4] 106.0 [143.7] 125.4 [170.0] 154.3 [209.2]
GP-430 9.5 [12.9] 28.8 [39.0] 48.1 [65.4] 67.4 [91.4] 86.7
[117.4] 106.0 [143.7] 125.4 [170.0] 154.3 [209.2]
GP-431 16.2 [21.3] 44.0 [59.7] 71.8 [97.3] 99.6 [135.0] 127.4
[172.7] 155.2 [210.4] 183.1 [248.3] 224.8 [304.8]
GP-530 16.2 [21.3] 44.0 [59.7] 71.8 [97.3] 99.6 [135.0] 127.4
[172.7] 155.2 [210.4] 183.1 [248.3] 224.8 [304.8]
GP-630 24.7 [33.5] 74.2 [100.6] 123.6 [167.6] 173.0 [234.6] 222.5
[301.7] 271.9 [368.6] 321.3 [435.6] 395.5 [536.2]
GP-140 1.9 [2.6] 3.9 [5.3] 5.9 [8.0] 7.9 [10.7] 9.9 [13.4] 11.9
[16.1] 13.9 [18.8] 16.9 [22.9]
GP-141 3.2 [4.3] 6.1 [8.27] 9.0 [12.2] 11.8 [16.0] 14.7 [19.9]
17.6 [23.9] 20.4 [27.7] 24.8 [33.6]
GP-240 6.6 [8.9] 14.4 [19.5] 22.3 [30.2] 30.1 [40.8] 37.9 [51.4]
45.7 [62.0] 53.5 [72.5] 65.3 [88.5]
GP-241 9.5 [12.9] 19.7 [26.7] 29.9 [40.5] 40.1 [54.4] 50.3 [68.2]
60.5 [82.0] 70.8 [96.0] 86.1 [116.7]
GP-340 9.5 [12.9] 19.7 [26.7] 29.9 [40.5] 40.1 [54.4] 50.3 [68.2]
60.5 [82.0] 70.8 [96.0] 86.1 [116.7]
GP-341 11.9 [16.1] 36.0 [48.8] 60.2 [81.6] 84.3 [114.3] 108.4
[147.0] 132.6 [179.8] 156.7 [212.5] 192.9 [261.5]
GP-440 11.9 [16.1] 36.0 [48.8] 60.2 [81.6] 84.3 [114.3] 108.4
[147.0] 132.6 [179.8] 156.7 [212.5] 192.9 [261.5]
GP-441 20.3 [27.5] 55.0 [74.6] 89.8 [121.8] 124.6 [168.9] 159.3
[216.0] 194.1 [263.2] 228.8 [310.2] 280.9 [380.8]
GP-540 20.3 [27.5] 55.0 [74.6] 89.8 [121.8] 124.6 [168.9] 159.3
[216.0] 194.1 [263.2] 228.8 [310.2] 280.9 [380.8]
GP-641 40.7 [55.2] 118.9 [161.2] 197.1 [267.2] 275.3 [373.3]
353.5 [479.3] 431.7 [585.3] 509.9 [691.3] 627.1 [850.2]GP-161 6.0
[8.13] 13.0 [17.6] 20.0 [27.1] 27.1 [36.7] 34.1 [46.2] 41.1
[55.7] 48.2 [65.4] 58.7 [79.6]
GP-261 9.8 [13.3] 31.3 [42.4] 52.8 [71.6] 74.3 [100.7] 95.8
[129.9] 117.3 [159.0] 138.8 [188.2] 171.0 [231.8]
GP-361 13.1 [17.8] 39.6 [53.7] 66.2 [89.8] 92.7 [125.7] 119.3
[161.7] 145.8 [197.7] 172.4 [233.7] 212.2 [287.7]
GP-460 22.3 [30.2] 60.5 [82.0] 98.8 [134.0] 137.0 [185.7] 175.2
[237.5] 213.5 [289.5] 251.7 [341.3] 309.0 [418.9]
GP-561 43.3 [58.7] 129.8 [176.0] 216.3 [293.3] 302.8 [410.5]
389.3 [527.8] 475.8 [645.1] 562.3 [762.4] 692.0 [938.2]
GP-180 10.4 [14.1] 21.7 [29.4] 32.9 [44.6] 44.1 [59.8] 55.4
[75.1] 66.6 [90.3] 77.8 [105.5] 94.7 [128.4]
GP-280 15.4 [20.9] 46.8 [63.5] 78.2 [106.0] 109.6 [148.6] 140.9
[191.0] 172.3 [233.6] 203.7 [276.2] 250.8 [340.0]
GP-380 26.4 [35.8] 71.6 [97.1] 116.7 [158.2] 161.9 [219.5] 207.1
[280.8] 252.3 [342.1] 297.5 [403.4] 365.2 [495.1]
GP-480 32.5 [44.1] 94.0 [127.4] 155.5 [210.8] 217.0 [294.2] 278.5
[377.6] 340.0 [461.0] 401.5 [544.4] 493.7 [669.4]
GP-201- 14.7 [19.9] 38.5 [52.2] 62.3 [84.5] 86.1 [116.7] 109.9
[149.0] 133.7 [181.3] 157.5 [213.5] 193.2 [262.0]
GP-301- 23.3 [31.6] 66.8 [90.6] 110.2 [149.4] 153.7 [208.4] 197.1
[267.2] 240.5 [326.1] 284.0 [385.1] 327.4 [443.9]
GP-201- 19.2 [26.3] 50.1 [67.9] 81.1 [110.0] 112.0 [151.9] 142.9
[193.7] 173.8 [235.6] 204.7 [277.5] 251.1 [340.4]
GP-301- 26.2 [35.5] 75.1 [101.8] 124.0 [168.1] 172.9 [234.4]
221.7 [300.6] 270.6 [366.9] 319.5 [433.2] 392.8 [532.6]GP-120
[GPM-120] GP-121 [GPM-121] GP-220 [GPM-220] GP-221 [GPM-221] GP-
320 [GPM-320]GP-321 [GPM-321] GP-420 [GPM-420] GP-421 [GPM-421]
GP-621 [GPM-621]GP-130 [GPM-130] GP-131 [GPM-131] GP-230 [GPM-
230] GP-231 [GPM-231] GP-330 [GPM-330]GP
2
FLOW PASSAGE OPTIONS
346
8
GENERAL PURPOSE
Rotary Union Solutions
10 12
Series
Did You Know?
? DSTI Exports Rotary Union Products
to Over 45 Countries
About DSTI
Dynamic Sealing Technologies,
Inc. (DSTI) is a global leader
specializing in the design and
manufacturing of fl uid rotary
union (swivel joint) and electrical
slip ring products for a wide
range of industries.
Learn more at www.dsti.com
3 What is a Rotary Union?
4 GP Series Overview
5 How To Order
7 Specifi cations & Operating Information
8 Performance Data
13 GP 2 Passage Dimensions
15 GP 3 Passage Dimensions
17 GP 4 Passage Dimensions
19 GP 6 Passage Dimensions
20 GP 8 Passage Dimensions
21 GP 10 Passage Dimensions
22 GP 12 Passage Dimensions
23 Optional Equipment
25 Electrical Slip Ring Options
26 Installation & Mounting
2
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
GP SERIES
Rotary Union Solutions
Contents
A rotary union (or swivel joint) is a mechanism used
to transfer fl uid (under pressure or vacuum) from a
stationary inlet to a rotating outlet, preserving and
isolating the fl uid connection.
Rotary unions are engineered to endure a wide
range of temperatures and pressures for a variety of
conditions and environments. In addition, rotary unions
may integrate multiple passages and handle different
types of fl uid simultaneously.
See examples at www.dsti.com/industries
Housing
Bearings
Seals
Shaft
Retaining Ring
Flow Channel (Passage)
Housing Connections (x6)
Independent Flow Chann w Channels (x6)
(6 Passage Model Example)
How do I choose the best rotary union for
my application?
Tell us about your requirements so we can
make a recommendation:
1) Type of media(s) / fl uid(s) to be transferred
2) Number of independent fl ow channels (passages)
3) Operating pressure
4) Operating temperature
5) Operating speed
6) Shaft & housing connection type
7) Flow channel (passage) size
8) Torque & load requirements
9) Duty cycle*
*Does the temperature, speed or pressure fl uctuate
or change during operation? If so, please provide the
detailed ranges for each parameter and time durations
of each condition.
Flow Channel(Passage)
Shaft Connections (x6)
What is a Rotary Union?
3
phone 866.700.3784 | web www.dsti.com
GP Series Overview
+ General Purpose
+ NPT / BSPP / O-Ring Connection Options
+ Available in Stainless Steel
+ Exclusive DynaSeal? Seals
+ Reliable Usage With Dissimilar Medias
+ Customized Options
GP SERIES
Rotary Union Solutions
4
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
Download STEP, DWG, and PDF resources.
View interactive 3D models and more!
