西门子电源模块6SL3130-6AE15-0AB1

SINAMICS S120 Smart Line Module 输入：3AC 380-480V,50/60Hz 输出:600V DC，8.3A，5kW 结构形式：书本尺寸 内部风冷 包括控制电压适配器 组件 涂漆.

西门子代理商供应  现货 

6SL3130-6AE15-0AB1

西门子代理商现货供应 

原装正品  质保一年

上海斌勤电气技术有限公司

发布人：康奎 （销售经理）发布

本公司签约正式的销售合同，并开具13%的增-值-税-发-票。

外地客户统一采用快递发货,也支持上门提货，货物快递到您手时候,一定要开箱检验!如有损坏,请拒绝签收,并由快递公司返回!

在你签收后表示你对该货物没有异议!我们会给予您检测时间,并请在货物到给予确认,谢谢合作!

产品均为密封包装，外包装详见产品图片，白色标签上均有产品订货号和产地，各位买家在收到货后，请核对型号，无误后再拆包装、

本公司宗旨：本着以诚信为本，以顾客为中心.质量保证·服务诚信·价格实惠.

为用户提供专业的自动化产品及服务！

相关西门子产品技术：

Smart Line Modules in booksize format

产品信息

跳转到

概述

设计

集成

技术规范

特性曲线

概述

Smart Line Modules are stall-protected, line-commutated infeed/regenerative feedback units (diode bridge for incoming supply; stall-protected, line-commutated regenerative feedback via IGBTs) with 100 % continuous regenerative feedback power. The regenerative feedback capability of the modules can be deactivated by means of a digital input (Smart Line Modules 5 kW and 10 kW) or by means of parameterization (Smart Line Modules 16 kW, 36 kW and 55 kW). Smart Line Modules are designed for connection to grounded TN/TT systems and non-grounded IT systems.

The DC link is pre-charged via integrated precharging resistors.

The associated line reactor is required for operating a Smart Line Module.

设计

The Smart Line Modules in booksize format feature the following connections and interfaces as standard:

1 power connection via screw-type terminals

1 connection for the 24 V DC electronics power supply via the 24 V terminal adapter included in the scope of supply

1 DC link connection via integrated DC link busbars

2 PE (protective earth) connections

2 digital inputs

(only for Smart Line Modules 5 kW and 10 kW)

1 digital output

(only for Smart Line Modules 5 kW and 10 kW)

3 DRIVE?CLiQ sockets

(only for Smart Line Modules 16 kW, 36 kW and 55 kW)

1 temperature sensor input for KTY84?130, Pt1000 or PTC (only for Smart Line Modules 16 kW, 36 kW and 55 kW, Pt1000 can be used from firmware V4.7 HF17)

The status of the Smart Line Modules is indicated via two multi-color LEDs.

The signal cable shield can be connected to the Line Module by means of a shield connection terminal, e.g. Weidmüller type KLBü 3-8 SC.

The scope of supply of the Smart Line Modules includes:

DRIVE?CLiQ cable for connecting the module to the adjacent Control Unit on the left with the drive control, length 0.11 m (4.33 in)

(only for Smart Line Modules 16 kW, 36 kW and 55 kW)

2 blanking plugs for closing unused DRIVE-CLiQ sockets

(only for Smart Line Modules 16 kW, 36 kW and 55 kW)

DRIVE?CLiQ cable (length depends on Smart Line Module width) for connection to the adjacent Motor Module, length = width of Smart Line Module + 0.11 m (4.33 in)

Jumper for connecting the 24 V DC busbar to the adjacent Motor Module

24 V terminal adapter (X24)

Connector X21 for digital inputs and outputs

Connector X22 for digital inputs and outputs

(only for Smart Line Modules 5 kW and 10 kW)

Connector X1 for line connection

(only for Smart Line Modules 5 kW and 10 kW)

1 set of warning labels in 30 languages