加工产品种类转轴
加工方式任何方式
展开
供应转轴支架
点我去除广告
1. top level assy - reference documents:
2x702 spec, eng, std, sv-strg, dfe
11500 spec, inbound packing standard
13190 spec, splr, brcd, lbl (use if shipped directly to dell factories)
6724u spec, dell, cosmetic, corp-std
6t198 spec, dfe, restricted-mtl
yt929 spec,doc,lbl,coo
xxxxx princeville platform cosmetic specification
eng0000016 doc,qual,mech
eng0000319 doc,prc,spec,hdw,press-in,eng
asme y14.5m-1994 dimensioning and tolerancing
2. the materials and manufacturing methods used in the
fabrication of this assembly must comply with dell
specification 6t198. the materials must also comply
with dell environment specification 2x702.
3. interpret dimensions per asme y14.5m-1994.
4. unless otherwise specified, dimensions are related to datum
a (primary), datum b (secondary), and datum c (tertiary).
5. drawing for inspection purposes only. actual part shall
conform to electronic database. unless otherwise specified
shown dimensions shall conform to table 1.0.
critical to ta and process dimension: these dimensions shall
be used for determination and qualification of process capability
(cp, cpk) per the dell ppap process (agile p/n eng0000016).
critical to function and assembly fit dimension.
6. assembly shall conform to dell cosmetic spec 6724u and the
platform specific cosmetic spec xxxxx. all surfaces are
class 3 unless otherwise specified.
7. parts are to be clean and free from foreign material. dirt,
oil, grease, or other contaminants are not allowed.
8. proper assembly of all tab and slot joints to be verified.
sheared edges adjacent to tab features shall contact mating
part.
9. attach ppid label approximately where shown and always in
the same orientation. label shall conform to dell spec 13190,
type (a, b, c, e, f, h, n or o).
10. attach coo (contry of origin) label aproximatel where shown
and always in the same orientation. label shall conform to
dell spec yt929
11. parts shall be packaged for supplier internal consumption.
12. hinge torque：75~80kgf-cm(include spring)
spring torque:50~55kgf-cm
13. stand tilt forward angle：-2°~-5°
stand tilt backward angle: 27°~30°
14. monitor tilt forward angle：-2°~-5°
monitor tilt backward angle: 27°~30°
15. monitor tilt push force:3.0±0.5kgf
16. shipping angle:tilt backward angle: 27°~30°
17. working angle life test： 3500 cycles（decay less than 15%）
every 500 cycles test force/ frequency 8 times per minutes
18. swivel force: 3.0±0.5kgf （table：wood）
19. tip test angle 11°（screen angle -5°& 30°）
20. system slant angle <=0.5°<>
stand slant angle<=0.4°<>
21. wobble test1kg≤1.5s
2kg <= 3s no clamp base
22.total weight 2600±50g