Learn more at www.dsti.com
ON THE WEB
How to Order: Create your Part Number
GP GP Series (NPT2 Connection)
1 1/8” (3.175 mm) Passage Size
2 1/4” (6.350 mm) Passage Size
3 3/8” (9.525 mm) Passage Size
5 3/4” (19.05 mm) Passage Size
6 1” (25.40 mm) Passage Size
4 1/2” (12.70 mm) Passage Size
2 2 Flow Passages
3 3 Flow Passages
4 4 Flow Passages
6 6 Flow Passages
1 With Thru-bore1
0 No Thru-bore1
GPM 2 2 1 OF ES12 C1 PMX
OPTIONS See Next Page
GPM GP Series (BSPP3 Connection)
GPS GP Series Stainless Steel (NPT2 Connection)
GPSM GP Series Stainless Steel (BSPP3 Connection)
EXAMPLE
EXAMPLES
GP-240
■ GP 4 Passage, 1/4” NPT Connections
GPM-341
■ GP 4 Passage with thru-bore, 3/8” BSPP Connections
GPSM-301-10
■ GP 10 Passage with thru-bore, 3/8” BSPP Connections
(Stainless Steel)
8 8 Flow Passages
01-10 10 Flow Passages
01-12 12 Flow Passages
NOTE Thru-bore standard
on all 10 and 12 fl ow
passage models
1 This digit not used in naming convention of 10 or 12 fl ow
passage models.
2 NPT with O-ring shaft connection.
3 O-ring not available for metric connections.
Shaft O-ring face seal connection standard on all GP
models excluding the 10 or 12 fl ow passage models
and BSPP models . For a shaft O-ring face seal
connection on a 10 or 12 passage model, please call
out the “OF” option when naming the part number.
phone 866.700.3784 | web www.dsti.com
5
6
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
GP SERIES
Rotary Union Solutions
ESTx 6 - 24 Circuits
600 Volts
Optional Electrical Slip Rings Optional Electrical Slip Rings
OF Add “- OF” for Shaft O-ring Face Seal Option1
Optional Electrical Slip Rings2
C1 Cover For ES and ESM Series Slip Rings
NOTE Only available
for GP-1x1 models
NOTE Not available
for GP-1x1 models
EXAMPLE
GP-241-EST6
GP 4 Passage model with thru-bore, 1/4” NPT
connections with a EST6 electrical slip ring.
OF
GPM-201-10
ESM36
C1
GP-241
EST6
ADAPTER
EXAMPLE
GPM-201-10-OF-ESM36-C1
GP 10 Passage with thru-bore, 1/4” BSPP
connections with a shaft O-Ring face seal
option and an ES6 electrical slip ring with cover.
GPM 2 2 1 OF ES12 C1
EXAMPLE
1 "-OF" option is only available on GP 10 & 12
passage models.
2 Pin connector and cord set options also
available. Please contact DSTI for more
information.
Omit “-OF” for all GP models except for GP 10 & 12 passage.
ES6A 6 Circuit, 120 Volts
ES12A 12 Circuit, 120 Volts
ESMx 9 - 52 Circuits
120/210 Volts
ESx 6 - 56 Circuits
210 Volts
ESEx
8 - 51 Circuits
240 Volts
Ethernet
ESETx
4 - 22 Circuits
600 Volts
Ethernet
(see Electrical Slip Ring Options on
page 25 for full specifi cations)
How to Order: Choose your Options
Media Types Coolant, Gases, Oil,
Steam1, Water1
Passage Sizes 1/8”, 1/4”, 3/8”, 1/2”, 3/4”, 1” (3.18 mm,
6.35 mm, 9.53 mm, 12.7 mm, 19.1 mm, 25.4 mm)
Connection Type NPT, BSPP, O-Ring
Max. Operating Pressure 7500 PSI (515 BAR)2
Max. Vacuum 30 HG2
Max. Rotational Speed 500 RPM2
Operating Temperature 0o F to 350o F (-18o C to 176o C)3
Body Material Type Carbon Steel, Stainless Steel
Platings and Coatings Black Oxide, Thin Dense Chrome
Slip Ring Options See page 25
Mounting Options Tapped holes on housing end / Slotted fl ange or
tapped holes at shaft end
Seal Type Filled PTFE (Alternative seal types available. Please
consult with DSTI)
Shaft
O-Ring Gland
1 Stainless Steel recommended for all water/steam applications.
2 values are dependent on a combination of all application
parameters. Please consult with DSTI.
3 High temperature applications may require alternative seal
materials. Please consult with DSTI.
Independent Flow Passages
Bearings
Seals
Bearings
Retaining Ring
Housing
7
phone 866.700.3784 | web www.dsti.com
Flow Passage Options 2 3 4 6 8 10 12
Specifications & Operating Information
Performance Data: Pressure
vs. Speed (Continuous)
GP-x2x Series
0
50
150
250
350
450
550
100
200
300
400
500
600
0 1000
(69 BAR)
2000
(138 BAR)
3000
(207 BAR)
4000
(276 BAR)
5000
(345 BAR)
6000
(414 BAR)
7500
(515 BAR)
PRESSURE PSI (BAR)
SPEED (RPM)
GP-120
GP-121, GP-220
GP-320
GP-221, GP-420
GP-321
GP-421
GP-621
GP-x3x Series
400
350
300
250
200
150
100
50
0
0 1000 (69 BAR)
2000
(138 BAR)
3000
(207 BAR)
4000
(276 BAR)
5000
(345 BAR)
6000
(414 BAR)
7500
(515 BAR)
PRESSURE PSI (BAR)
SPEED (RPM)
GP-130
GP-131
GP-230
GP-231, GP-330
GP-331, GP-430
GP-431, GP-530
GP-630
* This data is to be used as
a general guideline. Data
based on hydraulic fl uid
as the media type. Please
consult DSTI about your
specifi c application.
* This data is to be used as
a general guideline. Data
based on hydraulic fl uid
as the media type. Please
consult DSTI about your
specifi c application.
8
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
GP SERIES
Rotary Union Solutions
GP-x4x Series
400
350
300
250
200
150
100
50
0
0 1000 (69 BAR)
2000
(138 BAR)
3000
(207 BAR)
4000
(276 BAR)
5000
(345 BAR)
6000
(414 BAR)
7500
(515 BAR)
PRESSURE PSI (BAR)
SPEED (RPM)
GP-140
GP-141
GP-240
GP-241, GP-340
GP-341, GP-440
GP-441, GP-540
GP-641
GP-x6x Series
300
250
200
150
100
50
0
0 1000 (69 BAR)
2000
(138 BAR)
3000
(207 BAR)
4000
(276 BAR)
5000
(345 BAR)
6000
(414 BAR)
7500
(515 BAR)
PRESSURE PSI (BAR)
SPEED (RPM)
GP-161
GP-261
GP-361
GP-460
GP-561
* This data is to be used as
a general guideline. Data
based on hydraulic fl uid
as the media type. Please
consult DSTI about your
specifi c application.
* This data is to be used as
a general guideline. Data
based on hydraulic fl uid
as the media type. Please
consult DSTI about your
specifi c application.
9
phone 866.700.3784 | web www.dsti.com
10
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
GP SERIES
Rotary Union Solutions
GP-x8x Series
300
250
200
150
100
50
0
0 1000 (69 BAR)
2000
(138 BAR)
3000
(207 BAR)
4000
(276 BAR)
5000
(345 BAR)
6000
(414 BAR)
7500
(515 BAR)
PRESSURE PSI (BAR)
SPEED (RPM)
GP-180
GP-280
GP-380
GP-480
GP-201-xx / GP-301-xx Series
300
250
200
150
100
50
0
0 1000 (69 BAR)
2000
(138 BAR)
3000
(207 BAR)
4000
(276 BAR)
5000
(345 BAR)
6000
(414 BAR)
7500
(515 BAR)
PRESSURE PSI (BAR)
SPEED (RPM)
GP-201-10
GP-301-10,
GP-301-12
GP-201-12
* This data is to be used as
a general guideline. Data
based on hydraulic fl uid
as the media type. Please
consult DSTI about your
specifi c application.
* This data is to be used as
a general guideline. Data
based on hydraulic fl uid
as the media type. Please
consult DSTI about your
specifi c application.
Performance Data: Pressure vs. Speed (Continuous)
11
phone 866.700.3784 | web www.dsti.com
* This data is to be used as a general guideline. Please consult
DSTI about your specifi c application.
Torque data based on all passages (ports) pressurized.
