POM永久抗静电料

华韵公司POM导电防静电日本宝理M25-04挤压级
华韵公司POM导电防静电日本宝理NW-02高滑动
华韵公司POM导电防静电日本宝理KT-20无机物填充 ***
华韵公司POM导电防静电日本宝理GB-25玻璃珠增强 低翘曲
华韵公司POM导电防静电日本宝理SX-35质软 消音
华韵公司POM导电防静电日本宝理GH-20玻纤增强 高强度 高刚性
华韵公司POM导电防静电日本宝理EB-20***
华韵公司POM导电防静电日本宝理M270-48*** 高流动性
华韵公司POM导电防静电日本宝理M270高流动性 短周期
华韵公司POM导电防静电日本宝理M90-48***

参数介绍：（中英文）

General  
Material Status  ? Commercial: Active
Literature 1  ? Processing - Molding (English)
? Technical Datasheet - ISO (English)
 

UL Yellow Card 2  ? E45034-235719

Availability  ? Asia Pacific ? Europe ? North America

Additive  ? Antistatic ? Carbon Black (5%) 

Features  ? Antistatic ? Electrically Conductive 

UL File Number  ? E45034
Forms  ? Pellets
Processing Method  ? Injection Molding
Part Marking Code (ISO 11469) ? >POM-CD5<
Physical Nominal Value Unit Test Method
Density 1.41 g/cm? ISO 1183
Water Absorption (23°C, 24 hr) 1.3 % ISO 62
Mechanical Nominal Value Unit Test Method
Tensile Stress 49.0 MPa ISO 527-2
Tensile Strain (Break) 7.5 % ISO 527-2
Flexural Modulus 2800 MPa ISO 178
Flexural Strength 84.0 MPa ISO 178
Coefficient of Friction     JIS K7218
vs. Steel - Dynamic 3 0.47    
vs. Unknown - Dynamic 4 0.43    
Wear Factor     JIS K7218
0.98 MPa, 0.30 m/sec 5 <1.0 10^-8 mm?/N?m  
0.060 MPa, 0.15 m/sec 6 40 10^-8 mm?/N?m  
0.98 MPa, 0.30 m/sec 7 80 10^-8 mm?/N?m  
0.060 MPa, 0.15 m/sec 8 1200 10^-8 mm?/N?m  
Impact Nominal Value Unit Test Method
Charpy Notched Impact Strength 3.0 kJ/m? ISO 179/1eA
Thermal Nominal Value Unit Test Method
Heat Deflection Temperature (1.8 MPa, Unannealed) 109 °C ISO 75-2/A
CLTE     No Standard
Flow : 23 to 55°C 0.00011 cm/cm/°C  
Transverse : 23 to 55°C 0.00011 cm/cm/°C  
Electrical Nominal Value Unit Test Method
Surface Resistivity 5.0E+2 ohm Internal Method
Volume Resistivity 1.0E+2 ohm?cm Internal Method
Flammability Nominal Value Unit Test Method
Flame Rating HB   UL 94
Additional Information Nominal Value    
Color Number CD3501    
Injection Nominal Value Unit  
Drying Temperature 80.0 to 90.0 °C  
Drying Time 3.0 to 4.0 hr  
Processing (Melt) Temp 190 to 210 °C  
Mold Temperature 60.0 to 80.0 °C  
Injection Pressure 49.0 to 98.0 MPa  
Screw Speed 100 to 150 rpm  
Injection Notes
Injection speed: 5-50 mm/s
Injection Holding pressure: Gate sealing time + alpha
Cooling: Plasticizing time or ejection capable time
Notes
1.. We work hard to keep them up to date; .
2  UL Yellow Card contains UL-verified flammability and electrical characteristics. 30.98 MPa, 30 cm/s
4 vs. M90-44, 0.06 MPa, 15 cm/s
5 vs C-Steel, Steel Side
6 vs M90-44, M90-44 Side
7 vs C-Steel, Material Side
8 vs M90-44, Material Side