TPU|德国拜耳|3385吹塑级
TPU|德国拜耳|3385吹塑级
产品价格:¥30(人民币)
  • 规格:3385
  • 发货地:广东东莞市
  • 品牌:
  • 最小起订量:1千克
  • 诚信商家
    会员级别:钻石会员
    认证类型:企业认证
    企业证件:通过认证

    商铺名称:东莞市华韵塑胶原料有限公司

    联系人:郭琳(小姐)

    联系手机:

    固定电话:

    企业邮箱:934235608@qq.com

    联系地址:东莞市樟木头镇奥园塑金国际16栋110室

    邮编:523639

    联系我时,请说是在电子快手网上看到的,谢谢!

    商品详情

      TPU|德国拜耳|3385吹塑级

      TPU作为弹性体是介于橡胶和塑料之间的一种材料,这从它的刚性看出来,TPU的刚性可由弹性模量来度量。橡胶的弹性模量通常在1~10MpaTPU10~1000Mpa,塑料(尼龙,ABSPCPOM)在1000~10000MpaTPU的硬度范围相当宽,从Shore A 60~Shore D 80并且在整个硬度范围内具有高弹性;TPU在很宽的温度范围内-40~120℃,具有柔性,而不需要增塑剂; TPU对油类(矿物油,动植物油脂和润滑油)和许多溶剂有良好的抵抗能力;TPU还有良好的耐天候性,极优的耐高能射线性能。众所周知的耐磨性,抗撕裂性,屈扰强度都是优良的;拉伸强度高,伸长率大,长期压缩永久变形率低等都是TPU的显著优点。TPU华韵塑料供应商高韧性 挤出级 吹塑级TPU德国拜耳 1960AW 特性:注塑级,良好的耐磨性; 
      TPU华韵塑料供应商高韧性 挤出级 吹塑级TPU德国拜耳 1970AW 特性:注塑级,良好的耐磨性;
      TPU华韵塑料供应商高韧性 挤出级 吹塑级TPU德国拜耳:487、192、260、285、3385、345、 359、365、385、390、460、481、790
      TPU华韵塑料供应商高韧性 挤出级 吹塑级TPU德国拜耳:5377A、3491A、6386A、8792A、8798A
      TPU华韵塑料供应商高韧性 挤出级 吹塑级TPU德国拜耳 390X 特性:注射、挤出、吹塑,具有稳定性和易脱模的挤塑品级; 
      TPU华韵塑料供应商高韧性 挤出级 吹塑级TPU德国拜耳 985U 特性:耐磨性、良好的抗热和紫外线降解的稳定性、的抗水解稳定性和抗微生物性。 
      TPU华韵塑料供应商高韧性 挤出级 吹塑级TPU德国拜耳 990R 特性:耐磨性、的抗水解稳定性和抗微生物性。 
      TPU华韵塑料供应商高韧性 挤出级 吹塑级TPU德国拜耳 385E 特性:挤出级,高机械强度。 
      TPU华韵塑料供应商高韧性 挤出级 吹塑级TPU德国拜耳 3055D 特性:注塑级,极好的抗磨损性,良好的耐磨性。 
      TPU华韵塑料供应商高韧性 挤出级 吹塑级TPU德国拜耳 3059D 特性:注塑级,极好的抗磨损性,良好的耐磨性。 
      TPU华韵塑料供应商高韧性 挤出级 吹塑级TPU德国拜耳 3060A 特性:注塑级,不受增塑剂,低磨损。 
      TPU华韵塑料供应商高韧性 挤出级 吹塑级TPU德国拜耳 3065D 特性:注塑级,高机械强度,极好的抗磨损性,耐磨性。 

      Polyurethane TPU properties introduced here include three aspects: Mechanical Properties, Physical Properties and environmental properties; 1. Mechanical Properties: TPU Elastomer Mechanical Properties mainly include: Hardness, tensile strength, compression properties, tear strength, resilience and wear resistance, 



      flexure resistance, and so on, while elastic plastic TPU mechanical properties, in addition to these properties, there are higher shear strength and impact work. Hardness: Hardness is an indicator of a material's ability to resist deformations, Nicks, and scratches. TPU hardness is usually measured with Shore a and Shore d hardness meters, Shore a for softer TPU, Shore D for harder TPU. Hardness is mainly determined by the hard segment content in TPU structure. The higher the hard segment content, the hardness of TPU will increase. With the increase of hardness, other properties of TPU also changed, tensile Modulus and tear strength increased, rigidity and compressive stress (load capacity) increased, elongation decreased, density and dynamic heat increased, and environmental resistance increased. TPU hardness and temperature have a certain relationship. The hardness of TPU changed little from room temperature to abrupt change temperature (- 4 ~-12 °C) , but it became hard and lost elasticity because of crystallization of soft segment.


    在线询盘/留言
  • 0571-87774297