MODEL 0 1000
(69 BAR)
2000
(138 BAR)
3000
(207 BAR)
4000
(276 BAR)
5000
(345 BAR)
6000
(414 BAR)
7500
(515 BAR)
GP-120 0.5 [0.7] 1.3 [1.8] 2.1 [2.8] 2.8 [3.8] 3.6 [4.9] 4.3
[5.8] 5.1 [6.9] 6.3 [8.5]
GP-121 1.9 [2.6] 3.7 [5.0] 5.4 [7.3] 7.1 [9.6] 8.8 [11.9] 10.5
[14.2] 12.3 [16.7] 14.9 [20.2]
GP-220 3.9 [5.3] 7.3 [9.9] 10.7 [14.5] 14.2 [19.3] 17.6 [23.9]
21.1 [28.6] 24.5 [33.2] 29.7 [40.3]
GP-221 5.7 [7.7] 11.8 [16.0] 17.9 [24.3] 24.1 [32.7] 30.2 [40.9]
36.3 [49.2] 42.5 [57.6] 51.6 [70.0]
GP-320 4.0 [5.4] 8.7 [11.8] 13.4 [18.2] 18.0 [24.4] 22.7 [30.8]
27.4 [37.1] 32.1 [43.5] 39.2 [53.1]
GP-321 7.1 [9.6] 21.6 [29.3] 36.1 [48.9] 50.6 [68.6] 65.1 [88.3]
79.5 [107.8] 94.1 [127.6] 115.7 [156.9]
GP-420 5.7 [7.7] 11.8 [16.0] 17.9 [24.3] 24.1 [32.7] 30.2 [40.9]
36.3 [49.2] 42.5 [57.6] 51.6 [70.0]
GP-421 12.2 [16.5] 33.0 [44.7] 53.9 [73.1] 74.7 [101.3] 95.6
[129.6] 116.4 [157.8] 137.3 [186.2] 168.6 [228.6]
GP-621 24.4 [33.1] 71.3 [96.7] 118.2 [160.3] 165.2 [223.0] 212.1
[287.6] 259.0 [351.2] 305.9 [414.7] 376.3 [510.2]
GP-130 1.5 [2.0] 3.1 [4.2] 4.7 [6.4] 6.3 [8.5] 7.9 [10.7] 9.5
[12.9] 11.1 [15.0] 13.5 [18.3]
GP-131 2.6 [3.5] 4.9 [6.6] 7.2 [9.8] 9.5 [12.9] 11.8 [16.0] 14.1
[19.1] 16.4 [22.2] 19.8 [26.8]
GP-230 5.3 [7.2] 11.6 [15.7] 17.8 [24.1] 24.1 [32.7] 30.3 [41.1]
36.6 [49.6] 42.8 [58.0] 52.2 [70.8]
GP-231 7.6 [10.3] 15.8 [21.4] 23.9 [32.4] 32.1 [43.5] 40.3 [54.6]
48.4 [65.6] 56.6 [76.7] 68.9 [93.4]
GP-330 7.6 [10.3] 15.8 [21.4] 23.9 [32.4] 32.1 [43.5] 40.3 [54.6]
48.4 [65.6] 56.6 [76.7] 68.9 [93.4]
GP-331 9.5 [12.9] 28.8 [39.0] 48.1 [65.4] 67.4 [91.4] 86.7
[117.4] 106.0 [143.7] 125.4 [170.0] 154.3 [209.2]
GP-430 9.5 [12.9] 28.8 [39.0] 48.1 [65.4] 67.4 [91.4] 86.7
[117.4] 106.0 [143.7] 125.4 [170.0] 154.3 [209.2]
GP-431 16.2 [21.3] 44.0 [59.7] 71.8 [97.3] 99.6 [135.0] 127.4
[172.7] 155.2 [210.4] 183.1 [248.3] 224.8 [304.8]
GP-530 16.2 [21.3] 44.0 [59.7] 71.8 [97.3] 99.6 [135.0] 127.4
[172.7] 155.2 [210.4] 183.1 [248.3] 224.8 [304.8]
GP-630 24.7 [33.5] 74.2 [100.6] 123.6 [167.6] 173.0 [234.6] 222.5
[301.7] 271.9 [368.6] 321.3 [435.6] 395.5 [536.2]
GP-140 1.9 [2.6] 3.9 [5.3] 5.9 [8.0] 7.9 [10.7] 9.9 [13.4] 11.9
[16.1] 13.9 [18.8] 16.9 [22.9]
GP-141 3.2 [4.3] 6.1 [8.27] 9.0 [12.2] 11.8 [16.0] 14.7 [19.9]
17.6 [23.9] 20.4 [27.7] 24.8 [33.6]
GP-240 6.6 [8.9] 14.4 [19.5] 22.3 [30.2] 30.1 [40.8] 37.9 [51.4]
45.7 [62.0] 53.5 [72.5] 65.3 [88.5]
GP-241 9.5 [12.9] 19.7 [26.7] 29.9 [40.5] 40.1 [54.4] 50.3 [68.2]
60.5 [82.0] 70.8 [96.0] 86.1 [116.7]
GP-340 9.5 [12.9] 19.7 [26.7] 29.9 [40.5] 40.1 [54.4] 50.3 [68.2]
60.5 [82.0] 70.8 [96.0] 86.1 [116.7]
GP-341 11.9 [16.1] 36.0 [48.8] 60.2 [81.6] 84.3 [114.3] 108.4
[147.0] 132.6 [179.8] 156.7 [212.5] 192.9 [261.5]
GP-440 11.9 [16.1] 36.0 [48.8] 60.2 [81.6] 84.3 [114.3] 108.4
[147.0] 132.6 [179.8] 156.7 [212.5] 192.9 [261.5]
GP-441 20.3 [27.5] 55.0 [74.6] 89.8 [121.8] 124.6 [168.9] 159.3
[216.0] 194.1 [263.2] 228.8 [310.2] 280.9 [380.8]
GP-540 20.3 [27.5] 55.0 [74.6] 89.8 [121.8] 124.6 [168.9] 159.3
[216.0] 194.1 [263.2] 228.8 [310.2] 280.9 [380.8]
GP-641 40.7 [55.2] 118.9 [161.2] 197.1 [267.2] 275.3 [373.3]
353.5 [479.3] 431.7 [585.3] 509.9 [691.3] 627.1 [850.2]
PRESSURE PSI (BAR)
PRESSURIZED TORQUE ( POUND FOOT [NEWTON METER] )
Performance Data: Pressure vs. Torque
Performance Data: Pressure
vs. Torque
12
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
GP SERIES
Rotary Union Solutions
* This data is to be used as a general guideline. Please consult
DSTI about your specifi c application.
Torque data based on all passages (ports) pressurized.
MODEL 0 1000
(69 BAR)
2000
(138 BAR)
3000
(207 BAR)
4000
(276 BAR)
5000
(345 BAR)
6000
(414 BAR)
7500
(515 BAR)
GP-161 6.0 [8.13] 13.0 [17.6] 20.0 [27.1] 27.1 [36.7] 34.1 [46.2]
41.1 [55.7] 48.2 [65.4] 58.7 [79.6]
GP-261 9.8 [13.3] 31.3 [42.4] 52.8 [71.6] 74.3 [100.7] 95.8
[129.9] 117.3 [159.0] 138.8 [188.2] 171.0 [231.8]
GP-361 13.1 [17.8] 39.6 [53.7] 66.2 [89.8] 92.7 [125.7] 119.3
[161.7] 145.8 [197.7] 172.4 [233.7] 212.2 [287.7]
GP-460 22.3 [30.2] 60.5 [82.0] 98.8 [134.0] 137.0 [185.7] 175.2
[237.5] 213.5 [289.5] 251.7 [341.3] 309.0 [418.9]
GP-561 43.3 [58.7] 129.8 [176.0] 216.3 [293.3] 302.8 [410.5]
389.3 [527.8] 475.8 [645.1] 562.3 [762.4] 692.0 [938.2]
GP-180 10.4 [14.1] 21.7 [29.4] 32.9 [44.6] 44.1 [59.8] 55.4
[75.1] 66.6 [90.3] 77.8 [105.5] 94.7 [128.4]
GP-280 15.4 [20.9] 46.8 [63.5] 78.2 [106.0] 109.6 [148.6] 140.9
[191.0] 172.3 [233.6] 203.7 [276.2] 250.8 [340.0]
GP-380 26.4 [35.8] 71.6 [97.1] 116.7 [158.2] 161.9 [219.5] 207.1
[280.8] 252.3 [342.1] 297.5 [403.4] 365.2 [495.1]
GP-480 32.5 [44.1] 94.0 [127.4] 155.5 [210.8] 217.0 [294.2] 278.5
[377.6] 340.0 [461.0] 401.5 [544.4] 493.7 [669.4]
GP-201- 14.7 [19.9] 38.5 [52.2] 62.3 [84.5] 86.1 [116.7] 109.9
[149.0] 133.7 [181.3] 157.5 [213.5] 193.2 [262.0]
GP-301- 23.3 [31.6] 66.8 [90.6] 110.2 [149.4] 153.7 [208.4] 197.1
[267.2] 240.5 [326.1] 284.0 [385.1] 327.4 [443.9]
GP-201- 19.2 [26.3] 50.1 [67.9] 81.1 [110.0] 112.0 [151.9] 142.9
[193.7] 173.8 [235.6] 204.7 [277.5] 251.1 [340.4]
GP-301- 26.2 [35.5] 75.1 [101.8] 124.0 [168.1] 172.9 [234.4]
221.7 [300.6] 270.6 [366.9] 319.5 [433.2] 392.8 [532.6]
PRESSURE PSI (BAR)
PRESSURIZED TORQUE
( POUND FOOT [NEWTON METER] )
GP 2 Flow Passage: Dimensions
GP-120 [GPM-120] GP-121 [GPM-121] GP-220 [GPM-220] GP-221 [GPM-
221] GP-320 [GPM-320]
A 0.281” [7.14mm] 0.281” [7.14mm] 0.281” [7.14mm] 0.344”
