商铺名称：深圳市汇驰恒达科技有限公司
联系人：陈维（先生）
联系手机：
固定电话：
企业邮箱：market@hch-test.com
联系地址：深圳市龙华区龙华街道油松社区油松路兴龙富创客园大厦4层418
邮编：518000
联系我时，请说是在电子快手网上看到的，谢谢！
- 1 GHz and 500 MHz probe bandwidth
- <1 pF differential input capacitance
- 1 MΩ differential input resistance
- ±42 v (DC + pk AC) differential input voltage
- >18 dB CMRR (at 250 MHz 50X attenuation)
-
Outstanding electrical performance
- Selectable bandwidth-limiting filters
- DC reject
-
Versatile DUT connectivity
- Small compact probe head for probing small geometry circuit elements
- Straight pin, square pin, solder down, variable pitch standard accessories
- Robust design for reliability
-
Easy to use
- Provides automatic units scaling and readout on the oscilloscope display
-
TDP1000, TDP0500
- Connect directly to oscilloscopes with the TekVPI? probe interface
- Easy access to scope-displayed probe menu for probe setup control and operating status information
- Remote GPIB/USB probe control through the oscilloscope
- AutoZero – zeros out output offset
-
P6251
- Connect directly to the TekProbe? interface oscilloscopes, or to TekConnect® oscilloscopes using TCA-BNC adapter
- High-speed switch mode power supply design
- CAN/LIN bus design
- Digital design and characterization
- Manufacturing engineering test
- Research and development
- Outstanding Electrical Performance
- Versatile Device-Under-Test Connectivity
- Ease of Use
The TDP1000, TDP0500, and P6251 High-voltage Differential Probes provide excellent high-speed electrical and mechanical performance required for today's Switch Mode Power Supply (SMPS), CAN/LIN Bus, and high-speed digital system designs.
Key performance specifications
Key features
Applications
High-voltage differential probes
The TDP1000, TDP0500, and P6251 High-voltage Differential Probes are specifically designed for use with and direct connection to Tektronix oscilloscopes with either the TekVPI? probe interface, or TekProbe BNC Interface. These probes achieve high-speed signal acquisition and measurement fidelity by solving three traditional measurement challenges:
|
|
|
|
|
Tektronix is registered to ISO 9001 and ISO 14001 by SRI Quality System Registrar. |
|
|
Product(s) complies with IEEE Standard 488.1-1987, RS-232-C, and with Tektronix Standard Codes and Formats.
SpecificationsAll specifications are guaranteed unless noted otherwise. All specifications apply to all models unless noted otherwise. Warranted characteristicsBandwidth (probe only)TDP1000, P62511 GHzTDP0500500 MHzAttenuation5X, 50XDifferential mode input voltage±42 v (DC + pk AC); 30 VrmsRise time (probe only)TDP1000, P6251≤350 psTDP0500<700 psCMRR>55 dB at 30 kHz>50 dB at 1 MHz >18 dB at 250 MHz (warranted at 50X attenuation) Max input voltage (nondestruct)±100 V (DC + pk AC)Gain accuracy at DC±2%Typical characteristicsDifferential input capacitance≤1 pFDifferential input resistance1 MΩSensitivity/noise level5X attenuation2 mVrms10 mVrms(referred to the probe output) 50X attenuation1 mVrms50 mVrms(referred to the probe output) Propogation delay6.5 nsCommon mode input voltage±35 v (DC + pk AC); 25 VrmsDifferential input offset rangeTDP1000, TDP0500±42 V (5X or 50X attenuation)P6251±4.25 V (5X attenuation)±42 V (50X attenuation) DC reject5X attenuation0.4 Hz50X attenuation4 HzNominal characteristicsSelectable bandwidth filter limitsTDP1000, TDP0500100 Hz, 10 kHz, 1 MHz, FullP62515 MHz, FullOscilloscope interface recommendationsTDP1000, TDP0500TekVPI? Probe 1P6251TekProbe BNC Level IITekConnect® (TCA-BNC required) 1When using MSO/DPO2000/B series, the TekVPI Power supply (Tektronix part number, 119-7465-xx) and power cable is needed. Power requirements
TDP1000, TDP0500Powered directly by oscilloscopes with the TekVPI interface
|