[9.00mm] 0.281” [7.14mm]
B 2.937” [74.60mm] 2.937” [74.60mm] 2.937” [74.60mm] 3.750”
[95.25mm] 3.187” [80.95mm]
C 2.500” [63.50mm] 2.500” [63.50mm] 2.500” [63.50mm] 3.250”
[82.55mm] 2.750” [69.85mm]
D 2.687” [68.25mm] 2.750” [69.85mm] 2.687” [68.25mm] 3.437”
[87.30mm] 2.937” [74.60mm]
E 2-014 O-Ring [12.42mm] 2-015 O-Ring [14.00mm] 2-017 O-Ring
[17.17mm] 2-017 O-Ring [17.17mm] 2-019 O-Ring [20.35mm]
F 0.250” [6.4mm] 0.160” [4.0mm] 0.250” [6.4mm] 0.250” [6.4mm]
0.380” [9.5mm]
G 1.000” [25.40mm] 1.312” [33.32mm] 1.000” [25.40mm] 1.750”
[44.45mm] 1.187” [30.15mm]
H N/A 0.500” [12.70mm] N/A 0.750” [19.05mm] N/A
I 3.35” [85.0mm] 3.64” [92.4mm] 4.37” [111.1mm] 4.77”
[121.2mm] 4.71” [119.5mm]
J 1.83” [46.5mm] 2.03” [51.6mm] 2.26” [57.5mm] 2.50” [63.6mm]
2.36” [60.0mm]
K 0.88” [22.2mm] 1.00” [25.4mm] 1.00” [25.4mm] 1.12” [28.5mm]
1.00” [25.4mm]
L 0.250” [6.35mm] 0.250” [6.35mm] 0.250” [6.35mm] 0.312”
[7.92mm] 0.250” [6.35mm]
M 2.000” [50.80mm] 2.187” [55.55mm] 2.000” [50.80mm] 2.750”
[69.85mm] 2.375” [60.33mm]
N 0.125” [3.18mm] 0.125” [3.18mm] 0.125” [3.18mm] 0.125”
[3.18mm] 0.125” [3.18mm]
O 1.54” [39.12mm] 1.81” [45.97mm] 1.94” [49.27mm] 2.50”
[63.50mm] 2.25” [57.15mm]
P 1/4”-18 NPT
[G1/4”-19 BSPP]
1/8”-27 NPT
[G1/8”-28 BSPP]
1/4”-18 NPT
[G1/4”-19 BSPP]
1/4”-18 NPT
[G1/4”-19 BSPP]
3/8”-18 NPT
[G3/8”-19 BSPP]
Q 0.828” [21.03mm] 0.549” [13.94mm] 0.828” [21.03mm] 0.828”
[21.03mm] 0.950” [24.13mm]
R N/A 0.730” [18.54mm] N/A 1.374” [34.90mm] N/A
S N/A #4-40 [M3x0.5] N/A #10-24 [M5x0.8] N/A
T 1/4”-20 [M6x1.0] 1/4”-20 [M6x1.0] 1/4”-20 [M6x1.0] 5/16”-18
[M8x1.25] 1/4”-20 [M6x1.0]
13
phone 866.700.3784 | web www.dsti.com
R
S
? b.c.
45.00o
B
(3x)
T(4x)
22.50o
I
J
K
L Q
M
N
O ball bearings seals weep ports
P
(4x)
G
A
E
F to
B
H ?C b.c.
?
?
?C
?
?
?
?
b.c.
b.c.
thru
(2x)
depth
? D b.c.
GP 2 Flow Passage: Dimensions
GP-321 [GPM-321] GP-420 [GPM-420] GP-421 [GPM-421] GP-621 [GPM-
621]
A 0.344” [9.00mm] 0.344” [9.00mm] 0.344” [9.00mm] 0.531”
[13.49mm]
B 4.187” [106.35mm] 3.875” [98.43mm] 4.937” [125.40mm] 7.187”
[182.55mm]
C 3.500” [88.90mm] 3.188” [80.98mm] 4.125” [104.78mm] 6.250”
[158.75mm]
D 3.875” [98.43mm] 3.500” [88.90mm] 4.625” [117.48mm] 6.750”
[171.45mm]
E 2-019 O-Ring [20.35mm] 2-023 O-Ring [26.70mm] 2-023 O-Ring
[26.70mm] 2-128 O-Ring [37.77mm]
F 0.375” [9.53mm] 0.500” [12.70mm] 0.500” [12.70mm] 1.000”
[25.40mm]
G 1.875” [47.63mm] 1.437” [36.50mm] 2.250” [57.15mm] 3.000”
[76.20mm]
H 0.750” [19.05mm] N/A 0.750” [19.05mm] 1.000” [25.40mm]
I 5.31” [134.9mm] 5.39” [137.0mm] 6.16” [156.4mm] 8.60”
[218.4mm]
J 2.65” [67.2mm] 2.71” [68.7mm] 3.15” [79.9mm] 4.37” [111.1mm]
K 1.12” [28.5mm] 1.19” [30.1mm] 1.63” [41.3mm] 1.63” [41.3mm]
L 0.312” [7.92mm] 0.312” [7.92mm] 0.375” [9.53mm] 0.625”
[15.88mm]
M 3.000” [76.20mm] 2.750” [69.85mm] 3.625” [92.08mm] 5.000”
[127.00mm]
N 0.125” [3.18mm] 0.125” [3.18mm] 0.187” [4.75mm] 0.187”
[4.75mm]
O 2.84” [3.18mm] 2.58” [65.53mm] 3.50” [88.90mm] 5.25”
[133.35mm]
P 3/8”-18 NPT
[G3/8”-19 BSPP]
1/2”-14 NPT
[G1/2”-14 BSPP]
1/2”-14 NPT
[G1/2”-14 BSPP]
1”-11.5 NPT
[G1”-11 BSPP]
Q 1.030” [26.16mm] 1.106” [28.09mm] 1.186” [30.12mm] 1.794”
[45.57mm]
R 1.374” [34.90mm] N/A 1.374” [34.90mm] 1.374” [34.90mm]
S #10-24 [M5x0.8] N/A #10-24 [M5x0.8] #10-24 [M5x0.8]
T 5/16”-18 [M8x1.25] 5/16”-18 [M8x1.25] 5/16”-18 [M8x1.25] 1/2
”-13 [M12x1.75]
14
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
GP SERIES
Rotary Union Solutions
R
S
? b.c.
45.00o
B
(3x)
T(4x)
22.50o
I
J
K
L Q
M
N
O ball bearings seals weep ports
P
(4x)
G
A
E
F to
B
H ?C b.c.
?
?
?C
?
?
?
?
b.c.
b.c.
thru
(2x)
depth
? D b.c.
GP 3 Flow Passage: Dimensions
GP-130 [GPM-130] GP-131 [GPM-131] GP-230 [GPM-230] GP-231 [GPM-
231] GP-330 [GPM-330]
A 0.281” [7.14mm] 0.281” [7.14mm] 0.281” [7.14mm] 0.344”
[9.00mm] 0.344” [9.00mm]
B 2.688” [68.28mm] 2.937” [74.60mm] 3.187” [80.95mm] 3.750”
[95.25mm] 3.875” [98.43mm]
C 2.125” [53.98mm] 2.375” [60.33mm] 2.750” [69.85mm] 3.250”
[82.55mm] 3.250” [82.55mm]
D 2.500” [63.50mm] 2.750” [69.85mm] 2.937” [74.60mm] 3.437”
[87.30mm] 3.562” [90.47mm]
E 2-015 O-Ring [14.00mm] 2-015 O-Ring [14.00mm] 2-017 O-Ring
[17.17mm] 2-017 O-Ring [17.17mm] 2-019 O-Ring [20.35mm]
F .156” [3.96mm] .156” [3.96mm] .250” [6.40mm] .250” [6.40mm]
.375” [9.53mm]
G 1.000” [25.40mm] 1.312” [33.32mm] 1.250” [31.75mm] 1.750”
[44.45mm] 1.375” [34.93mm]
H N/A 0.500” [12.70mm] N/A 0.750” [19.05mm] N/A
I 4.15” [105.3mm] 4.19” [106.3mm] 5.29” [134.4mm] 5.60”
[142.3mm] 6.03” [153.2mm]
J 1.99” [50.6mm] 2.03” [51.6mm] 2.30” [58.4mm] 2.50” [63.6mm]
2.63” [66.8mm]
K 1.00” [25.4mm] 1.00” [25.4mm] 1.00” [25.4mm] 1.12” [28.5mm]
1.19” [30.1mm]
L 0.250” [6.35mm] 0.250” [6.35mm] 0.250” [6.35mm] 0.312”
[7.92mm] 0.312” [7.92mm]
M 1.875” [47.63mm] 2.187” [55.55mm] 2.375” [60.33mm] 2.750”
[69.85mm] 2.625” [66.68mm]
N 0.125” [3.18mm] 0.125” [3.18mm] 0.125” [3.18mm] 0.125”
[3.18mm] 0.125” [3.18mm]
O 1.75” [44.5mm] 1.81” [46.0mm] 2.25” [57.2mm] 2.50” [63.5mm]
2.576” [65.4mm]
P 1/8”-27 NPT
[G1/8”-28 BSPP]
1/8”-27 NPT
[G1/8”-28 BSPP]
1/4”-18 NPT
[G1/4”-19 BSPP]
1/4”-18 NPT
[G1/4”-19 BSPP]
3/8”-18 NPT
[G3/8”-19 BSPP]
Q 0.549” [13.94mm] 0.549” [13.94mm] 0.828” [21.03mm] 0.828”
[21.03mm] 0.950” [24.13mm]
R N/A 0.730” [18.54mm] N/A 1.374” [34.90mm] N/A
S N/A #4-40 [M3x0.5] N/A #10-24 [M5x0.8] N/A
T 1/4”-20 [M6x1.0] 1/4”-20 [M6x1.0] 1/4”-20 [M6x1.0] 5/16”-18
[M8x1.25] 5/16”-18 [M8x1.25]
15
phone 866.700.3784 | web www.dsti.com
R
S
?
?
b.c.
b.c.
45.00o
? B
(3x)
T(4x)
C
22.50o
I
J
K
L Q
M
N
O
P
?
A
E (3x)
?B
(4x)
?H
thru
C C
D
? ?
?
b.c. b.c.
b.c. ? F to
depth
ball bearings seals weep ports
GP 3 Flow Passage: Dimensions
GP-331 [GPM-331] GP-430 [GPM-430] GP-431 [GPM-431] GP-530 [GPM-
530] GP-630 [GPM-630]
A 0.343” [8.71mm] 0.343” [8.71mm] 0.343” [8.71mm] 0.406”
[11.00mm] 0.531” [13.49mm]
B 4.187” [106.35mm] 4.250” [107.95mm] 4.937” [125.40mm] 5.187”
[131.75mm] 6.937” [176.20mm]
C 3.625” [92.08mm] 3.625” [92.08mm] 4.125” [104.78mm] 4.500”
[114.30mm] 5.750” [146.05mm]
D 3.875” [98.43mm] 3.937” [100.00mm] 4.625” [117.48mm] 4.812”
[122.22mm] 6.500” [165.10mm]
E 2-019 O-Ring [20.35mm] 2-023 O-Ring [26.70mm] 2-023 O-Ring
[26.70mm] 2-026 O-Ring [31.47mm] 2-128 O-Ring [37.77mm]
F 0.375” [9.53mm] 0.500” [12.70mm] 0.500” [12.70mm] 0.750”
[19.05mm] 1.000” [25.40mm]
G 1.875” [47.63mm] 1.750” [44.45mm] 2.250” [57.15mm] 2.125”
[53.98mm] 2.625” [53.98mm]
H 0.750” [19.05mm] N/A 0.750” [19.05mm] N/A N/A 442-
1327836 LOCTITE NDBK HI/IM WC 25LB M/L
156-500508-047/CAT NO MTI-3150E4TPXX 美国chromalox
A8245-9215KME A4904-9215KME VEXTA
S42024-L5583-A1 4 X GE/T TNX:A4B0000011267
S42024-L5495-A1 8 X FE/L2 TNX:A4B0000008828
S42024-L5585-A1-5 CC + STM 16|4|1 (Switch fabric Prot
33G/10G, STM 16/4/1) TNX:A4B00000011266
S42024-L5561-A1-6 SCE PLUS TNX:A4B0000011265
TNX: A4B0000011264 Siemens SDH Core HIT 7035 ADM-16/-4/-
1config. w/o Prot., >=R4.4
S42024-L5294-A1-9 System controller card for NSN SDH HIT
7060 HC Node
施耐德 ISH100/30058/0/0/00/0/00/01/00
GE 5GE752RB3B
意大利ABAC空压机 型号B7000
品牌SC气动泵 10-600w020L 35:1
飞机耳机 H-143/AIC
GE/752/FF/HT/SH/B/1S
I 6.34” [161.1mm] 7.06” [179.3mm] 7.41” [188.1mm] 8.28”
[210.2mm] 10.57” [268.4mm]
J 2.65” [67.2mm] 2.97” [75.5mm] 3.21” [81.5mm] 3.39” [86.1mm]
4.53” [115.1mm]
K 1.12” [28.5mm] 1.38” [34.9mm] 1.639” [42.8mm] 1.50” [38.1mm]
2.25” [57.2mm]
L 0.312” [7.92mm] 0.375” [9.53mm] 0.437” [11.10mm] 0.500”
[11.10mm] 0.625” [15.88mm]
M 3.000” [76.20mm] 3.125” [79.38mm] 3.625” [92.08mm] 3.750”
[95.25mm] 4.625” [117.48mm]
N 0.125” [3.18mm] 0.187” [4.75mm] 0.187” [4.75mm] 0.187”
[4.75mm] 0.187” [4.75mm]
O 2.57” [65.4mm] 2.92” [74.2mm] 3.50” [89.0mm] 3.45” [87.6mm]
5.00” [127.0mm]
P 3/8”-18 NPT
[G3/8”-19 BSPP]
1/2”-14 NPT
[G1/2”-14 BSPP]
1/2”-14 NPT
[G1/2”-14 BSPP]
1/2”-14 NPT
[G1/2”-14 BSPP]
1”-11.5 NPT
[G1”-11 BSPP]
Q 1.030” [26.16mm] 1.186” [30.12mm] 1.186” [30.12mm] 1.186”
[30.12mm] 1.794” [45.57mm]
R 1.375” [34.93mm] N/A 1.375” [34.93mm] N/A N/A
S #10-24 [M5x0.8] N/A #10-24 [M5x0.8] N/A N/A
T 5/16”-18 [M8x1.25] 5/16”-18 [M8x1.25] 5/16”-18 [M8x1.25] 5/16
”-18 [M8x1.25] 1/2”-13 [M12x1.75]
16
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
GP SERIES
Rotary Union Solutions
R
S
?
? 442-1327836 LOCTITE NDBK HI/IM WC 25LB M/L
156-500508-047/CAT NO MTI-3150E4TPXX 美国chromalox
A8245-9215KME A4904-9215KME VEXTA
S42024-L5583-A1 4 X GE/T TNX:A4B0000011267
S42024-L5495-A1 8 X FE/L2 TNX:A4B0000008828
S42024-L5585-A1-5 CC + STM 16|4|1 (Switch fabric Prot
33G/10G, STM 16/4/1) TNX:A4B00000011266
S42024-L5561-A1-6 SCE PLUS TNX:A4B0000011265
TNX: A4B0000011264 Siemens SDH Core HIT 7035 ADM-16/-4/-
1config. w/o Prot., >=R4.4
S42024-L5294-A1-9 System controller card for NSN SDH HIT
7060 HC Node
施耐德 ISH100/30058/0/0/00/0/00/01/00
GE 5GE752RB3B
意大利ABAC空压机 型号B7000
品牌SC气动泵 10-600w020L 35:1
飞机耳机 H-143/AIC
GE/752/FF/HT/SH/B/1S
b.c.
b.c.
45.00o
? B
(3x)
T(4x)
C
22.50o
I
J
K
L Q
M
N
O
P
?
A
E (3x)
?B
(4x)
?H
thru
C C
D
? ?
?
b.c. b.c.
b.c. ? F to
depth
ball bearings seals weep ports
GP 4 Flow Passage: Dimensions
GP-140 [GPM-140] GP-141 [GPM-141] GP-240 [GPM-240] GP-241 [GPM-
241] GP-340 [GPM-340]
A 0.281” [7.14mm] 0.281” [7.14mm] 0.281” [7.14mm] 0.344”
[8.74mm] 0.344” 8.74mm]
B 2.687” [68.24mm] 2.937” [74.60mm] 3.187” [80.95mm] 3.750”
[95.25mm] 3.875” [98.43mm]
C 2.125” [53.98mm] 2.375” [60.33mm] 2.750” [69.85mm] 3.250”
[82.55mm] 3.250” [82.55mm]
D 2.500” [63.50mm] 2.750” [69.85mm] 2.937” [74.60mm] 3.437”
[87.30mm] 3.562” [90.47mm]
E 2-015 O-Ring [14.00mm] 2-015 O-Ring [14.00mm] 2-017 O-Ring
[17.17mm] 2-017 O-Ring [17.17mm] 2-019 O-Ring [20.35mm]
F 0.156” [3.96mm] 0.160” [4.00mm] 0.250” [6.40mm] 0.250”
[6.40mm] 0.380” [9.65mm]
G 1.062” [26.97mm] 1.312” [33.32mm] 1.375” [34.93mm] 1.750”
[44.45mm] 1.500” [38.10mm]
H N/A 0.500” [12.70mm] N/A 0.750” [19.05mm] N/A
I 4.70” [119.3mm] 4.74” [120.3mm] 6.12” [155.4mm] 6.33”
[160.7mm] 6.98” [177.3mm]
J 1.99” [50.6mm] 2.03” [51.6mm] 2.30” [58.4mm] 2.50” [63.6mm]
2.63” [66.8mm]
K 1.00” [25.4mm] 1.00” [25.4mm] 1.00” [25.4mm] 1.12” [28.5mm]
1.19” [30.1mm]
L 0.250” [6.35mm] 0.250” [6.35mm] 0.250” [6.35mm] 0.312”
[7.92mm] 0.312” [7.92mm]
M 1.875” [47.63mm] 2.187” [55.55mm] 2.375” [60.33mm] 2.750”
[69.85mm] 2.625” [66.68mm]
N 0.125” [3.18mm] 0.125” [3.18mm] 0.125” [3.18mm] 0.125”
[3.18mm] 0.125” [3.18mm]
O 1.750” [44.45mm] 1.810” [46.00mm] 2.20” [55.9mm] 2.50”
[63.5mm] 2.58” [65.4mm]
P 1/8”-27 NPT
[G1/8”-28 BSPP]
1/8”-27 NPT
[G1/8”-28 BSPP]
1/4”-18 NPT
[G1/4”-19 BSPP]
1/4”-18 NPT
[G1/4”-19 BSPP]
3/8”-18 NPT
[G3/8”-19 BSPP]
Q 0.549” [13.94mm] 0.549” [13.94mm] 0.828” [21.03mm] 0.828”
[21.03mm] 0.950” [24.13mm]
R N/A 0.730” [18.54mm] N/A 1.374” [34.90mm] N/A
S N/A #4-40 [M3x0.5] N/A #10-24 [M5x0.8] N/A
T 1/4”-20 [M6x1.0] 1/4”-20 [M6x1.0] 1/4”-20 [M6x1.0] 5/16”-18
[M8x1.25] 5/16”-18 [M8x1.25]
17
phone 866.700.3784 | web www.dsti.com
S ? b.c.
45.00o
?B
(3x)
T (4x)
C
22.50o
A
E (4x)
? C b.c.
? B
(4x)
? D b.c. ? F to
depth
? G b.c.
?H
thru
I
J
K
L Q
M
N
O
P
? ball bearings seals weep ports
?R b.c.
GP 4 Flow Passage: Dimensions
GP-341 [GPM-341] GP-440 [GPM-440] GP-441 [GPM-441] GP-540 [GPM-
540] GP-641 [GPM-641]
A 0.343” [8.71mm] 0.343” [8.71mm] 0.343” [8.71mm] 0.406”
[11.00mm] 0.531” [13.49mm]
B 4.187” [106.35mm] 4.250” [107.95mm] 4.937” [125.40mm] 5.187”
[131.75mm] 7.187” [182.55mm]
C 3.625” [92.08mm] 3.625” [92.08mm] 4.125” [104.78mm] 4.500”
[114.30mm] 6.000” [152.40mm]
D 3.875” [98.43mm] 3.937” [100.00mm] 4.625” [117.48mm] 4.812”
[122.22mm] 6.750” [165.10mm]
E 2-019 O-Ring [20.35mm] 2-023 O-Ring [26.70mm] 2-023 O-Ring
[26.70mm] 2-026 O-Ring [31.47mm] 2-128 O-Ring [37.77mm]
F 0.375” [9.53mm] 0.500” [12.70mm] 0.500” [12.70mm] 0.750”
[19.05mm] 1.000” [25.40mm]
G 1.875” [47.63mm] 1.750” [44.45mm] 2.250” [57.15mm] 2.125”
[53.98mm] 3.000” [76.20mm]
H 0.750” [19.05mm] N/A 0.750” [19.05mm] N/A 1.000” [25.40mm]
I 7.37” [187.2mm] 8.25” [209.5mm] 8.59” [218.2mm] 9.73”
[247.1mm] 12.19” [268.4mm]
J 2.65” [67.2mm] 2.97” [75.5mm] 3.21” [81.5mm] 3.39” [86.1mm]
4.37” [111.1mm]
K 1.12” [28.5mm] 1.38” [34.9mm] 1.64” [42.8mm] 1.50” [38.1mm]
2.25” [57.2mm]
L 0.312” [7.92mm] 0.375” [9.53mm] 0.437” [11.10mm] 0.500”
[11.10mm] 0.625” [15.88mm]
M 3.000” [76.20mm] 3.125” [79.38mm] 3.625” [92.08mm] 3.750”
[95.25mm] 5.000” [117.48mm]
N 0.125” [3.18mm] 0.187” [4.75mm] 0.187” [4.75mm] 0.187”
[4.75mm] 0.187” [4.75mm]
O 2.84” [72.1mm] 2.92” [74.2mm] 3.50” [89.00mm] 3.45”
[87.60mm] 5.25” [133.4mm]
P 3/8”-18 NPT
[G3/8”-19 BSPP]
1/2”-14 NPT
[G1/2”-14 BSPP]
1/2”-14 NPT
[G1/2”-14 BSPP]
3/4”-14 NPT
[G3/4”-14 BSPP]
1”-11.5 NPT
[G1”-11 BSPP]
Q 1.030” [26.16mm] 1.186” [30.12mm] 1.186” [30.12mm] 1.454”
[36.93mm] 1.794” [45.57mm]
R 1.375” [34.93mm] N/A 1.375” [34.93mm] N/A 1.375” [34.93mm]
S #10-24 [M5x0.8] N/A #10-24 [M5x0.8] N/A #10-24 [M5x0.8]
T 5/16”-18 [M8x1.25] 5/16”-18 [M8x1.25] 5/16”-18 [M8x1.25] 5/16
”-18 [M8x1.25] 1/2”-13 [M12x1.75]
18
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
GP SERIES
Rotary Union Solutions
S ? b.c.
45.00o
?B
(3x)
T (4x)
C
22.50o
A
E (4x)
? C b.c.
? B
(4x)
? D b.c. ? F to
depth
? G b.c.
?H
thru
I
J
K
L Q
M
N
O
P
? ball bearings seals weep ports
?R b.c.
GP 6 Flow Passage: Dimensions
GP-161 [GPM-161] GP-261 [GPM-261] GP-361 [GPM-361] GP-460 [GPM-
460] GP-561 [GPM-561]
A 0.281” [7.14mm] 0.344” [9.00mm] 0.344” [9.00mm] 0.344”
[9.00mm] 0.406” [11.00mm]
B 3.187” [80.95mm] 4.000” [101.6mm] 4.250” [107.95mm] 4.937”
[125.40mm] 6.437” [163.50mm]
C 2.625” [66.68mm] 3.375” [85.73mm] 3.625” [92.08mm] 4.125”
[104.78mm] 5.625” [142.88mm]
D 3.000” [76.20mm] 3.625” [92.08mm] 3.937” [100.00mm] 4.625”
[117.48mm] 6.000” [152.40mm]
E 2-015 O-Ring [14.00mm] 2-017 O-Ring [17.17mm] 2-019 O-Ring
[20.35mm] 2-023 O-Ring [26.70mm] 2-026 O-Ring [31.47mm]
F 1.562” [39.67mm] 1.875” [33.32mm] 2.125” [53.98mm] 2.437”
[61.90mm] 3.125” [79.38mm]
G 0.160” [4.00mm] 0.250” [6.40mm] 0.375” [9.53mm] 0.500”
[12.70mm] 0.750” [19.05mm]
H 0.500” [12.70mm] 0.750” [19.05mm] 0.750” [19.05mm] N/A 0.750
” [19.05mm]
I 6.48” [164.7mm] 8.18” [207.6mm] 8.96” [227.7mm] 10.31”
[261.8mm] 13.23” [336.1mm]
J 2.44” [61.9mm] 2.77” [70.4mm] 2.83” [72.0mm] 3.21” [81.5mm]
3.56 [90.5mm]
K 1.19” [30.1mm] 1.31” [33.3mm] 1.31” [33.3mm] 1.69” [42.8mm]
1.75” [44.5mm]
L 0.312” [7.92mm] 0.312” [7.92mm] 0.312” [7.92mm] 0.437”
[11.10mm] 0.500” [12.70mm]
M 2.375” [60.33mm] 2.875” [73.03mm] 3.250” [82.55mm] 3.812”
[96.825mm] 4.750” [120.65mm]
N 0.125” [3.18mm] 0.125” [3.18mm] 0.125” [3.18mm] 0.187”
[4.75mm] 0.187” [4.75mm]
O 2.19” [55.6mm] 2.75” [69.9mm] 2.92” [74.2mm] 3.72” [94.5mm]
4.500” [114.30mm]
P 1/8”-27 NPT
[G1/8”-28 BSPP]
1/4”-18 NPT
[G1/4”-19 BSPP]
3/8”-18 NPT
[G3/8”-19 BSPP]
1/2”-14 NPT
[G1/2”-14 BSPP]
3/4”-14 NPT
[G3/4”-14 BSPP]
Q 0.549” [13.94mm] 0.689” [17.50mm] 0.811” [20.60mm] 0.967”
[24.56mm] 1.485” [37.72mm]
R 0.730” [18.54mm] 1.374” [34.90mm] 1.374” [34.90mm] N/A 1.374
” [34.90mm]
S #4-40 [M3x0.5] #10-24 [M5x0.8] #10-24 [M5x0.8] N/A #10-24
[M5x0.8]
T 1/4”-20 [M6x1.0] 5/16”-18 [M8x1.25] 5/16”-18 [M8x1.25] 5/16”
-18 [M8x1.25] 3/8”-16 [M10x1.5]
U N/A 5.75” [146.0mm] 6.30” [159.9mm] 7.29” [185.3mm] N/A
V N/A 0.908” [23.06mm] 1.030” [26.16mm] 1.186” [30.12mm] N/A
19
phone 866.700.3784 | web www.dsti.com
R
S
? b.c.
45.00o
? B ? b.c.
(3x)
(6x)
22.50o
? C b.c.
T
A
E (6x)
? B
(6x)
I
J
K
L
M
N
O
P
?
U
? Q V
? ?
b.c.
b.c. b.c.
C
D F
? G
depth
to
?H
thru ball bearings seals weep ports
GP 8 Flow Passage: Dimensions
GP-180 [GPM-180] GP-280 [GPM-280] GP-380 [GPM-380] GP-480 [GPM-
480]
A 0.281” [7.14mm] 0.344” [9.00mm] 0.344” [9.00mm] 0.344”
[9.00mm]
B 3.437” [87.30mm] 4.250” [107.95mm] 4.937” [125.40mm] 5.625”
[142.88mm]
C 3.000” [76.20mm] 3.625” [92.08mm] 4.312” [109.52mm] 5.000”
[127.00mm]
D 3.250” [82.55mm] 3.397” [100.00mm] 4.624” [117.45mm] 5.250”
[133.35mm]
E 2-015 O-Ring [14.00mm] 2-017 O-Ring [17.17mm] 2-019 O-Ring
[20.35mm] 2-023 O-Ring [26.70mm]
F 1.812” [46.02mm] 2.125” [53.98mm] 2.500” [63.50mm] 2.875”
[73.03mm]
G 0.160” [4.00mm] 0.250” [6.40mm] 0.375” [9.53mm] 0.500”
[12.70mm]
H N/A N/A N/A N/A
I 7.49” [190.2mm] 9.61” [244.1mm] 10.93” [277.6mm] 12.45”
[316.2mm]
J 2.32” [58.9mm] 2.77” [70.4mm] 3.07” [77.9mm] 3.29” [83.5mm]
K 1.19” [30.1mm] 1.31 [33.3mm] 1.63 [41.3mm] 1.69 [42.8mm]
L 0.312” [7.92mm] 0.312” [7.92mm] 0.375” [9.53mm] 0.437”
[11.10mm]
M 2.625” [66.68mm] 3.125” [79.38mm] 3.625” [92.08mm] 4.250”
[107.95mm]
N 0.125” [3.18mm] 0.125” [3.18mm] 0.187” [4.75mm] 0.187”
[4.75mm]
O 2.55” [64.72mm] 2.92” [74.20mm] 3.60” [91.44mm] 4.00”
[101.60mm]
P 1/8”-27 NPT
[G1/8”-28 BSPP]
1/4”-18 NPT
[G1/4”-19 BSPP]
3/8”-18 NPT
[G3/8”-19 BSPP]
1/2”-14 NPT
[G1/2”-14 BSPP]
Q 0.549” [13.94mm] 0.689” [17.50mm] 0.811" [20.60] 0.967”
[24.56mm]
R N/A N/A N/A N/A
S N/A N/A N/A N/A
T 1/4”-20 [M6x1.0] 5/16”-18 [M8x1.25] 5/16”-18 [M8x1.25] 5/16”
-18 [M8x1.25]
U N/A 7.12" [181.0mm] 8.15" [207.1mm] 9.31" [236.4mm]
V N/A 0.908” [23.06mm] 1.030” [26.16mm] 1.186” [30.12mm]
20
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
GP SERIES
Rotary Union Solutions
C
22.50o
? b.c.
45.00o
?B
T(6x)
? F b.c
A
E (8x)
? G
depth
?B
(6x)
? C b.c
P J
K
L Q
M
N
O
I
?
U
V
?D b.c
to
ball bearings seals weep ports
GP 10 Flow Passage: Dimensions
GP-201-10 [GPM-201-10] GP-301-10 [GPM-301-10]
A 3.500” [88.90mm] 4.500” [114.30mm]
B 0.250” [6.40mm] 0.375” [9.53mm]
C 4.000” [101.6mm] 4.937” [125.40mm]
D 0.750” [19.05mm] 0.750” [19.05mm]
E 0.250” [6.40mm] 0.375” [9.53mm]
F 5/6”- 18 [M8x1.25] 5/6”- 18 [M8x1.25]
G 11.91” [302.6mm] 13.62” [346.0mm]
H 6.70” [170.2mm] 7.48” [190.0mm]
I 2.62” [66.5mm] 2.85” [72.4mm]
J 1.00” [25.4mm] 1.250” [31.75mm]
K 0.500” [12.70mm] 0.687” [17.45mm]
L 0.753" [19.13mm] 0.875" [22.23mm]
M 1/4”-18 NPT
[G1/4”-19 BSPP]
3/8”-18 NPT
[G3/8”-19 BSPP]
N 0.713” [18.11mm] 0.875" [22.96mm]
O 3.687” [93.65mm] 3.937” [100.00mm]
P 1.374” [34.90mm] 1.374” [34.90mm]
Q #10-24 [M5x0.8] #10-24 [M5x0.8]
R 1/4”-20 [M6x1.0] 5/16”-18 [M8x1.25]
S 3.250” [82.55mm] 3.250” [82.55mm]
T 7.66” [194.5mm] 8.58” [217.9mm]
U 4.000” [101.6mm] 4.687" [119.05]
21
phone 866.700.3784 | web www.dsti.com
45.00o
60.00o
(typ.)
U
O
?
?
Q
R
(3x)
(6x)
? P b.c.
? S b.c.
J
K
I
L
M
N
ball bearings weep ports seals
H
G T
36.00o
(typ.)
? A b.c.
? E to
depth
? D
thru
? C
? B to
intersect
F (10x)
36.00o
(typ.)
GP 12 Flow Passage: Dimensions
GP-201-12 [GPM-201-12] GP-301-12 [GPM-301-12]
A 4.000” [101.60mm] 4.500” [114.30mm]
B 0.250” [6.40mm] 0.375” [9.53mm]
C 4.437” [112.70mm] 4.937” [125.40mm]
D 0.750” [19.05mm] 0.750” [19.05mm]
E 0.250” [6.40mm] 0.375” [9.53mm]
F 5/6”- 18 [M8x1.25] 5/6”- 18 [M8x1.25]
G 13.38” [339.8mm] 15.37” [390.5mm]
H 7.45” [170.2mm] 8.36” [212.2mm]
I 2.62” [66.5mm] 2.85” [72.4mm]
J 1.00” [25.40mm] 1.25” [31.75mm]
K 0.500” [12.70mm] 0.687” [17.45mm]
L 0.753" [19.13mm] 0.875" [22.23]
M 1/4”-18 NPT
[G1/4”-19 BSPP]
3/8”-18 NPT
[G3/8”-19 BSPP]
N 0.713” [18.11mm] 0.875" [22.23]
O 3.687” [93.65mm] 3.937” [100.00mm]
P 1.374” [34.90mm] 1.374” [34.90mm]
Q #10-24 [M5x0.8] #10-24 [M5x0.8]
R 1/4”-20 [M6x1.0] 5/16”-18 [M8x1.25]
S 3.250” [82.55mm] 3.250” [82.55mm]
T 8.41” [213.8mm] 9.46” [240.2mm]
U 4.437” [112.70mm] 4.687” [119.05mm]
60.00o
(typ.)
U
O
?
?
Q
R
(3x)
(6x)
? P b.c.
? S b.c.
45.00o
22
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
GP SERIES
Rotary Union Solutions
J
K
I
L
M
N
seals
ball bearings
G
H T
weep ports
30.00o
(typ.)
? A b.c.
F (12x)
? E to
depth
? D
thru
C ?
? B to
intersect
30.00o 15.00°
(typ.)
GP Optional Equipment
A
Optional slip ring cap
Model A B C D
GP-121 0.875” [22.2mm] 2.937” [74.6mm] 2.375” [60.33mm] 1/4”-
20 [M6x1.0]
GP-131 0.875” [22.2mm] 2.937” [74.6mm] 2.375” [60.33mm] 1/4”-
20 [M6x1.0]
GP-141 0.875” [22.2mm] 2.937” [74.6mm] 2.375” [60.33mm] 1/4”-
20 [M6x1.0]
GP-161 0.875” [22.2mm] 3.187” [80.9mm] 2.625” [66.68mm] 1/4”-
20 [M6x1.0]
GP-201-10 1.375” [34.9mm] 3.687” [93.6mm] 3.250” [82.55mm] 1/4
”-20 [M6x1.0]
GP-201-12 1.375” [34.9mm] 3.687”[93.6mm] 3.250” [82.55mm] 1/4”
-20 [M6x1.0]
GP-221 1.375” [34.9mm] 3.750” [95.3mm] 3.250” [82.55mm]
5/16”-18 [M8x1.25]
GP-231 1.375” [34.9mm] 3.750” [95.3mm] 3.250” [82.55mm]
5/16”-18 [M8x1.25]
GP-241 1.375” [34.9mm] 3.750” [95.3mm] 3.250” [82.55mm]
5/16”-18 [M8x1.25]
GP-261 1.375” [34.9mm] 4.000’ [101.6mm] 3.375” [85.73mm] 5/16”
-18 [M8x1.25]
GP-301-10 1.375” [34.9mm] 4.937” [125.4mm] 3.250” [82.55mm]
5/16”-18 [M8x1.25]
GP-301-12 1.375” [34.9mm] 3.937” [100.0mm] 3.250” [82.55mm]
5/16”-18 [M8x1.25]
GP-321 1.375” [34.9mm] 4.187” [106.3mm] 3.625” [92.08mm] 5/16”
-18 [M8x1.25]
GP-331 1.375” [34.9mm] 4.187” [106.3mm] 3.625” [92.08mm] 5/16”
-18 [M8x1.25]
GP-341 1.375” [34.9mm] 4.187” [106.3mm] 3.625” [92.08mm] 5/16”
-18 [M8x1.25]
GP-361 1.375” [34.9mm] 4.250” [107.9mm] 3.625” [92.08mm] 5/16”
-18 [M8x1.25]
GP-421 1.375” [34.9mm] 4.937” [125.4mm] 4.125” [104.78mm] 5/16
”-18 [M8x1.25]
GP-431 1.375” [34.9mm] 4.937” [125.4mm] 4.125” [104.78mm] 5/16
”-18 [M8x1.25]
GP-441 1.375” [34.9mm] 4.937” [125.4mm] 4.125” [104.78mm] 5/16
”-18 [M8x1.25]
GP-561 1.375” [34.9mm] 6.437” [163.5mm] 5.625” [142.88mm] 3/8”
-16 [M10x1.50]
GP-621 1.375” [34.9mm] 7.187” [182.5mm] 6.000” [152.40mm] 1/2”
-13 [M12x1.75]
GP-641 1.375” [34.9mm] 7.187” [182.5mm] 6.000” [152.40mm] 1/2”
-13 [M12x1.75]
Standard nylon cord grip
Optional compact
slip ring (ES / ESM)
C
? B ?
D (2x)
23
phone 866.700.3784 | web www.dsti.com
b.c
Slip ring adapter
Wire bundles for EST series
5.467” (138.9 mm)
4.940” (125.5 mm)
4.010” (101.9 mm)
3.070” (77.9 mm)
2.130”(54.1 mm)
EST6
EST12
EST18
EST24
Optional thru bore slip ring
6, 12, 18, or 24 circuits
Wire bundles for EST series
2.45”
(62.2 mm)
.313” (7.95 mm) screw or
pin for slip ring anti-rotate
?
Recommended
1.00” minimum
clearance
24
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
GP SERIES
Rotary Union Solutions
GP Optional Equipment
Electrical Slip Ring Options
25
+ Ethernet Slip Rings Available
+ 100 BaseT & 1000 BaseT Ethernet Connections
+ High Quality Gold on Gold Contacts
+ Capsule & Thru-bore Options
+ Low Electrical Noise
+ Analog/Digital Transfer
+ Cord Sets & Pin Connectors Options
+ Compatible With a Range of Data Bus Protocols
AVAILABLE SLIP RINGS1
PART # # OF
CIRCUITS
MAX AMPS/
CIRCUIT
MAX VOLTS/
CIRCUIT
ES6A 6 2 120
ES6 6 2 210
ES12A 12 2 120
ES12 12 2 210
ES18 18 2 210
ES24 24 2 210
ES36 36 2 210
ES56 56 2 210
ESE64 2 10 (6x) 2A 240
ESE264 2 12 (2x) 5A, (6x) 2A 240
ESE224 2 8 (2x) 10A, (2x) 2A 240
ESE2124 2 18 (2x) 5A, (12x) 2A 240
ESE284 2 14 (2x) 10A, (8x) 2A 240
ESE438 3 51 (43x) 2A 240
ESE4358 3 47 (4x) 5A, (35x) 2A 240
ESE2358 3 45 (2x) 10A, (35x) 2A 240
ESE8278 3 43 (8x) 5A, (27x) 2A 240
ESE24278 3 41 (2x) 10A, (4x) 5A,
(27x) 2A
240
PART # # OF
CIRCUITS
MAX AMPS/
CIRCUIT
MAX VOLTS/
CIRCUIT
ESM36 9 (3x) 10A, (6x) 2A 210
ESM312 15 (3x) 5A, (12x) 2A 210
ESM420 24 (4x) 10A, (20x) 2A 210
ESM428 32 (4x) 5A, (28x) 2A 210
ESM440 44 (4x) 10A, (40x) 2A 210
ESM448 52 (4x) 5A, (48x) 2A 210
EST6 6 10 600
EST12 12 10 600
EST18 18 10 600
EST24 24 10 600
ESET4 2 4 Ethernet Only 600
ESET8 3 8 Ethernet Only 600
ESET68 3 14 (6x) 10A 600
ESET128 3 20 (12x) 10A 600
ESET184 2 22 (18x) 10A 600
1 All slip ring lead wire lengths are 48” (1219mm)
EST / ESET slip rings are 36" (914mm)
2 100 BaseT Ethernet connections
3 1000 BaseT Ethernet connections
phone 866.700.3784 | web www.dsti.com
26
SPS
SERIES
LT
SERIES
SE
SERIES
GP
SERIES
SCS
SERIES
HVH
SERIES
HPS
SERIES
GP SERIES
Rotary Union Solutions
PREPARATION:
Remove the rotary union from the shipping container. Inspect
the entire assembly, including all passage connections to make
sure that they are clean and no visual damage occurred during
transport. If the assembly is a rotary union/electrical slip
ring, the
electrical slip ring may be packaged separately to protect during
shipping. If this is the case, mount the electrical slip ring to
the
rotating union assembly using the supplied hardware.
RECOMMENDED ROTARY UNION INSTALLATION PRACTICE:
DSTI does not recommend mounting the rotary union with both
the shaft & housing components solidly bolted into place. One of
the two components should be mounted in a manner that allows
for some movement in the event of misalignment or run-out during
rotation. Using only the supply lines or hoses to fi x the
stationary
component in place is also not recommended. An anti-rotation
arm that attaches to the stationary part of the rotary union
assembly and rests against part of the equipment framework is
recommended (see fi gure 1.1).
MOUNTING A ROTARY UNION
W/ AN ELECTRICAL SLIP RING:
Make sure the electrical wiring is fi xed in place and protected
from
contact with other components or equipment. Care should be
taken to make sure the slip ring area remains clean and dry
during
use.
SHAFT MOUNTING: O-RING MANIFOLD TYPE:
Make sure the rotary union shaft face & equipment mounting
surface is clean and free from dents or chips to insure proper
installation. Equipment pilot bore needs to be concentric to the
center line of the rotary union shaft to assure proper function.
Install face mount O-rings into groove or counter bore in
rotating
union shaft face. General assembly grease can be used as needed
to hold O-rings into place during assembly. Align rotary union
shaft
with equipment pilot bore and fl ow passages, then insert into
place. Bolt assembly into place using tapped holes or mounting
fl ange on rotary union face.
SHAFT MOUNTING, THREADED CONNECTIONS:
When mounting the shaft using threaded connections, make sure
all fi ttings are properly tightened & pipe thread sealant is
used as
required. Equipment mounting surface needs to be concentric to
the center line of the rotary union shaft to assure proper
function.
After all fi ttings are in place, bolt assembly into place using
tapped
holes or mounting fl ange on rotating union shaft.
INITIAL START-UP:
After rotary union is installed, a dry run is recommended to
assure
proper mounting of the rotating union assembly. Begin rotation
of the equipment, and verify that while rotating at the maximum
operating speed there is no visible movement of the rotary union
assembly due to misalignment.
Installation & Mounting
[FIGURE 1.1
THESE INSTRUCTIONS ARE INTENDED TO BE USED AS A GENERAL
GUIDE, PLEASE CONSULT THE FACTORY TO DISCUSS ANY SPECIFIC
QUESTIONS RELATED TO YOUR INSTALLATION.
WARRANTY:
DSTI Warrants, for a period of 2 years from the date of original
delivery, its products to be free from defects in material
and workmanship. DSTI’s obligation under this warranty is
limited to repair or replacement at it’s factory of any part or
parts of said products which shall be returned to DSTI with
transportation charges prepaid and which DSTI’s examination
shall disclose to it’s satisfaction to have been defective.
Under no circumstances shall DSTI be held liable for loss,
damage, cost of repair of consequential damages of any
kind in connection with the sale, use or repair of any product
purchased from DSTI. Warranty is subject to change.
27
phone 866.700.3784 | web www.dsti.com
DSTI has partnered with GE, NASA, 3M, Halliburton,
the U.S. Army and numerous other organizations and
fortune 500 companies – with hundreds of unique and
specialized designs successfully operating in a diverse
range of critical environments and applications.
Adhering to stringent quality assurance procedures
and verifi cation processes, our team designs and
manufactures purpose-built rotary union and electrical
slip ring products tailored to meet application-specifi c
performance requirements.
Proven Expertise. Trusted Solutions.
Did You Know?
? All Design, Manufacturing, Inspection,
Assembly, & Testing are Performed In-House
DYNAMIC SEALING
TECHNOLOGIES, INC
main 763.786.3758
toll free 866.700.3784
fax 763.786.9674
www.dsti.com
For more information and
CAD/PDF downloads, please visit:
At DSTI, our product solutions are
directly infl uenced by the industries
we serve. If an existing product
isn’t a perfect fi t for our customers’
applications, we provide specialized
design and manufacturing services to
meet the needs of their specifi cations.
To see examples of our specialized
solutions, please visit:
Engineered to
your Needs
13829 Jay Street NW
Andover, MN 55304
USA
? 2013
All Rights Reserved
Revision 1.3
Publish Date: 11/22/2013 156-500508-047/CAT NO MTI-3150E4TPXX 美
国chromalox
| 
放大图片
